SAP POWER TV/VIDE O T LIG E HT M A SPEC UT DVD AUX DTV CBL RC VR R DB S CH CTIO N A TV VC VOL BBE MENU EXIT VOL CH RECALL PAGE 1 2 4 5 7 8 GUIDE 3 6 9 R-TUNE PROG 0 PIP MIN REW PLAY PIP MAX FF PAUSE STOP REC FREEZE TV/VCR PIP PIP CH VCR CH SPLIT MOVE SEARCH OPEN/CLOSE SWAP Projection Television Operating Instructions PT-52DL52 Model No.
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and record the model number and serial number of your set in the space provided on the back cover of these instructions. Visit our Panasonic Web Site for USA : www.panasonic.
Table of Contents Important Safety Instructions ....................................... 3 Table of Contents ........................................................... 5 Installation ...................................................................... 6 Receiver Location ........................................................ 6 Optional External Equipment ....................................... 6 AC Power Supply Cord ................................................ 6 Safety Precaution ...................
Installation Receiver Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Installation Helpful Hints: Helpful Hints: For frequent remote control users, replace old batteries with alkaline batteries for longer life. Whenever you remove the batteries, you may need to reset the remote control infrared codes. We recommend that you record the code on page 60, prior to setting up the remote control. Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Observe the following precautions: 1.
Installation Connecting the Aerial cable to the RF In Terminal Antenna Connection - For proper reception of VHF / UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV (See page 22).
Installation Antenna Connection (Cable Box, no VCR) Use this configuration when connecting the projection TV to a cable TV system using a Cable Box. ANTENNA TERMINALS ON THE BACK OF THE PROJECTION TV ANT1 CABLE BOX SPLIT ANT2 OUT TERMINAL ON THE BACK OF THE CABLE BOX ANT OUTPUT ANT INPUT Connect the cable from the antenna or cable system to the ANT1 terminal on the back of the projection TV.
Installation How to connect the “1, 2, 3, 4” Input Terminals Connect VCR and other peripheral equipment (VHS VCR or Super-VHS VCR) Audio R OUT L Video OUT S Video OUT DIGITAL IN S VIDEO VIDEO VIDEO L L AUDIO AUDIO R R AUDIO PROG OUT 1 2 3 INPUT Notes: (1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals. Input 4 is located on the front of the unit. Select the desired VIDEO input position by pushing the TV/VIDEO button.
Installation How to connect the COMPONENT VIDEO Input Terminals (DVD Player) R Audio OUT L DVD(Y-PB-PR) OUT PR PB Y Y VIDEO PB PR L AUDIO R 1 2 COMPONENT VIDEO INPUT Note: Similar connections are available at the COMPONENT VIDEO Input 1, 2 Terminals. How to connect the DIGITAL IN Terminals 1. Connecting a DTV Decoder to DIGITAL IN When connecting a DTV decoder to DIGITAL-IN, be sure not to select “SKIP” or “PC” from the INPUT LABEL menu.
Installation 2. Connecting a PC to DIGITAL IN When connecting a PC to DIGITAL-IN, be sure to select “PC” from the INPUT LABEL menu. Failing to do so may result in a distorted display or black out (refer to page 36). DIGITAL IN terminals PC with digital RGB video out DIGITAL IN DIGITAL IN cable (Supplied) K1HA24DA0005 (2 m) S VIDEO VIDEO Connect a cable that matches the audio output terminal on the computer.
Installation How to connect the PC Input Terminals COMPUTER INPUT 4 PC INPUT VIDEO Conversion adapter (if necessary) L-AUDIO-R D-SUB 15P RGB PC cable (supplied) K1HA30DA0003 (2 m) Audio 2 × RCA plug Connect a cable that matches the audio output terminal on the computer. Signal Names for D-SUB 15P Connector 5 10 9 4 3 8 2 7 1 6 15 14 13 12 11 Pin Layout for PC Input Terminal Pin No. 1 2 3 4 5 Signal Name R G B GND (Ground) GND (Ground) Pin No. Signal Name Pin No.
