Multimedia Projection Display Operating Instructions Models No. PT-43LC14/PT-50LC14/PT-60LC14 (USA) Three Important Reasons to Register Your Product Immediately! For assistance, please call : 1-888-VIEW PTV(843-9788) 1 or, contact us via the web at: http://www.panasonic.com/contactinfo (Puerto Rico) For assistance, please call : 787-750-4300 or visit us at www.panasonicpr.com Protect Your New Investment...
IMPORTANT SAFETY INSTRUCTIONS &$87,21 5,6. 2) (/(&75,& 6+2&. '2 127 23(1 :$51,1* 7R UHGXFH WKH ULVN RI HOHFWULF VKRFN GR QRW UHPRYH FRYHU RU EDFN 1R XVHU VHUYLFHDEOH SDUWV LQVLGH 5HIHU VHUYLFLQJ WR TXDOLILHG VHUYLFH SHUVRQQHO This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) Getting Started WARNING AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD. CAUTION (1) This projection display is intended to be used with the following TV stand: model TY-43LC14C for the PT-43LC14, TY-50LC14C for the PT-50LC14, and TY60LC14C for the PT-60LC14. Use with other stands may result in the projection display becoming unstable, possibly causing injury.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new projection display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site for USA : www.panasonic.
Table of Contents Replacing the lamp unit ................................................................................................. 73 Warning Indicators ......................................................................................................... 74 Remote Control Quick Reference Guide (Operating peripheral equipment) ............ 75 Troubleshooting ............................................................................................................. 82 Specifications ..........
Before Using Receiver Location This projection display is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Before Using 1. Remote Control 2. Batteries 2 “AA” 3. RGB Cable (2 m) Getting Started Accessories (EUR7627Z20) (LSJA0239-1 or LSJA0443) Remote Control Battery Installation Requires two AA batteries (supplied). 1. While pressing in on the catch, open cover in direction of arrow. 2. Install the batteries as shown in the battery compartment. (Polarity + or - must match the markings in the compartment). 3. Press cover in direction of arrow until it snaps shut.
Location of Controls Illuminated Remote Control POWER SAP 1 TV VCR DVD DTV RCVR DBS/CBL LIGHT 16 17 2 BBE E CH VOL MENU OK CH EXIT 21 22 1 2 3 4 5 6 7 8 R-TUNE 11 12 13 14 15 20 VOL 9 10 18 19 R LL 7 8 PEC T A EC 6 AUX A - ANTENNA - B AS MU T 3 4 5 TV/VIDEO 0 9 PROG 23 SWAP REW SPLIT PLAY SPLIT CTRL FF PAUSE STOP REC FREEZE TV/VCR SPLIT CH DVD/VCR CH SEARCH OPEN/CLOSE 24 25 26 27 28 Note: • This section describes TV mode only.
Location of Controls 1 POWER TV VCR, DVD, DTV, 2 RCVR, DBS/CBL, AUX 3 TV/VIDEO 4 SD 5 ASPECT 6 MUTE 7 VOL ◄► 8 OK 9 MENU 10 Number 11 R-TUNE SWAP 12 REW SPLIT 13 PLAY 14 PAUSE FREEZE 15 TV/VCR 16 SAP 17 LIGHT 18 ANTENNA A/B 19 BBE 20 RECALL 21 EXIT 22 CH ▲▼ 23 PROG SPLIT CTRL 24 FF 25 REC 26 STOP 27 SEARCH OPEN/CLOSE SPLIT CH ▲▼ 28 DVD/VCR CH Getting Started Remote Keys DESCRIPTION Press to turn ON and OFF. Sets the remote to communicate with television.
Location of Controls Controls and Terminals on the projection display Model PT-50LC14 unit shown < FRONT > POWER button/ POWER indicator (PP. 22, 74) Volume up(+) / down(–) buttons (P. 30) Channel up / down buttons (P. 30) TV/VIDEO button (P. 35) A A Using your finger, slide Slot Cover in direction of arrow to open. Open LAMP indicator This indicator lights up when there is a malfunction with the lamp unit. (PP.
Location of Controls < SIDE > < REAR > Vent Getting Started Model PT-50LC14 unit shown Vent RGB Input 1 terminal HDMI Input terminal (For PT-50LC14/PT-60LC14) (P. 20) (P. 18) VHF/UHF terminal (PP. 12-14) Component signal input 1-4 terminals Input 1, 2 terminals (P. 16) (P. 15) AV out terminals (P. 17) RGB (PT-43LC14) or RGB2 (PT-50LC14/ PT-60LC14) Input terminal (P. 18) Input 3 terminals (P. 15) Note: • Make sure the vents are not blocked. (This could cause damage.
