TM DLP A TEXAS V HDT 1080 INSTRUMENTS TECHNOLOGY RT SPATIALIZ STEREO 3-D i / 720p COMPATIBLE Projection Television Operating Instructions Model No. HDTV PT-52DL10 SPATIALIZRT TM DLP 3-D STEREO COMPATIBLE 1080 i / 720p A TEXAS INSTRUMENTS TECHNOLOGY For assistance, please call : 1-888-VIEW PTV(843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www.panasonic.com (USA) For assistance, please call : 787-750-4300 or visit us at www.panasonic.
Important Safety Instructions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
Important Safety Instructions 12. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 13. Never push objects of any kind into this projection TV through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projection TV. 14.
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new projection television set. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site for USA : www.panasonic.
Table of Contents Important Safety Instructions ................................ 2 Installation ............................................................... 6 Receiver Location .................................................. 6 Optional External Equipment ................................. 6 AC Power Supply Cord .......................................... 6 Safety Precaution ................................................... 6 Remote Control Battery Installation .......................
Installation Receiver Location This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Installation Remote Control Battery Installation Requires two AA batteries (supplied). 1. Turn the Transmitter face down. Remove top cover by pressing down on marking and sliding cover off in the direction indicated. 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment). 3. Replace the cover and slide in reverse until the lock snaps.
Installation Connecting the Antenna Cable to the RF In Terminal Antenna Connection - For proper reception of VHF / UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to projection TV.
Installation Antenna Connection (Cable Box, no VCR) Use this configuration when connecting the projection TV to a cable TV system using a Cable Box.
Installation Antenna Connection (Cable Box, and VCR) Use this configuration when connecting the projection TV to a cable TV system using a Cable Box and VCR. ANTENNA TERMINALS ON THE BACK OF THE PROJECTION TV ANT1 SPLIT OUT ANT2 Y VIDEO PB PR L AUDIO R 1 COMPONENT 2 3 VIDEO INPUT S-VIDEO VIDEO L L ANT1 SPLIT OUT ANT2 TO AUDIO AMP AUDIO R R PROG OUT 1 2 3 INPUT Connect the cable from the Output terminal on the back of the Cable Box to the Antenna input terminal on the back of the VCR.
Installation How to connect the “1, 2, 3, 4” Input Terminals Connects VCRs and other peripheral equipment (Super-VHS VCR) R Audio OUT L Video OUT S-Video OUT S-VIDEO VIDEO AUDIO VIDEO L L TO AUDIO AMP AUDIO R R PROG OUT 1 2 3 INPUT Similar connections are available at the INPUT 1, 2, 4 input terminals.
Installation How to connect the COMPONENT VIDEO Input Terminals DVD Player R Audio OUT DVD(Y/PB/PR) OUT L PR PB Y DVD(Y/PB/PR) Y Y VIDEO PB PB PR PR AUDIO L AUDIO R 1 COMPONENT Note: Similar connections are available at the COMPONENT VIDEO Input 1, 2, 3 Terminals.
Installation How to connect the AV Prog. Out Terminals The “Prog. Out” Terminals output the same signals as the main picture on the projection TV screen and sound from the speaker at that time, e.g. TV programs or signals from INPUT 1, 2, 3, 4 terminals. Recording Equipment (VHS VCR) S-VIDEO Cable R Audio IN L Video IN S-Video IN S-VIDEO VIDEO L L TO AUDIO AMP AUDIO R VIDEO AUDIO R PROG OUT 1 2 3 INPUT Notes: • Never connect the VIDEO IN and Prog.
Installation How to connect the PC Input Terminals COMPUTER INPUT 4 PC INPUT VIDEO Conversion adapter (if necessary) L-AUDIO-R D-SUB 15P RGB PC cable (supplied) TSXF147 (1.5 m) Audio 2 × RCA plug Connect a cable which matches the audio output terminal on the computer. Signal Names for D-SUB 15P Connector 5 10 9 4 3 8 2 7 1 6 15 14 13 12 11 Pin Layout for PC Input Terminal Pin No. 1 2 3 4 5 Signal Name R G B GND (Ground) GND (Ground) Pin No. Signal Name Pin No.