Location of Controls Illuminated Remote Control Power button Press to turn the TV ON or OFF (See page 18, 19). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). ASPECT button Change of screen size (See page 44). JUST ZOOM1 4:3 ZOOM2 FULL MUTE button Press this button to mute the sound, press again to cancel the mute. Mode Selection buttons Selects the operation mode for the remote control.
Location of Controls TV/VIDEO button The input mode changes each time this button is pressed. [Example] TV COMPONENT 1 COMPONENT 2 PC DIGITAL-IN VIDEO 4 VIDEO 1 VIDEO 3 VIDEO 2 SAP button Selects Audio mode (See page 37). STEREO TV/VIDEO LIG H E UT T DVD AUX DTV CBL RC R VC VR Changes to the next channel up Moves cursor upward during menu mode. DB VOL EXIT VOL VOL CH RECALL PAGE GUIDE 1 2 3 4 5 6 7 8 9 R-TUNE PROG Displays menu Press to access DTV, DBS or DVD menus.
Location of Controls Controls and Terminals on the Projection TV FRONT LAMP This indicator lights up when there is a malfunction with the lamp unit (see page 7, 65) TEMP This indicator lights up when there is an abnormal temperature in the unit (see page 65) POWER INDICATOR G-POWER ON (see page 18, 19) POWER SWITCH (see page 18) POWER G-POWER ON LAMP TEMP Remote Control Sensor (see page 18) Volume up(+) / down(–) buttons (see page 15, 17) Input mode selection buttons (see page 15) Channel up / down b
Cable TV / VHF, UHF and CATV ANTENNA TERMINAL ON THE BACK OF THE PROJECTION TV SAP POWER TV/VIDEO To Antenna Input LIG H T M T ASPEC E UT AUX DVD R VC RC CBL DTV TV DB S CH CTIO OUTPUT N A Incoming Cable from Antenna or Cable TV System. VR INPUT TM DLP HDTV COMPATIBLE 1080 i / 720p A TEXAS INSTRUMENTS TECHNOLOGY VOL VOL CABLE BOX POWER G-POWER ON LAMP TEMP ACTION TV/VIDEO Power switch Remote control sensor Cable TV Operation can be done from the TV set.
Power ON / OFF Connecting the Plug to the Wall Outlet The projection TV must first be switched on at the wall outlet. The projection TV will then be in standby mode. TM DLP HDTV COMPATIBLE 1080 i / 720p A TEXAS INSTRUMENTS TECHNOLOGY Turning the Power ON and OFF Always be sure to follow the procedure given below to turn the projection TV power ON and OFF. The lamp cooling fan will continue to operate for approximately 90 seconds after the power is turned off by the remote control.
Power ON / OFF Power (ON/Off) button POWER SAP Push the Power button to turn the projection TV ON, from Stand-by mode. POWER TV/VIDEO The Power Indicator will blink Green. LIG H T M T ASPEC E UT AUX DTV CBL Approximately 10 seconds RC R VR The Power Indicator will become Green. DB TV VC DVD CH CTIO VOL BBE MENU Push the Power button to turn the projection TV to Stand-by mode. N A S VOL The Power Indicator will become Orange.
Roller Guide Menu Navigation Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT SET UP Press to rotate to desired icon. Press to display the main menu and submenu field. CH CTIO N A 2 VOL VOL SET UP ENGLISH MODE IDIOMA / LANGUE PROG CHAN CH CC OTHER ADJ. SET UP IDIOMA / LANGUE Press to select main menu feature. PROG CHAN ON MUTE MODE CC CC CC OTHER ADJ. Main menu field Submenu field CH CTIO N A 3 NO OFF VOL SET UP VOL Press to enter submenu field.