Installation Notes on connections • Turn off the power supply for all components before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component carefully before connecting it. • If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker.
Installation Use this configuration when connecting the projection display to a cable TV system. Getting Started Cable Connection CABLE BOX TERMINAL ON THE BACK OF THE CABLE BOX Or In from cable Connect the cable from the antenna or cable system to the VHF/UHF terminal on the back of the projection display. In from cable Notes: • Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception.
Installation Connecting the Antenna / Cable to the RF IN Terminal (VCR) Use this configuration when connecting the projection display to a cable TV system using VCR. Connect the cable from the Output terminal on the back of the Cable Box or antenna/cable system to the Antenna input terminal on the back of the VCR.
Installation Connects VCRs and other peripheral equipment (S-VHS VCR) Getting Started How to connect the “1, 2, 3” Input Terminals S-VIDEO AUDIO Similar connections are available at the INPUT 1, 2, 3 input terminals. (P. 11) (VHS VCR) VIDEO AUDIO Similar connections are available at the INPUT 1, 2, 3 input terminals. Notes: • • • • Similar connections are available at the INPUT 1, 2, 3 input terminals. Input 3 is located on the side of the unit.
Installation How to connect the COMPONENT VIDEO Input Terminals Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction. The Component signal output terminal indication will differ according to the output device (Y, PB, PR). Please read the operating instructions included with the output device. DVD Player COMPONENT VIDEO AUDIO Notes: • Similar connections are available at the COMPONENT VIDEO INPUT 1-4 Terminals.
Installation The “AV Out” Terminals output the same signals as the main picture on the projection display screen and sound from the speaker at that time, e.g. TV programs or signals from INPUT 1, 2, 3 terminals. Recording Equipment (VHS VCR) Getting Started How to connect the AV OUT Terminals VIDEO AUDIO Stereo System (A Stereo Amplifier and Speakers) AUDIO Notes: • This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR.
Installation How to connect the RGB IN Terminals Connecting a PC to RGB IN COMPUTER Conversion adapter (If necessary) Example: PT-50LC14/PT-60LC14 RGB cable (D-SUB 15P) Connect a cable which matches the audio output terminal on the computer. PC audio cable (M3 stereo mini pin) RGB IN Terminal (D-SUB 15P) Pin Layouts 11 12 13 14 15 6 7 1 8 2 9 10 3 4 Connection port view 5 Pin No. 1 2 3 4 5 6 7 8 Signal name R G B NC NC Ground for R Ground for G Ground for B Pin No.
Installation The table below lists the different types of RGB signals that can be input. If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed correctly, or a black background may be displayed. At this time, “signal” will flash in the on-screen display for about 5 seconds. DTV Format Signals Personal Computer Signals Signal data Mode type No.
Installation How to connect the HDMI Input Terminal About HDMI HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as all existing multi-channel audio formats. One jack supports both video and audio information. The HDMI/HDCP *1 input can be connected to an EIA/CEA 861/861B*2 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI output connection.
Installation 1 2 Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit. • If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal. Press TV/VIDEO on the Remote Control to select HDMI input.
Power ON and OFF Turning the Power ON and OFF Always be sure to follow the procedure given below to turn the projection display power ON and OFF. • The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off. At the same time, the POWER indicator will blink Red. Do not disconnect the power cord from the outlet and do not open the circuit breaker (unless necessary) while the cooling fan is still operating.
Power ON / OFF First Time Setup In order to view TV or Cable programs, it is necessary to perform channel setting. If needed, follow the menus and procedures displayed on-screen for setting up the features. Input Setup To select the configuration of RF input depending on the signal source. POWER SAP VCR DVD DTV RCVR DBS/CBL TV/VIDEO AUX Procedure 1 Press 1, 2 or 3 to select language. 2 Press OK to select Cable or TV.
