Datasheet
Table Of Contents
- Front cover
- Specifications
- Dimensions
- Terminals
- Standard setting-up position
- Projection distance for 16:10 aspect ratio screen
- Projection distance for 16:9 aspect ratio screen
- Calculation of the projection distance
- Shift range
- Installable angle
- List of compatible signals
- Serial connector
- Pin assignments and signal names
- Communication conditions (factory setting)
- Basic format
- Cable specifications
- Control commands
- Status request commands
- Command example
- Notes on projector placement and operation
- Direction of air intake and exhaust
- Operating the projector continuously
S P E C F I L E
PT-DW740S/DW740K/DW740LS/DW740LK
DLP
™
Projectors
As of July 2012
SFD12M008
3 / 1 6
RGB 1 IN
R, G, B
Y, P
B, PR (Y, CB, CR)
RGB 2 IN
R, G, B
Y, PB, PR (Y, CB, CR)
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D) PT-DW740S/DW740K
PT-DW740LS/DW740LK
Weight PT-DW740S/DW740K
PT-DW740LS/DW740LK
Operation noise*
2
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
6
Dimensions (W × H × D)
Weight
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) × 1 for link control (RS-232C compliant)
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
3.0 m (9 ft10 in)
Molded plastic
498 × 175*
4
× 466 mm (19-19/32 × 6-7/8*
4
× 18-11/32 inches)
(with supplied lens)
498 × 175*
4
× 432 mm (19-19/32 × 6-7/8*
4
× 17 inches)
(without lens)
Approx. 16.3 kg (35.9 lbs) (with supplied lens)
Approx. 15.4 kg (34.0 lbs) (without lens)
39 dB (dual lamp operation, LAMP MODE: NORMAL),
35 dB (dual lamp operation, LAMP MODE: ECO)
0 – 45 °C (32 – 113 °F)*
5
20%– 80% (no condensation)
3 V DC (R6/AA type battery × 2)
Approx. 30 m (98 ft5 in) when operated from directly in front of the
signal receptor
51 × 176 × 23 mm (2 × 6-15/16 × 29/32 inches)
Approx. 134 g (4.7 oz) (including batteries)