Roller Guide Menu Navigation SET UP SET UP ENGLISH MODE IDIOMA / LANGUE IDIOMA / LANGUE PROG CHAN PROG CHAN CC CC OTHER ADJ. SET UP OTHER ADJ. SET UP SET UP IDIOMA / LANGUE PROG CHAN IDIOMA / LANGUE CC CC CC OTHER ADJ. VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ.
SET UP Operation SET UP Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT SET UP Press to rotate to SET UP. Press to display SET UP. CH CTIO SET UP N A 2 VOL VOL MODE IDIOMA / LANGUE CH ENGLISH PROG CHAN CC Press to select the main menu. OTHER ADJ. Proceed to each adjustment item of the selected main menu. 3 To end Adjustment: EXIT N A Press twice to return to the roller guide. CH CTIO VOL SET UP VOL CH Press to exit roller guide.
SET UP Operation MODE Selection To select either CABLE or TV. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE PROG CHAN 2 CH CTIO CC OTHER ADJ. Press to select CABLE or TV. N A Press to select MODE. CABLE MODE ANT1 ANTENNA AUTO PROGRAM MANUAL PROGRAM VOL VOL CABLE TV CH ANTENNA Selection To select either ANT1 or ANT2. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field.
SET UP Operation AUTO PROGRAM To automatically program all channels with a signal. In SET UP menu press to select PROG CHAN. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE Press to select AUTO PROGRAM. 2 PROG CHAN OTHER ADJ. N A CC CH CTIO VOL VOL CABLE MODE ANT1 ANTENNA AUTO PROGRAM MANUAL PROGRAM Press to start AUTO PROGRAM. CH MANUAL PROGRAM To manually add or delete channels. In SET UP menu press to select PROG CHAN.
SET UP Operation AUTO POWER Select SET to power up the TV at the same time as the cable box or other components or select OFF. In SET UP menu press to select OTHER ADJ. CH CTIO N A 1 VOL VOL Press to enter submenu field. SET UP CH IDIOMA / LANGUE PROG CHAN Press to select AUTO POWER. 2 CC CH CTIO Press to select SET or OFF. CHAN BANNER OFF OFF AUTO POWER ON CHAN BANNER OFF OFF AUTO POWER ON N A OTHER ADJ.
Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. The program being viewed must be broadcast with Closed Caption. Press to display the roller guide menu. CH CTIO N A 1 VOL VOL EXIT CH SET UP Press to rotate to SET UP.
Closed Captions cc MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. CH CTIO Press to select from the following: N A In the submenu field press to select cc MODE. VOL SET UP VOL OFF C1 C2 T1 IDIOMA / LANGUE T2 CH T4 T3 C4 PROG CHAN C3 CC CC CC OTHER ADJ. ON MUTE MODE NO OFF • CAPTION OFF - Recommended mode when Closed Caption is not being used.
PICTURE Adjustment 1 Press to display the roller guide menu. A N CH CTIO VOL SET UP VOL CH EXIT Press to rotate to PICTURE. 2 Press to display PICTURE menu. A N CH CTIO VOL VOL VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ. CH Press to select the main menu. VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ. PIC MODE STANDARD COLOR TINT BRIGHTNESS PICTURE SHARPNESS NO NORMAL Proceed to each adjustment item of the selected main menu.
PICTURE Adjustment COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL In PICTURE menu press to select VIDEO ADJ. 1 CH CTIO A N VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ. VOL VOL Press to enter submenu field. CH In VIDEO ADJ. submenu field press to select each submenu (COLOR / TINT / BRIGHTNESS / PICTURE / SHARPNESS / NORMAL).
PICTURE Adjustment COLOR MATRIX In OTHER ADJ submenu field press to select COLOR MATRIX. Press to select SD or HD. CH CTIO N A Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEO INPUT (Y, Pb/Cb ,Pr/Cr input terminals) and DIGITAL-IN. Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition). VOL VOL VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ.