Basic Menu Navigation POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO Pressing the MENU button displays the MENU screen. 2 Press to select the desired menu. LIGHT AUX A - ANTENNA - B AS PE C T BBE E MENU OK LL CH VOL R A EC MU T 1 VOL CH EXIT 1 2 3 4 5 6 7 8 R-TUNE 0 Note: 3 $ & 6 / 2 / • Depending on the signal being input, some items may or may not be adjustable and some functions may or may not be available. , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Basic Menu Navigation Continued from page 24. Continued from left column. Press to adjust or set desired menu item. to select desired sub-menu items. 3 $ & 6 / 2 / +32 , 8 + ( 2 7 $ Note: For OTHER ADJUST sub-menu Press & ' $ 7 & + 1 7 , 1 8 .
Tuning channels Automatic channel setting Automatically searches and adds receivable channels to memory. Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO 1 Press to select CHANNEL. AUX PE C T BBE , 8 + ( 2 7 $ VOL MENU OK LL CH VOL CH EXIT 1 2 3 4 5 6 7 8 0 2 9 PROG SWAP REW SPLIT PLAY SPLIT CTRL PAUSE STOP REC SPLIT CH DVD/VCR CH 7 , 1 8 .
Tuning channels 4 Case 1 When setup is complete, the lowest channel picture appears. Case 2 If setup is incomplete, the screen at right appears. Check connection of Antenna/Cable to the RF in Terminal, then try Automatic Channel Setting again. NO CH FOUND PLEASE CHECK ANTENNA PRESS OK KEY AGAIN 5 Press to exit menu. Basic Operation CABLE CONNECTION THEN Notes: • After AUTO SET is finished, the lowest channel number added will be received.
Tuning channels Manual channel setting Use this setting when changing setting of receiving channels or changing the channel display. Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO 1 AUX Press to select CHANNEL. 3 $ & 6 / 2 / , 8 + ( 2 7 $ A - ANTENNA - B AS PE C T BBE E VOL MENU OK VOL CH EXIT 1 2 3 4 5 6 7 8 R-TUNE 0 7 , 1 8 .
Tuning channels 4 To add channel 1 2 3 4 5 6 7 8 9 Press to select channel. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 . ( * 85( 2 1(/ 3 5 8$*( *8,'( $'' 0(18 (;,7 0$18$/ 6(7 (17(5 &+$11(/ 0 &+226( $ &+$11(/ 86,1* &+$11(/ 83 '2:1 Basic Operation Press to add channels to memory. To delete channel Press to select channel. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Projection display operation Operation can be done from the projection display. POWER button/ POWER indicator Volume up(+) / down(–) buttons Channel up / down buttons Remote Control Sensor TV/VIDEO button POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO AUX PE C T BBE VOL MENU 1 OK VOL CH EXIT 2 3 4 5 7 8 R-TUNE LL CH 0 2 Press to turn the projection display on. R A EC MU T AS Press to operate the projection display with the Remote Control.
Projection display operation TV status display Press the RECALL button, except when the MENU screen is displayed, to display current TV status information. Channel Channel caption (P. 53) Aspect types (P. 32) Receivable broadcast types (P. 37) Using the Number keys 2 3 4 5 6 7 8 9 0 When selecting CABLE channels 100 to 125 with the Number keys, first press the 1 key, and then enter the remaining two digits. Example 1: To select channel 125, first press the 1 key, then 2, then 5.
ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. The aspect mode changes each time the ASPECT button is pressed. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO ZOOM NORMAL FULL AUX A - ANTENNA - B AS PE C T BBE E MENU OK R LL CH VOL )8// A EC MU T JUST LIGHT VOL CH EXIT • When a 480p signal is being received, the mode switches between NORMAL, ZOOM, and FULL only.
ASPECT Controls Mode Picture Explanation 1250$/ NORMAL JUST JUST mode will display a 4:3 picture at maximum size but with aspect correction applied to the center of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal. =220 ZOOM ZOOM mode magnifies the central section of the picture. FULL will display the picture at its maximum size but with sight elongation.
Searching for the desired channel (Channel search) Channel search displays each channel, in order, as a paused image. Channels are displayed from the left top to the right bottom in order. When it reaches the right bottom, the next channel is displayed at the left top, overwriting the previously displayed channel. When the SEARCH/OPEN/CLOSE button is pressed during single screen.
Playing peripheral equipment Confirming connections VCR A video camera uses the Input 3 terminal on the front of the projection display. Example: Connect Input 3 To S-video output or video output Video camera DVD player To audio output Turning the power on and switching input modes POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO PE C T BBE MENU OK 2 The input mode changes each time this button is pressed.