Installation Analog RGB signals that can be input The table below lists the different types of analog RGB signals that can be input. If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed correctly, or black background may displayed. Display mode name No. of dots (H × V) Horizontal scanning frequency (kHz) Vertical scanning frequency (Hz) VGA400 640 × 400 640 × 400 640 × 480 640 × 480 640 × 480 640 × 480 640 × 480 24.8 31.5 31.5 35.0 37.
Location of Controls Illuminated Remote Control Power button Press to turn the projection TV ON or OFF. (See page 21) Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). MUTE button Push this button to mute the sound. (See page 35) Mode Selection buttons Selects the operation mode for the remote control.
Location of Controls ASPECT button Change of screen size. (See page 28) NORMAL FULL JUST Turning ON and OFF the remote control illumination ZOOM Remote control illumination can be turned ON and OFF by pressing the INFO/ RECALL button while pressing the R-TUNE button. R-TUNE Lights the remote control buttons The selected button blinks when lit. + INFO/RECALL LIGHT POWER ASPECT MUTE TV/VIDEO DVD AUX DTV CBL R TV/VIDEO buttons This input mode changes each time this button is pressed.
Location of Controls Controls and Terminals on the projection TV < FRONT > LAMP This indicator lights up when there is a malfunction with the lamp unit (see page 62, 71) TEMP This indicator lights up when there is an abnormal temperature in the unit (see page 71) POWER INDICATOR R-STAND BY G-POWER ON (see page 20, 21) POWER SWITCH (see page 20) Remote Control Sensor (see page 21) POWER R-STANDBY G-POWER ON LAMP TEMP A Open Press the mark on the center of the front cover to open.
< REAR > Monitor out terminals (see page 13) Input1 terminals (see page 11) Input2 terminals (see page 13) Input3 terminals (see page 13) Y VIDEO PB PR L Y VIDEO PB PR AUDIO L AUDIO R 1 COMPONENT 2 3 VIDEO INPUT S-VIDEO VIDEO L L ANT1 SPLIT OUT ANT2 TO AUDIO AMP AUDIO R R PROG OUT 1 2 3 INPUT R 1 COMPONENT 2 3 VIDEO INPUT S-VIDEO VIDEO Component signal input (see page 12) L L TO AUDIO AMP AUDIO R R PROG OUT 1 2 3 INPUT 19
Power ON / OFF Connecting the Plug to the Wall Outlet Turning the Power ON and OFF Always be sure to follow the procedure given below to turn the projection TV power ON and OFF. The lamp cooling fan will continue to operate for approximately 90 seconds after the power is turned off by the remote control. At the same time, the power indicator will blink Orange. Normally, use the remote control to turn the power OFF (turning the picture OFF).
Power ON / OFF Power (ON / OFF) button Push the Power button to turn the projection TV ON, from Stand-by mode. POWER LIGHT POWER The projection TV must first be switched on at the wall outlet and the Power switch. ASPECT MUTE TV/VIDEO DVD AUX DTV CBL R VC TV The Power Indicator will blink Green. RC VR CH Approximately 10 seconds DB S The Power Indicator will become Green.
Flow Chart of Main menu 1 2 If the MENU button is pressed, the MENU screen will be displayed. If the MENU button is pressed once more while the menu screen is displayed, the MENU screen will be cleared. Select MENU desired by pushing Right “ ” button or Left “ ” button. CH VOL ACTION VOL CH MENU LIGHT The Right “ ” button and Left “ ” button on the main body can also be used to select items on the MENU screen.
Flow Chart of Main menu 2 1 CH 1 ACTION VOL MENU ACTION TV/VIDEO VOL CH VOLUME The CHANNEL button on the main body can also be pressed to select items in the MENU screen. 2 TO POSITION/ SIZE TO PICTURE ADJUST menu PICTURE ADJ. TO AUDIO ADJUST menu POSITION/SIZE 30 BRIGHTNESS 0 COLOR 0 TINT 0 SHARPNESS 10 CLOCK AUDIO MENU — + — + — + NORMAL NORMAL DYNAMIC PICTURE TO CLOCK AUDIO ADJ.
Tuning channels (Automatic channel programming) Automatically searches and adds receivable channels to memory. Channel tuning cannot be performed when the MAIN picture is not receiving a TV broadcast (tuning is not possible). the MENU button to display the MENU 1 Press screen and select SETUP. MENU ADJUST LANGUAGE CH LIGHT POWER ASPECT MUTE TV/VIDEO DVD AUX DTV CBL R VOL ACTION VOL CH CH VOL ACTION VOL INFO/RECALL 2 CH RH-SPLIT VOL EXIT REW Press to display the PROGRAM CHANNELS.