PICTURE Adjustment POS ADJ. POS ADJ. is valid durring ZOOM mode (ZOOM1, ZOOM2), PC input mode and PC setting in DIGITAL-IN input mode. In PICTURE menu press to select POS ADJ. CH CTIO N A 1 VOL VOL Press to enter submenu field. CH VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ. V-POSITION H-POSITION 0 0 V-POSITION H-POSITION 0 0 In POS ADJ. submenu field press to select V-POSITION or H-POSITION. CH CTIO N A 2 VOL VOL CH During Zoom mode: Press to adjust the position.
PICTURE Adjustment CLOCK PHASE / DOT CLOCK CLOCK PHASE and DOT CLOCK are valid only during PC input mode. When an RGB signal is projected, minor adjustments of the DOT CLOCK frequency and adjustments of the phase can be made. In PICTURE menu press to select PC ADJ. CH CTIO N A 1 VOL VOL Press to enter submenu field. CH VIDEO ADJ. OTHER ADJ. POS ADJ. PC ADJ. CLOCK PHASE DOT CLOCK SIZE 16 0 2 CLOCK PHASE DOT CLOCK SIZE 16 0 2 In PC ADJ. submenu field press to select CLOCK PHASE or DOT CLOCK.
CHANNEL SCAN CHANNEL SCAN Lets you select the channel scanning mode either FAV or ALL. CHANNEL SCAN FAV CHANNEL SCAN ALL Press to display the roller guide menu. CH CTIO N A 1 To enter up to 16 favorite channels. To scan all channels when using the CH up/down buttons. VOL VOL CH EXIT Press to rotate to CHANNELS. Press to display CHANNELS. CH CTIO N A 2 LOCK VOL VOL FAVORITES CAPTION CH Press to select FAVORITES.
CHANNEL SCAN FAVORITE CHANNELS Selection 1 FAVORITES CAPTION CH CTIO N A Under CHANNEL SCAN FAV press to select ENTER CHANNEL. VOL VOL CH 2 1 2 3 4 5 6 7 8 9 Use remote numeric keypad to select desired channel. FAVORITES CAPTION 0 CHANNEL SCAN FAV 15 ENTER CHANNEL FAVORITE CHANNELS 2 5 8 10 15 18 25 FAV CHANNEL SCAN ENTER CHANNEL 15 FAVORITE CHANNELS 2 5 8 10 18 25 TO ADD TO DELETE (Example: Channel 15 is selected) Press channel.
CAPTION Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH Press to rotate to CHANNELS. Press to display CHANNELS. CH CTIO LOCK N A 2 EXIT VOL VOL CH FAVORITES CAPTION Press to select CAPTION. CH CTIO N A 3 PRESET CAPTION MANUAL CAPTION INPUT LABEL VOL VOL Press to enter submenu field. CH Press to select PRESET CAPTION / MANUAL CAPTION / INPUT LABEL. Proceed to each adjustment menu. PRESET CAPTION Under PRESET CAPTION press to display next menu.
CAPTION 3 MANUAL CAPTION CH CTIO ENTER CHANNEL N A Press to select ENTER CAPTION. VOL VOL ENTER CAPTION 3 ____ TO MOVE CURSOR CH TO SELECT CHARACTER Press to select characters. 4 MANUAL CAPTION A N CH CTIO VOL VOL ENTER CHANNEL 3 ENTER CAPTION : / 5A TO MOVE CURSOR CH TO SELECT CHARACTER Press to move cursor. Repeat Step 4 up to 4 characters. Note: In MANUAL CAPTION up to 4 characters can be selected as a CAPTION.
Audio Adjustment Press to display the roller guide menu. CH CTIO N A 1 VOL TIMER VOL CH EXIT Press to rotate to AUDIO. Press to display AUDIO menu. CH CTIO N A 2 SET UP VOL VOL CH Press to select the main menu. AUDIO ADJ. OTHER ADJ. SPEAKERS SURROUND AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS MODE STEREO SAP MONO BASS TREBLE BALANCE NO NORMAL Proceed to each adjustment item of the selected main menu. Selecting STEREO/SAP/MONO In AUDIO menu press to select AUDIO ADJ.
