User Guide
Table Of Contents
- TABLE OF CONTENTS
- IMPORTANT SAFETY NOTICE
- PRECAUTIONS WITH REGARD TO SAFETY
- CAUTION
- ACCESSORIES
- PRECAUTIONS ON HANDLING
- NAME AND FUNCTION OF PARTS
- USING THE REMOTE CONTROL UNIT
- INSTALLATION
- CONNECTION
- HOW TO INSTALL AND REMOVE THE PROJECTION LENS (OPTIONAL)
- PROJECTION
- HOW TO ADJUST THE LENS
- AUTOMATIC ADJUSTMENT (AUTO SETUP)
- USING THE FREEZE FUNCTION
- USING THE SHUTTER FUNCTION
- USING THE DIGITAL ZOOM (-D.ZOOM+) FUNCTION
- ON-SCREEN MENUS
- ADJUSTING THE PICTURE
- ADJUSTING THE POSITION
- HOW TO USE ADVANCED MENU
- ADJUSTING THE AUDIO
- CHANGING THE DISPLAY LANGUAGE
- OPTION 1 SETTINGS
- OPTION 2 SETTINGS
- DISPLAYING THE INTERNAL TEST PATTERN
- SETTING THE SECURITY
- SETTING THE NETWORK
- CONNECTING THE PC
- USING THE SERIAL TERMINALS
- USING THE REMOTE 2 TERMINAL
- INDICATION OF LAMP MONITOR
- CLEANING AND REPLACEMENT OF AIR FILTER
- REPLACING THE LAMP UNIT
- USING WEB BROWSER CONTROL
- USING THE PJLINK tm PROTOCOL
- BEFORE ASKING FOR SERVICE
- SPECIFICATIONS
- COMPATIBLE SIGNAL LIST
- PROJECTION DISTANCES BY PROJECTION LENS
- DIMENSIONS
- FRANCAIS INFORMATION
55
Network config page
Set this to ON to enable the
DHCP client function.
Enter the IP address if DHCP
server is not used.
Enter the net mask if DHCP
server is not used.
Enter the gateway address if
DHCP server is not used.
Enter the name of the projector here. Enter the host name
here if it is required when the DHCP server is going to be
used, for instance.
Network status page
Click [Network Setting], then [Network status] to display the Network status page.
Network software version
display
Set IP address display
Set subnet mask display
MAC address display
Network status display