Tuning channels (Automatic channel programming) 5 Press to select YES. CH AUTO PROGRAM In "AUTO PROGRAM" VOL ACTION CHANNEL VOL 59 MENU CH STOP Press to run AUTO PROGRAM. Channels will automatically advance until all channels have been scanned. Channel numbers with a video signal present will turn blue which indicates stored in the Channel Scan Memory. MENU Press to exit menu. Notes: When buttons are pressed with AUTO PROGRAM running, the projection TV set will return to normal viewing.
Tuning channels (Manual channel programming) Use this setting when changing setting of receiving channels or changing the channel display. Turn the projection TV on and select the broadcast channel. Follow the steps on the previous page to display the PROGRAM CHANNEL screen. This PROGRAM CHANNEL screen can be displayed when the MAIN picture is a TV broadcast. Selecting the PROGRAM CHANNELS menu. LIGHT POWER ASPECT MUTE 1 Press the MENU button to display the MENU screen and select SETUP.
Tuning channels (Manual channel programming) Adding or deleting channels 4 CH MANUAL PROGRAM Press to select channel ( or number keys ). VOL ACTION ENTER CHANNEL; 122 VOL DELETE EXIT ADD CH SELECT (or number key) CH 5 Press to add channels to memory ( blue ). CH Press to select channel. VOL ACTION CH VOL Press to delete channels from memory ( yellow ). 6 Repeat steps 4 and 5 to continue adding or deleting channels. MENU Press to exit menu.
ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT LIGHT POWER ASPECT MUTE TV/VIDEO AUX DVD R VC ASPECT button The aspect mode changes each time the ASPECT button is pressed.
ASPECT Controls Explanation Picture Mode NORMAL will display a 4:3 picture at its standard 4:3 size. 4 NORMAL NORMAL 3 4 ZOOM mode magnifies the central section of the picture. 16 ZOOM ZOOM 3 9 4 FULL will display the picture at its maximum size but with sight elongation.
VHF, UHF and CATV MENU MENU ACTION TV/VIDEO VOLUME ACTION TV/VIDEO VOLUME CHANNEL CHANNEL Operation can be done from the projection TV. Power switch • Channel buttons • Volume buttons Remote control sensor 1 POWER 2 TV Press to turn the projection TV on (see page 21). LIGHT POWER ASPECT MUTE TV/VIDEO DVD AUX DTV CBL R RC Press to operate the projection TV with the remote control.
Cable TV ANTENNA TERMINALS ON THE BACK OF THE PROJECTION TV ANT1 SPLIT OUT ANT2 Y VIDEO PB PR L AUDIO R 1 COMPONENT 2 3 VIDEO INPUT S-VIDEO VIDEO L L ANT1 SPLIT OUT TO AUDIO AMP AUDIO ANT2 R To antenna Input R PROG OUT 1 2 3 INPUT Incoming Cable from Antenna or Cable TV System.
Searching for the desired channel (Channel search) SEARCH STOP LIGHT POWER ASPECT MUTE TV/VIDEO AUX DVD R VC VR CBL DTV TV DB S CH ACTION VOL MENU AV-ADJ EXIT REW OPEN/CLOSE VOL CH NORMAL GAME VCR REC SEARCH STOP PLAY VCR/DBS CHANNEL RH-SPLIT CH3 • INFO/RECALL Sound from the left screen is output from the speakers on the projection TV set. 1 2 4 5 6 7 Ex. Select channel 7 CH7 GUIDE SPLIT FF SWAP FREEZE TV/VCR When a channel button is pressed during channel search.
Playing a VCR or other peripheral equipment Confirming connections A video camera uses the Video Input 4 terminal on the front of the projection TV. Video camera VCR Laser Disk Player INPUT 4 PC INPUT S-VIDEO VIDEO L-AUDIO-R Confirm that the projection TV is in standby mode. DVD player To S-video output or video output This equipment can also be connected to the rear terminals. See Connections for details.