Audio Adjustment Selecting BASS / TREBLE / BALANCE / NORMAL In AUDIO menu press to select AUDIO ADJ. CH CTIO MODE N A 1 VOL VOL Press to enter submenu field. CH AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS MONO BASS TREBLE BALANCE NORMAL NO Press to select BASS / TREBLE / BALANCE / NORMAL. CH CTIO Press to adjust the desired level by listening to the sound. N A 2 VOL VOL CH Item BASS TREBLE BALANCE NORMAL Effect Less More Less More Left SP. Right SP.
Audio Adjustment SURROUND To enjoy a concert hall effect, turn the SURROUND mode ON. 1 CH CTIO N A In AUDIO menu press to select SURROUND. VOL Press to enter submenu field (MODE). VOL CH AUDIO ADJ. OTHER ADJ. SURROUND SPEAKERS MODE ON Press to select ON or OFF. CH CTIO ON OFF N A 2 VOL VOL CH Notes: During stereo sound or soft playing : SURROUND During normal sound : SURROUND set to ON. set to OFF. SPEAKERS In AUDIO menu under SPEAKERS, select the desired SPEAKER mode.
Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. During PC and DIGITAL-IN input mode Picture in Picture Operation is not available. Basic PIP Operation PIP 1 Press the PIP button on the remote control to display the PIP Frame on screen. SAP POWER TV/VIDEO LIG H Note: Audio is from Main Picture only.
Picture in Picture Operation PIP MIN, PIP MAX PIP MIN REW PIP MAX FF These features are used to size the PIP Frame. Press PIP MIN REW or PIP MAX FF MAX to size the PIP Frame. Minimum Freeze FREEZE TV/VCR Main Picture During PIP operation this feature is used to stop action in the PIP frame. FREEZE 1 Press TV/VCR to stop PIP frame action. 2 Press TV/VCR again to continue action. FREEZE Note: To stop action for Main picture: 1 In PICTURE MENU OTHER ADJ., select FREEZE PIP or SPLIT (see p.
Split Screen This feature lets you watch two different channels side by side with or without an external video source. The audio is from the Main picture only (left side). Split screen enables you to search other channels on the right screen or check video recording status. During PC and DIGITAL-IN input mode, Split Screen is not available. Splitting the screen 1 SAP POWER TV/VIDEO to display Split screen.
Split Screen Changing the channels for the Split Screen PIP CH VCR CH Select channels for the Split Screen by PIP CH VCR CH pressing Searching the other channels SEARCH OPEN/CLOSE Press SEARCH OPEN/CLOSE to search the other channels. . CH10 CH10 CH10 Search Frames Press SEARCH OPEN/CLOSE again to stop the search. This returns the screen to its previous condition.
ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed. SAP POWER JUST TV/VIDEO 4:3 ZOOM1 ZOOM2 FULL LIG H T M T ASPEC E UT AUX DVD Note: ASPECT MODE will change as follows depending on the receiving signals.
TIMER The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if necessary. Then set TIMER1 and TIMER2. Press to display the roller guide menu. CH CTIO N A 1 VOL LOCK VOL CH EXIT TIMER Press to rotate to TIMER. Press to display TIMER. CH CTIO N A 2 VOL VOL TIMER CH Press to select the main menu.
TIMER SLEEP SLEEP sets the sleep time. In TIMER menu press to select SLEEP. CH CTIO TIMER N A 1 VOL VOL CLOCK SET SLEEP TIMER1 TIMER2 Press to enter submenu field. CH 2 HOW LONG ? 30 A N CH CTIO VOL VOL CH Press to select the desired sleep time. To turn off the timer select NO. NO 30 60 90 Timer1 and Timer2 In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on selected days.