Mute / Freeze / SAP Sound mute POWER Useful when answering the phone or receiving unexpected visitors SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. AUX A - ANTENNA - B AS PE C T BBE E MENU OK LL CH VOL R A EC MU T LIGHT VOL CH 087( EXIT Note: • The audio output from AV OUT is not muted.
Mute / Freeze / SAP Receivable Broadcast Types The following are possible broadcast types with their accompanying on-screen displays. The signal being received is indicated with a “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, follow the “Select Audio Mode for TV Viewing” section (below.
Split screen Splitting the screen POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO Press to split. (The previously selected screen appears on the left.) LIGHT AUX A - ANTENNA - B &+ BBE E MENU OK R Left screen (Main picture) VOL CH EXIT 1 2 3 4 5 6 7 8 R-TUNE &+ LL CH VOL 38 CT A EC MU T PE AS 0 Right screen (Sub picture) Returning to one screen Press to return.
Split screen Changing the channel of the right screen Swapping left and right screens Press to select the desired channel. Press to swap. Example: During SPLIT SCREEN NORMAL Example: During SPLIT SCREEN NORMAL SPLIT CH ▲, ▼ buttons can also be used to select an outside input for the right side of the screen. CABLE TV or 69 125 CH 01 &+ Basic Operation &+ &+ Note: • Picture quality may change according to the combination of signals input to the left and right screens.
Adjusting screen position and size POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO AUX 2 Press to select the screen mode. Press the MENU button to display the MENU screen. Press to select OTHER. A - ANTENNA - B A CT SPE BBE E MENU OK , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Adjusting screen position and size Adjustment Button item Adjustment Details Note Press ► button. The image moves to the right. PC input H Position Press ◄ button. The image moves to the left. Press ► button. The image moves up. V Position PC input Press ◄ button. The image moves down. If noise appears on the ends of the image in SHRINK, switch to ENLARGE. H WIDTH Press OK button. Only JUST mode (SHRINK) If noise appears on the ends of the image in WIDEN, switch to NARROW.
Audio Adjustments Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO AS 3 $ & 6 / 2 / , 8 + ( 2 7 $ AUX PE C T BBE MENU OK LL CH VOL R A EC MU T Press to select AUDIO. A - ANTENNA - B E CH 3 4 5 6 7 8 R-TUNE 2 Press to select each item. Note: EXIT 2 0 SPLIT PLAY & ' $ 7 & + 1 7 , 1 8 . ( * 85( 2 1(/ 3 0 % 7 % 1 2 2 $ 5 $ 2 7 ' 6 ( / 5 + & ' $ 7 & + 1 7 , 1 8 .
Audio Adjustments OTHER ADJUST While in the AUDIO menu screen, select OTHER ADJSUT and press the OK button to display the OTHER ADJUST sub-menu. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 . ( * 85( 2 1(/ 3 *8,'( 5 8$*( 0(18 (;,7 6 6 % $ 3 8 % 8 ( 5 ( ' $ 5 , . 2 2 6(/(&7 6(7 ( 8 5 1 6 ' ( / ( & 7 $ 2 2 8 2 ) ) 7 1 ) ) 2 BBE: Natural sound is offered. (See below.
Picture Adjustments Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO 1 Press to select PICTURE. 3 $ & 6 / 2 / , 8 + ( 2 7 $ AUX A - ANTENNA - B AS PE C T BBE E VOL MENU OK 2 VOL CH Press to select each item. Note: EXIT • NORMAL is displayed at default. 1 2 3 4 5 6 7 8 R-TUNE 7 , 1 8 . ( * 85( 2 1(/ 3 *8,'( 5 8$*( 0(18 (1' 3 & 7 % 3 6 1 2 , 2 , 5 , + 2 7 & / 1 , & $ 5 + & ' $ 7 & + 1 7 , 1 8 .
Picture Adjustments 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 . ( * 85( 2 1(/ 3 3 & 7 % 3 6 1 2 , 2 , 5 , + 2 7 & / 1 , & $ 5 + *8,'( 6(/(&7 6(7 5 8$*( 0 2 7 * 7 5 0 ( 2 5 + 8 3 $ 5 ' 7 5 1 / 0(18 (;,7 ( 1 ( ( ( 6 6 6 6 9 , 9 , ' $'-867 COLOR TINT BRIGHTNESS PICTURE SHARPNESS Adjust to desired level while viewing picture through the menu overlay.