Playing games in game mode Confirming connections Example: When using the Video Input 4 terminal on the front of the projection TV. Video game player INPUT 4 PC INPUT S-VIDEO VIDEO L-AUDIO-R Confirm that the projection TV is in standby mode. To S-video output or video output INPUT 4 PC INPUT S-VIDEO VIDEO L-AUDIO-R To audio output Turning on the projection TV and switching to game modes 1 LIGHT POWER ASPECT MUTE POWER Turn on the TV.
Recall / Mute Recall (On-screen display) INFO/RECALL LIGHT POWER ASPECT MUTE TV/VIDEO DVD AUX DTV CBL R Press this button to display channel number, off-timer remaining time, screen modes, and other settings. For approximately 10 seconds, only the channel number remains,..... The channel number remains, but other information disappears after a specified period. Press this button again to delete channel number display.
Split screen Split screen enables you to search other channels on the right screen or check video recording status. Splitting the screen SPLIT FF Selecting the screen mode for split screen. Press to split LIGHT POWER ASPECT ASPECT (The previously selected screen appears on the left.) CH10 DVD AUX DTV CBL R TV CH DB VOL ACTION VOL CH10 CH3 CH3 AV-ADJ Example: Two screen mode set to NORMAL aspect. • Returning to one screen.
Split screen Changing the channel of the right screen during SPLIT SCREEN FULL, SPLIT SCREEN NORMAL, and PoutP. 1 RH-SPLIT Swapping left and right screens SWAP PAUSE STILL Press to operate right screen. CH10 CH3 During SPLIT SCREEN FULL, SPLIT SCREEN NORMAL, PoutP: Press to swap. Example: During SPLIT SCREEN NORMAL. CH10 CH10 ACTIVE ACTIVE CH3 CH5 2 CH5 CH10 5 While is displayed on the screen, press to switch modes. CH10 ACTIVE CH5 Example: Change to channel 5.
Adjusting screen position and size Adjusting screen 1 ASPECT 2 MENU Press to select the screen mode to adjust. LIGHT POWER ASPECT MUTE TV/VIDEO AUX DVD R VC RC VR Press to display the menu screen. CBL DTV TV CH DB VOL ACTION VOL S MENU TV / VIDEO / COMPONENT mode Press to select ADJUST menu.
Adjusting screen position and size Switching screen width During NORMAL mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2. Press to narrow (SIZE 2). CH VOL ACTION (SIZE 1) VOL CH (SIZE 2) Press to widen (SIZE 1). During JUST mode, if noise appears on the ends of the image in SIZE 1, switch to SIZE 2. Press to enlarge image horizontally (SIZE 2). CH VOL ACTION VOL CH Press to shrink image horizontally (SIZE 1).
Audio Adjustments 1 Press the MENU button to display the MENU screen and select ADJUST. 2 Select AUDIO ADJUST of ADJUST from the MENU screen. MENU ADJUST CH ACTION CLOCK AUDIO AUDIO ADJUST VOL PAGE CH 3 SET UP POSITION/SIZE Press to select AUDIO ADJUST VOL CUSTOM PICTURE PICTURE ADJUST Press when AUDIO ADJUST screen is displayed. ACTION SELECT EXIT Press to select the menu to adjust each item. CH Select the desired level by listening at the sound.
Audio Adjustments Turning the speaker sound ON and OFF SPEAKERS OFF Turns off the speaker sound. AUDIO ADJ. SPEAKERS OFF NORMAL ON AUDIO MENU BASS SPEAKERS ON Speaker sound is normal. SPEAKERS OFF ON AUTO 6 TREBLE 4 BALANCE 0 — + — + — + SPATIALIZER OFF ON SPEAKERS OFF ON CHANGE SELECT EXIT MENU • To end adjustments Press MENU button. Notes: Sound signals are output from the rear AUDIO OUT terminal.
Picture Adjustments 1 Press the MENU button to display the MENU screen and select ADJUST. MENU ADJUST CH Press to select to PICTURE ADJUST. VOL ACTION SET UP CUSTOM PICTURE PICTURE ADJUST POSITION/SIZE VOL CLOCK CH AUDIO AUDIO ADJUST Press when PICTURE ADJUST screen is displayed. PAGE SELECT ACTION EXIT NORMAL is displayed at default. When setting are altered, changes to NORMALIZE. PICTURE ADJ. 2 Press to select the menu to adjust.