TIMER OFF TIME 1 CH CTIO A TIMER CLOCK SET SLEEP TIMER1 TIMER2 Press to set hours AM or PM. N VOL Set the time of day. Press to select OFF TIME. VOL DAILY DAY ON TIME 12 : 00 PM OFF TIME 13 : 00 PM ENTER CHANNEL 5 SET YES CH Press to move to minutes position. CH CTIO VOL TIMER CLOCK SET SLEEP TIMER1 TIMER2 Press to set minutes. N A 2 VOL CH DAILY DAY 12 : 00 PM ON TIME OFF TIME 13 : 00 PM ENTER CHANNEL 5 SET YES ENTER CHANNEL Press to select ENTER CHANNEL.
LOCK Feature Select LOCK SET to prevent video games and VCR tapes from being viewed. Press to display the roller guide menu. CH CTIO N A 1 VOL EXIT VOL LOCK TIMER CH Press to rotate to LOCK. Press to display LOCK menu. CH CTIO LOCK MODE HOW LONG ? N A 2 VOL VOL CH CHANNEL LOCK SET BLOCK PROGRAMS : U.S. MOVIES ON STATUS CHANGE CODE MODE 1 To use LOCK options ENTER CODE FIRST. 2 LOCK 3 4 5 6 7 8 9 Use the remote numeric keypad to enter a four-digit secret code.
LOCK Feature Press twice to return to the roller guide. CH CTIO N A To end Adjustment: VOL VOL EXIT CH LOCK TIMER Press to exit roller guide. This returns the set to normal viewing. NORMAL PICTURE OFF LOCK OFF LOCK MODE CH CTIO N A In LOCK MODE press to select OFF. VOL VOL TO SELECT LOCK MODE CH GAME In LOCK MODE press to select GAME. LOCK MODE VOL GAME LOCKS CH 3, 4 AND VIDEO INPUTS CH CTIO N A 1 LOCK VOL TO SELECT LOCK MODE CH Press ACTION twice.
LOCK Feature CHANNEL In LOCK MODE press to select CHANNEL. 1 LOCK MODE VOL CHANNEL LOCKS THESE CHANNELS 3 N A LOCK CH CTIO VOL TO MOVE CURSOR TO SELECT LOCK MODE CH Press to select channel position. CH CTIO N A 2 VOL VOL Press to select channels. (Or use remote numeric keypad to select channels.) CH 1 2 3 4 5 6 7 8 9 LOCK LOCK MODE CHANNEL LOCKS THESE CHANNELS 3 TO MOVE CURSOR TO SELECT CHANNEL 0 3 Repeat step 2 for up to four channels. Press ACTION twice.
V-CHIP Menu OPERATION In the United States and Canada, the V-CHIP consists of two rating systems, which are MPAA (MOTION PICTURE) and TV PARENTAL GUIDELINES. Its function is to block programs by following the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by using the LOCK MENU options. Press to display the roller guide menu. CH CTIO N A 1 VOL VOL CH EXIT Press to rotate to LOCK. TIMER Press to display LOCK menu.
V-CHIP Menu OPERATION U.S. TV PROGRAMS CH CTIO N A This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. PIP will also be blocked automatically. VOL VOL In U.S. TV PROGRAMS press to highlight STATUS. Press to display U.S. TV PROGRAMS RATING CHART. LOCK MODE HOW LONG ? CHANNEL LOCK SET BLOCK PROGRAMS : U.S. TV PROGRAMS ON STATUS CHANGE CODE CH Proceed to the following adjustments.
V-CHIP Menu OPERATION Customer Caution The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) per FCC Rules Section15.120(e)(2).
V-CHIP Menu OPERATION U.S. MOVIES This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will also be blocked automatically. CH CTIO Press to display U.S. MOVIES RATING CHART. N A In U.S. MOVIES press to highlight STATUS. VOL LOCK MODE HOW LONG ? VOL CHANGE CODE Proceed to the following adjustments.