Lock Feature This projection display has a built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES and US TV PROGRAMS ratings. Enter Secret Code POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO LIGHT AUX A - ANTENNA - B A 4-digit code must be entered to view a blocked program or change rating settings. Press the MENU button to display the MENU screen. 1 Press to select LOCK. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Lock Feature Setup US MOVIES Ratings Perform “Enter Secret Code” step 1 on page 46. 1 1 2 3 4 5 6 7 8 9 Press Number keys to enter your secret code. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 0 7 , 1 8 . ( * 85( 2 1(/ 3 *8,'( 5 8$*( 0(18 (;,7 /2&. (17(5 ',*,7 &2'( + (17(5 Press to set. 2 Press to select US MOVIES. ON: V-Chip Control is activated. OFF: V-Chip Control is deactivated. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Lock Feature Setup US TV PROGRAMS Ratings POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO PE C T BBE AUX Press to select US TV PROGRAMS. 3 $ & 6 / 2 / , 8 + ( 2 7 $ MENU OK EXIT 1 2 3 4 5 6 7 8 9 R-TUNE 0 SPLIT PLAY 2 PROG SPLIT CTRL FF PAUSE STOP REC FREEZE TV/VCR SPLIT CH DVD/VCR CH SEARCH OPEN/CLOSE 7 , 1 8 . ( * 85( 2 1(/ 3 *8,'( 5 8$*( 0(18 (;,7 8 8 6 & 6 & + + & ' $ 7 & + 1 7 , 1 8 .
Lock Feature US MOVIES RATINGS: GENERAL AUDIENCE: All ages admitted. PARENTAL GUIDANCE SUGGESTED: PG Some materials may not be suitable for children. PARENTS CAUTIONED: PG-13 Some materials may be inappropriate for children under 13. RESTRICTED R Children under 17 must be accompanied by a parent or adult. OVER AGE 17 ONLY: NC-17 No one 17 and under admitted.
Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. CAPTION MODE POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO AUX 1 Press to select SETUP.
Closed Captions CC ON MUTE Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To deactivate, press the MUTE button again. Note: • This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be broadcast with Closed Caption. Press the MENU button to display the MENU screen. 1 Press to select SETUP. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Input Label To label video input connections for on-screen display. Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO PE C T BBE VOL MENU OK R LL CH 2 5 7 8 R-TUNE & ' $ 7 & + 1 7 , 1 8 . ( * 85( 2 1(/ 3 *8,'( 5 8$*( 0(18 (1' & , / & & 1 2 $ & 3 2 Press to select INPUT LABEL. 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Channel Caption Feature Station names, e.g. ABC, TNN, etc. so that they will appear when a channel is selected. Choose 24 preset names. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO Press to select CHANNEL.
Weak Signal Display Feature When “ON” is selected, the picture is displayed even when a broadcast signal is weak or non-existent. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO 1 Press to select CHANNEL.
Color Temp Feature To increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
RGB Level Feature (RGB input only) If the picture has a reddish or blueish tint, or if the whiteness is not at the desired level, you can adjust the white balance. (The following steps show R Level adjustment.) Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO AUX PE C T BBE VOL MENU OK LL CH VOL CH 3 $ & 6 / 2 / , 8 + ( 2 7 $ 2 Press to select OTHER ADJUST. 3 $ & 6 / 2 / , 8 + ( 2 7 $ EXIT Press to display the OTHER ADJUST screen.
Video NR (Noise Reduction) Feature In the event of weak signal conditions, the Video NR circuitry reduces noise in the luminance channel. It is important to note that Video NR should remain OFF for maximum picture detail when receiving a strong signal or viewing high-quality video. Press the MENU button to display the MENU screen.
Automatically changing screen size If the received signal contains screen size specifications in RF, VIDEO INPUT (1–3) or COMPONENT VIDEO INPUT (1–4), the screen size is automatically changed. Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO Press to select PICTURE. LIGHT 3 $ & 6 / 2 / , 8 + ( 2 7 $ AUX A - ANTENNA - B AS PE C T BBE E VOL MENU OK LL CH VOL CH 2 3 4 5 6 7 8 R-TUNE 0 2 Press to select OTHER ADJUST.