Picture Adjustments PICTURE Selects proper brightness and density for the room. PICTURE ADJ. NORMAL PICTURE MENU BRIGHTNESS Adjusts for easier viewing of dark pictures such as night scenes and hair. COLOR Adjusts slightly to a lighter color. DYNAMIC PICTURE 30 BRIGHTNESS 0 COLOR 0 TINT 0 SHARPNESS 10 COLOR TEMP TINT Adjust for proper skin color. + — + — + — + COOL BLACK EXT. SHARPNESS Displays a sharp image.
Picture Adjustments By pressing the AV-ADJ button on the remote control, PICTURE ADJUST and AUDIO ADJUST can be directly adjusted instead of starting from the MAIN menu. AV-ADJ The selected menu will change each time the AV-ADJ button is pressed (press till the desired menu is displayed). Adjust using the left CH VOL ACTION CH VOL or right button.
Playing special video software When playing special images such as three dimensional video disks on video disk players or game software on video game players, use GAME mode. Use TV mode for normal viewing. Selecting VIDEO menu Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM LANGUAGE PROGRAM CHANNELS CH LOCK Press to select VIDEO. CLOSED CAPTION ACTION VOL VIDEO VOL PAGE ACTION SELECT EXIT CH Press to display the VIDEO screen.
Closed Captions This receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form of written words across the screen (white or colored letters on a black background). It allows the viewer to read the dialogue of a television program or other information. 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH LANGUAGE Press to select CLOSED CAPTION.
Closed Captions CC MODE 3 Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. Press to select CC MODE. CH CLOSED CAPTION Press to select from the following: VOL ACTION ON MUTE NO MODE OFF VOL CHANGE OFF C1 C2 T1 T2 SELECT EXIT CH T4 T3 C4 C3 • CAPTION OFF - Recommended mode when Closed Caption is not being used.
Lock Feature In the United States, the V-CHIP consists of two rating systems, one for motion pictures and one for TV programs. Their function is to block programs by the rating data in the XDS data packets sent from broadcasting stations. The user can select which rating programs should be blocked by the LOCK MENU options. Press the MENU button to display the MENU screen and select SETUP. 1 LIGHT POWER CH Press to select LOCK.
Lock Feature 3 CH MOTION PICTURE RATING Press to select rating to lock. VOL ACTION VIEW NR PROGRAMS? NO VOL CH Press to select YES or NO. CH NO RATING VOL ACTION YES G PG PG-13 R NC17 X VOL CH RATING SELECT EXIT Rating (turns red when on) G : General audience PG : Parental guidance suggested PG-13: Parental guidance needed under 13 years old R : Restricted NC17 : No one under 17 is admitted X : Pornography EXIT Press to return to LOCK screen. MOTION PICT. STATUS.
Lock Feature TV PARENTAL STATUS LOCK Press to select TV PARENTAL STATUS. CH MOTION PICT. STATUS OFF ON CHANGE SETTING TV PARENTAL STATUS OFF Press to select ON or OFF. ACTION VOL VOL ON CHANGE SETTING CHANGE CODE — — — — CH CHANGE SELECT EXIT Changing setting CH TV PARENTAL GUIDE Press to select CHANGE SETTING. VIEW NR PROGRAMS? NO ACTION VOL SETTING VOL CH Press to display the TV PARENTAL GUIDE screen.
Customizing the VIDEO INPUT labels Display for each VIDEO INPUT can be changed to match with the connected device (VCR, video games). Example: When changing VIDEO 3 to LD. 1 Press the MENU button to display the MENU screen and select SETUP. CH MENU ADJUST SET UP CUSTOM LANGUAGE Press to select VIDEO. PROGRAM CHANNELS LOCK VOL ACTION VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen.
Customizing the VIDEO INPUT labels 3 CH VIDEO INPUT LABEL Press to select VIDEO INPUT to change. ACTION VOL VOL VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 2 VIDEO 3 VIDEO 3 VIDEO 4 CH Press to change.
Selecting STEREO / SAP / MONO Mode - Stereo / SAP / Mono When Audio is broadcast in Stereo or SAP an ON Screen display will appear on initial “Turn On” and “Channel Change”. The available choices will be indicated in Green. Press the MENU button to display the MENU screen and select CUSTOM . MENU ADJUST SET UP CUSTOM CH Press to select AUDIO MODE. CHANNEL SEARCH SLEEP TIMER VOL ACTION VOL CH 0 AUDIO MODE Press to display the AUDIO MODE screen.