V-CHIP Menu OPERATION Canadian English The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically. In CANADIAN ENGLISH press to highlight STATUS. CH CTIO N A 1 VOL VOL Press to display CANADIAN ENGLISH RATING CHART. LOCK MODE HOW LONG ? CHANNEL LOCK SET BLOCK PROGRAMS : U.S.
V-CHIP Menu OPERATION Canadian French The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically. In CANADIAN FRENCH press to highlight STATUS. CH CTIO N A 1 VOL VOL Press to display CANADIAN FRENCH RATING CHART. LOCK MODE HOW LONG ? CHANNEL LOCK SET BLOCK PROGRAMS : U.S. MOVIES ON STATUS CHANGE CODE CH LOCK CANADIAN FRENCH VIEW E PROGRAMS ? Press to select CANADIAN FRENCH.
V-CHIP Menu OPERATION Blocking Message If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component. Determine the manufacturer of the component and look in the table for the code.
Operating peripheral equipment using the remote control Programming Without A Code (When the code is not known) This procedure searches all codes and is called the “sequence method.” 1 Confirm that the external component is plugged in and on. 2 Turn the component off.
Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to pages 58 and 59 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control.
Operating peripheral equipment using the remote control Codes for Personal Video Recorders R VC Brand Panasonic Replay Philips Tivo Sony Tivo Code 100 101 102 Codes for DVD DVD Brand Denon Ferguson JVC Mitsubishi Nordmende Panasonic Philips Pioneer RCA Code 100 101 109 105 101 100 103 102 101 Brand Saba Samsung Sharp Sony Technics Thomson Toshiba Yamaha Zenith 101 110 108 104 100 101 103 100 107 Code Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sanyo Scott Sharp Sherwood Sony Soundesi
Operating peripheral equipment using the remote control Codes for Receivers RC VR Brand Admiral Aiwa Denon Fisher Garrard Harman Kardon Jensen JVC Kenwood Magnavox Marantz Mclntosh Nakamichi Onkyo Code 120 125, 126 134, 135, 136 104 113 115, 123 129 132, 133 100, 108 127 124 116 106 109, 114 Brand Optimus Panasonic Philips Pioneer Quasar RCA Sansui Sharp Sony Soundesign Teac Technics Victor Yamaha Code 103, 127, 130, 131 118, 119, 121 123 105, 107 118, 119, 121 103, 105, 127, 130, 131 103, 111, 139 134
Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode TV, DTV, CABLE, DBS, VCR, DVD etc.
Operating peripheral equipment using the remote control KEY NAME POWER SAP VCR MODE (DVD) DVD MODE (CD) AUX MODE (VCR2) (TAPE) RCVR MODE POWER POWER POWER POWER POWER POWER - - - - - - TV MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE RCVR MUTE - - - - - - TV INPUT SW TV INPUT SW - TV INPUT SW TV INPUT SW TV INPUT SW MUTE ASPECT TV/VIDEO LIGHT CH CTIO N A REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS VOL VOL CH BBE MENU REC
Troubleshooting Chart Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Power does not turn ON The power turns OFF (the Power LED blinks Orange and the TEMP LED and LAMP LED lights up Red). Remote control does not function Checks Page • Is the power plug plugged in? • Is the Power Indicator blinking Orange? • Check whether or not the air vents are clogged. • The lamp may be malfunctioning. Please consult your nearest dealer.
Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. 66 The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with the supplied soft cloth (Part No: TPEX007) from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth.
Specifications Power Source AC 120 V, 60 Hz Power Consumption Average use : 310W Stand-by condition : 0.65 W (when cooling fan is stopped) Display 52-inch, 16 : 9 aspect ratio Screen Size 45.31 ″ (1151 mm) (W) × 25.49 ″ (647.
Customer’s Record The serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