Setting when 480p signals are input through COMPONENT VIDEO INPUT Adjust 480p signals to achieve a natural color from digital equipment connected to COMPONENT VIDEO INPUT (Y, PB, PR input terminals). Press the MENU button to display the MENU screen. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
RGB Input Feature Set the signal to be input to the projection display’s RGB IN terminal. Most of analog RGB IN signals are selected automatically. When RGB input signal is VGA 60Hz from PC or 480P from other equipment, you must manually switch to the desired input. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
3D Y/C Feature Accurate separation of the picture’s brightness and color signals allows you to enjoy a beautiful picture. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
3D IP Feature Film media (taken at 24 frames per second) is faithfully reproduced on the projection display. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO Press to select PICTURE. LIGHT 3 $ & 6 / 2 / , 8 + ( 2 7 $ AUX A - ANTENNA - B AS PE C T BBE E VOL MENU OK LL CH Press to select OTHER ADJUST.
GAMMA Adjust Feature The median brightness level of the picture can be set. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
Black Extension Feature You can adjust the gray level of black for areas of the screen that are darker than the median level. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
Color Correct Feature With HDMI connection, depending on the signal, the picture may be displayed with unnatural colors (as if red and blue are reversed). Correct by setting the COLOR CORR. to Invert. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO LIGHT Press to select PICTURE.
Sleep Timer Feature The projection display can be set to shut itself off at a preselected time. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO 1 AUX Press to select OTHER. 3 $ & 6 / 2 / , 8 + ( 2 7 $ PE C T BBE VOL MENU OK VOL CH 2 2 3 4 5 6 7 8 0 *8,'( 5 8$*( 0(18 (1' 6(/(&7 6(7 EXIT 1 R-TUNE 85( 2 1(/ 3 Press to display the OTHER screen. LL CH 7 , 1 8 .
Switching languages for display The language of the projection display is set to English as the factory setting. To select one of 3 different languages for on-screen displays, follow the instructions below. Press the MENU button to display the MENU screen. POWER SAP TV VCR DTV DVD RCVR DBS/CBL TV/VIDEO Press to select LANGUAGE. LIGHT 3 $ & 6 / 2 / , 8 + ( 2 7 $ & ' $ 7 & + 1 7 , 1 8 .
Photo Viewer (SD Card/PC Card) Still image data (JPEG) made with a digital camera, digital video camera, or PC can be played back using an SD Card/PC Card. WARNING As with any small object, SD cards can be swallowed by young children. Do not allow children to handle the SD card. Displayable Image Formats: Baseline JPEG (80 x 60 ~ 5 120 x 3 840 pixels) Notes: • Some parts of an image may not be displayed or the image may be displayed on a smaller scale depending on the size of the image.
Photo Viewer (SD Card/PC Card) Compatible Card Insert the Card. SD Card slot SD Card MultiMediaCard Front Card Slot (P. 10) PC Card slot Compact Flash* Smart Media* Memory Stick* xD Picture Card* • The media* listed in the right column above can be read via the PC Card in the PC Card adaptor. • Hard disk PC Cards, Flash ATA Cards, and other recorded media cannot be used. • Place the selected media onto the PC Card and then insert into the PC Card Slot.
Photo Viewer (SD Card/PC Card) MENU Area Operation POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO Press to select MENU. LIGHT PE C T BBE Press to move to index area. VOL OK LL CH VOL CH EXIT 1 2 3 4 5 6 7 8 9 MENU R-TUNE 0 6' 3& SINGLE A single image selected from the index area fills the screen. You can also rotate the image and view image information. (PP. 71-72) SLIDE Images are displayed one after another as a slide show. Also, the SPEED and Transition features (p.
Photo Viewer (SD Card/PC Card) Single Play Mode 1 0(18 3$*( 6,1*/( 6/,'( Press ▲▼ to select “SINGLE,” and press OK. Press ▲▼◄► to move cursor to desired file in INDEX AREA. (Press ▲▼◄► to display next/previous page of 9 thumbnail files), Press OK to display file in full screen size.
Photo Viewer (SD Card/PC Card) Continued from page 71. Slide Show Mode ZOOM SETTING ▲▼ to select “SLIDE,” and press OK. 1 Press Press ▲▼◄► to move cursor to desired file in A Single View Screen can be changed from Normal Screen Mode to Zoom Screen Mode by pressing ASPECT. The picture will fill the entire screen. To return to normal screen, press ASPECT again. Index Area. (Press ▲▼◄► to display next/previous page of 9 thumbnail files). Press OK to display SLIDE MENU.