Using the off-timer Press the MENU button to display the menu screen and select CUSTOM. 1 CH MENU ADJUST Press to select SLEEP TIMER. VOL ACTION VOL SET UP CUSTOM CHANNEL SEARCH SLEEP TIMER 0 AUDIO MODE CH Press to displayed SLEEP TIMER adjust screen. PAGE ACTION SELECT EXIT 2 Press the left “ ” or right “ ” button and select the desired sleep time from CH SLEEP TIMER SLEEP TIMER VOL ACTION VOL 0 30 select times.
Video game player to VIDEO INPUT 1 Press the MENU button to display the MENU screen and select SETUP. CH MENU ADJUST Press to select VIDEO. VOL ACTION SET UP CUSTOM LANGUAGE VOL PROGRAM CHANNELS LOCK CLOSED CAPTION CH Press to display the VIDEO screen. VIDEO PAGE ACTION SELECT EXIT CH VIDEO Press to select GAME. Changing the video game player input terminal.
Optimizing display for DVC recording mode (DVC PLAYBACK MODE) When playing back recordings made by a DVC in FRAME mode, images will have higher resolution. 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH Press to select VIDEO. VOL ACTION LANGUAGE PROGRAM CHANNELS LOCK VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen. PAGE ACTION SELECT EXIT CH Press to select DVC PLAYBACK MODE.
Turning OFF digital comb filter 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH LANGUAGE Press to select VIDEO. VOL ACTION PROGRAM CHANNELS LOCK VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen. PAGE ACTION SELECT EXIT CH VIDEO Press to select 3D Y/C FILTER. VOL ACTION VOL PAGE 2 / 3 3D Y/C FILTER OFF ON OFF ON ID-1 SCAN MODE TV CH CHANGE GAME SELECT EXIT 2 Press to turn OFF.
Automatically changing screen size for VIDEO INPUT modes If the received signal contains screen size specifications in VIDEO INPUT (1-4) or COMPONENT VIDEO INPUT (1 – 3), the screen size is automatically changed. 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH LANGUAGE Press to select VIDEO. VOL ACTION PROGRAM CHANNELS LOCK VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen. PAGE ACTION SELECT EXIT CH VIDEO Press to select ID-1.
Setting when 480p signals (sequential scan) are input through COMPONENT VIDEO INPUT Adjust 480p signals to achieve a natural color from digital equipment connected to COMPONENT VIDEO INPUT (Y, Pb / Cb ,Pr / Cr input terminals). 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH Press to select VIDEO. VOL ACTION LANGUAGE PROGRAM CHANNELS LOCK VOL CLOSED CAPTION VIDEO CH Press to display the VIDEO screen.
CLOCK CLOCK is valid only during PC mode. When an RGB signal is projected, minor adjustments of the dot clock frequency and adjustments of the phase can be made. Adjusting the clock When the set is connected to the PC, CLOCK can be adjust. 1 Connect a computer to the projection TV. 2 PC MENU Press to select the PC mode. MENU ADJUST 3 TV/VIDEO Press to display the MENU screen.
Switching languages for display 1 Press the MENU button to display the MENU screen and select SETUP. MENU ADJUST SET UP CUSTOM CH Press to select LANGUAGE. VOL ACTION LANGUAGE PROGRAM CHANNELS LOCK VOL CLOSED CAPTION VIDEO CH Press to display the LANGUAGE screen. PAGE ACTION SELECT EXIT 2 Press to select preferred language. CH LANGUAGE LANGUAGE ENGLISH FRAN AIS VOL ACTION VOL CHANGE EXIT CH MENU Press to exit menu.
Replacing the lamp unit The lamp unit is sold separately. To purchase a replacement, call the Panasonic accessory department, toll free at: 1-800-332-5368. Lamp unit Part No. : TY-LA2000 Lamp unit replacement period The lamp unit for the projection TV should be replaced after approximately 5,000 hours of use in the normal usage mode. • Warning display after 5,000 hours of use When the power has been turned off after over 5000 hours of continued use, LAMP REPLACE will be displayed for approximately 1 min.
Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The remote control can be preset for other manufactures, by utilizing the REMOTE MODE SELECTION BUTTONS for CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD, CD, LD) ,DBS and AUX (for Cassette Player or a VCR2.) (Details on remote control buttons to operate peripheral equipment See page 65 to 67 and 68 to 70) 1 Setting up the remote using the numerical keys.
Operating peripheral equipment using the remote control 2 Setting to the remote using the step and set method (When code not known): 1 LIGHT POWER Press and hold the POWER and ACTION keys simultaneously for three full seconds. After 3 seconds, all the illuminated mode keys will begin to flash. Then let go of the POWER and ACTION key.
Operating peripheral equipment using the remote control Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to page 63 and 64 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control.
Operating peripheral equipment using the remote control CABLE CONVERTER BOX AND DVD, CD, LD, PLAYERS Infrared Codes Index Cable CBL Maker List (CBL) Maker Set Up No. Maker Set Up No.
Operating peripheral equipment using the remote control CASSETTE PLAYERS, RECEIVERS, AMPLIFIERS, and DBS Infrared Codes Index Cassette Players Maker List (TAPE) Maker Set Up No. Maker Set Up No. PANASONIC 700, 730 TECHNICS 700, 730 AUX Receiver Amplifiers RC VR Maker List (RCVR) Maker Set Up No. Maker Set Up No.
Operating peripheral equipment using the remote control Remote Control Quick Reference Functional Key Control KEY MODE 1 2 3 4 5 6 7 8 9 TV, DTV, VCR AUX (VCR2) CABLE, DBS RCVR (Receiver / Amplifier) DVD (DVD, CD, LD) TV 1 Selects Video 1 2 Selects Video 2 3 Selects Video 3 4 Selects Video 4 5 Selects CD 6 Selects Tuner 7 Selects Phone 8 Selects Tape 9 Selects AUX Selects Track Number Selects TV Input Mode ALL COMPONENTS Turns On and Off Select Components TV, VCR, DBS, DTV CABLE DVD RCVR (Re
Operating peripheral equipment using the remote control Remote Control Quick Reference Functional Key Control KEY R-TUNE ACTION INFO/RECALL REW SPLIT FF PLAY SEARCH STOP VCR REC SWAP PAUSE STILL MODE FUNCTION TV CABLE DBS DVD (DVD) DVD (CD) DVD (LD) DTV AUX (Tape Cassette Player) TV CABLE DBS DTV DVD Selects Previously Tuned Channel Selects Previously Tuned Channel Selects Previously Tuned Channel Selects Previously Title Selects Next Disc Side A / B Prev.
Operating peripheral equipment using the remote control Remote Control Quick Reference Functional Key Control KEY FREEZE TV/VCR OPEN/CLOSE ASPECT CHANNEL VCR/DBS AV-ADJ NORMAL GAME RH-SPLIT EXIT PROG GUIDE MENU 70 MODE FUNCTION TV VCR DVD (DVD, CD, LD) AUX (Tape Cassette Player) TV DBS DTV (STB) VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR VCR CABLE DBS DVD (DVD) DVD (CD) DVD (LD) RCVR TV SPLIT Freeze TV/VCR Switch Open / Close Tape Open / Close TV Aspect DBS Aspect STB Aspect VCR Channel
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Power does not turn ON The power turns OFF (the Power LED blinks Orange and the TEMP LED and LAMP LED lights up Red). Checks Page • Is the power plug plugged in? • If the power does not turn on using the remote, check if the projection TV set is turned on. • Is the Power Indicator blink Orange? • Check whether or not the sir vents are clogged.
Cleaning To ensure continued excellent performance by this product, periodic cleaning is recommended. 72 The unit contains many plastic parts. For this reason DO NOT use benzine, thinner or other chemicals to clean the unit. Dust will accumulate on the picture screen. Please wipe with the supplied soft cloth (Part No: TPEX007) from time to time. If you use a chemically treated cloth, please be careful to follow the instructions that come with the cloth.
Specifications Power Source AC 120 V, 60 Hz Power Consumption Average use : Maximum Current 3.8 A Stand-by condition : 0.74 W (when cooling fan is stopped) Display 52-inch, 16 : 9 aspect ratio Screen Size 45.31 ″ (1151 mm) (W) × 25.49 ″ (647.
MEMO 74
MEMO 75
Customer’ Record The serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