Replacing the lamp unit The lamp unit is sold separately. To purchase a replacement, call the Panasonic accessory department, toll free at: 1-800-332-5368. Lamp unit Part No. : TY-LA1000 Lamp unit replacement period The Lamp is a consumable item and it’s life varies based on individual usage. Panasonic warranties the original Lamp for a period of 1 year from the date of purchase. THE LAMP NEEDS TO BE REPLACED, AND THE LAMP HOUR METER NEEDS TO BE RESET.
Warning Indicators This unit has indicators (lights on the front) to let you know the unit’s internal condition. (See page 10) Depending on the condition, the Lamp, Power, or Temp indicator will flash to alert you. In this case, turn unit off and follow the measures below. Indicator Temp Indicator Lamp Indicator Problem Possible Solution Flashes red 1 or 3 times every Power shuts off. 5 seconds. Symptom Malfunction Contact a service center. Flashes red 2 or 4 times every Power shuts off. 5 seconds.
Remote Control Quick Reference Guide (Operating peripheral equipment) Programming The Remote The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, DTV, RCVR, DBS, CBL or AUX. Follow the procedures for programming your Remote Control with or without a code for the component. POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO 1 Confirm that the external component is plugged and operating. Turn the component off.
Remote Control Quick Reference Guide (Operating peripheral equipment) Programming Without A Code This procedure searches all codes and is called the “sequence method.” POWER SAP TV VCR DVD DTV RCVR DBS/CBL TV/VIDEO 1 Confirm that the external component is plugged in and on. Turn the component off. AUX A - ANTENNA - B AS PE C T BBE E MENU OK LL CH VOL + R VOL CH EXIT 1 2 3 4 5 6 7 8 9 R-TUNE Press OK and POWER together, for at least 5 seconds.
Remote Control Quick Reference Guide (Operating peripheral equipment) Infrared Codes Index The Remote Control is capable of operating many brands of peripheral equipment. Refer to page 75 and 76 for programming procedures. Notes: • The Remote Control memory is limited and therefore some models may not operate. The Remote Control is not designed to control all features available in all models. • After entering the proper infrared code, press the desired Mode Selection button on the Remote Control.
Remote Control Quick Reference Guide (Operating peripheral equipment) CABLE CONVERTER BOX AND DVD, CD PLAYERS Infrared Codes Index DBS/CBL RCVR 78 Codes For DBS Brand Code Codes For DBS (Contd.) Brand Code Dish Network (Echostar) Echostar Express VU G. E. G.I.
Remote Control Quick Reference Guide (Operating peripheral equipment) CASSETTE PLAYERS, PERSONAL VIDEO RECORDERS, RECEIVERS, AMPLIFIERS, and DBS Infrared Codes Index AUX Codes For Cassette Decks Brand Code Codes For Cassette Decks (Contd.
Remote Control Quick Reference Guide (Operating peripheral equipment) Operating Components with Remote Control Note: • Refer to pages 8-9 for programming Remote Control procedure. Operating a DBS Program the Remote Control to use with DBS. Operating a VCR Program the Remote Control to use with VCR. TO DO THIS... PRESS TO DO THIS...
Remote Control Quick Reference Guide (Operating peripheral equipment) Operating Components with Remote Control Operating a Cassette Deck To operate a cassette deck, the Remote Control must be in AUX mode and be programmed with the appropriate code for your equipment. TO DO THIS... PRESS Operating a Receiver Program the remote to operate audio receiver. TO DO THIS...
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Power does not turn ON. No picture even if the power is turned ON. LAMP indicator blinks red. The POWER indicator flashes orange twice every 5 seconds. The TEMP indicator flashes 2 or 4 times every 5 seconds. The power turns OFF. The TEMP indicator flashes 5 times every 5 seconds. Power turns off while another indicator is flashing. Remote control does not function. Image shakes.
Specifications PT-43LC14 PT-50LC14 PT-60LC14 Power Source AC 120 V, 60 Hz Power Consumption Power ON: Power OFF: LCD panels 0.7″ Poly silicon TFT LCD panel x 3 921 600 (1 280 x 720) stripe pixels x 3 panels (16:9) 0.
Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with a soft cloth from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth. DO NOT bring into contact with insecticide or other volatile substances.
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., Ave. 65 de Infantería, Km. 9.
Note 86 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.
Index 1 080 i...............................................................16, 19, 21 480 i........................................................................16, 19 480 p ................................................................16, 19, 21 720 p ................................................................16, 19, 21 A ASPECT button ........................................................9, 32 Auto shut off .................................................................31 AV out terminals .
Customer’ Record The serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
