user manual

ManualsBrandsPanasonic ManualsProjectorProjector PT-DW10000

Panasonic Projector RS-232C Control Specifications

P T- D W 1 0 0 0 0 / D 1 0 0 0 0

Summary of content (62 pages)

PAGE 1
Panasonic Projector RS-232C Control Specifications P T- D W 1 0 0 0 0 / D 1 0 0 0 0
PAGE 2
Using the Serial Terminals 1. Basic Format Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control.
PAGE 3
Response (Callback) of the basic control command In the period when commands can be accepted Differs according to each command. In the period when commands cannot be accepted Hexadecimal 02h 45h 52h 34h 30h 31h E R 4 0 1 45h 52h 34h 30h 32h E R 4 0 2 Character 03h In case of the parameter error Hexadecimal 02h Character 03h Notes when two or more projectors are used • Make the communication conditions the same between output/input.
PAGE 4
2. Basic Control Command Explanatory notes Yes: Enable No: Disable 2.1.
PAGE 5
2.5.
PAGE 6
2.8. MENU key Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 4Fh O 4Dh M 4Eh N 03h 45h E 4Eh N 03h 43h C 55h U 03h 43h C 44h D 03h 43h C 4Ch L 03h Response (Callback) In the period when the command can be accepted Hexadecimal 02h 4Fh 4Dh 4Eh 03h Character O M N Acceptability SECURITY STNDBY NO SIGNAL SHUTTER TEST PATTERN Yes No Yes No Yes 2.9.
PAGE 7
2.13. Right ( ) key Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 3Bh ; 4Fh O 43h C 52h R 03h 53h S 54h T 03h 43h C 31h 1 03h 53h S 4Ch L 03h Response (Callback) In the period when the command can be accepted Hexadecimal 02h 4Fh 43h 52h 03h Character O C R Acceptability SECURITY STNDBY NO SIGNAL SHUTTER TEST PATTERN Yes No Yes No Yes REMOTE2 Yes 2.14.
PAGE 8
2.18.
PAGE 9
2.21.
PAGE 10
2.24.
PAGE 11
2.27. COLOR TEMP.
PAGE 12
2.30.
PAGE 13
2.33.
PAGE 14
2.36.
PAGE 15
2.38. DYNAMIC IRIS Hexadecimal Character Hexadecimal Character 02h *1 *2 41h A *3 *4 44h D *5 *6 5Ah Z 03h 5Ah Z 3Bh ; 4Fh O 41h A 49h I 3Ah : Parameters (*1, *2) Mode OFF 1 2 3 USER AUTO IRIS 41h A MANUAL IRIS DYNAMIC-GAMMA Hexadecimal 30h 31h 32h 33h 34h 4Dh Character 0 1 2 3 4 M * When Mode is OFF—USER, parameters *3—*6 are not sent.
PAGE 16
2.41.
PAGE 17
2.44.
PAGE 18
2.46.
PAGE 19
2.47.
PAGE 20
2.50.
PAGE 21
2.52.
PAGE 22
2.55.
PAGE 23
2.58.
PAGE 24
2.60.
PAGE 25
2.62.
PAGE 26
2.65.
PAGE 27
2.68.
PAGE 28
2.71.
PAGE 29
2.73.
PAGE 30
2.76.
PAGE 31
2.78.
PAGE 32
2.80.
PAGE 33
2.83. Set Time Hexadecimal Character Hexadecimal Character 02h *h1 41h A *h2 44h D *m1 5Ah Z *m2 3Bh ; *s2 54h T 03h 53h S 54h T 3Ah : Parameters *h1, *h2: Hour (2 digits) *m1, *m2 Minute (2 digits) *s1, *s2 Second (2 digits) Set it by UTC (Coordinated Universal Time). Example: 3 seconds at 3:45 p.m.
PAGE 34
2.86.
PAGE 35
2.89.
PAGE 36
2.92. Query COLOR TEMP. Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 3Bh ; 51h Q 03h REMOTE2 Yes Parameters (*1, *2, *3, *4) LOW 30h 0 Hexadecimal Character 45h E Response (Callback) In the period when the command can be accepted Hexadecimal 02h *1 *3 03h Character *2 *4 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER TEST PATTERN Yes No Yes Yes Yes 54h T MIDDLE 31h 1 HIGH 32h 2 USER1 34h 4 USER2 39h 9 Note: • The response (callback) other than DEFAULT (10) is one digit. 2.
PAGE 37
2.95.
PAGE 38
2.98.
PAGE 39
2.101.
PAGE 40
2.104.
PAGE 41
2.106.
PAGE 42
2.108.
PAGE 43
2.109.
PAGE 44
2.112.
PAGE 45
2.115.
PAGE 46
2.118.
PAGE 47
2.121.
PAGE 48
2.123.
PAGE 49
2.126.
PAGE 50
2.129. Query Lamp Status Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 3Bh ; 51h Q $ 53h S 03h 59h Y 03h 4Dh M 3Ah : Response (Callback) Lamp OFF Hexadecimal 02h 30h 03h Character 0 In turning ON Hexadecimal 02h 31h 03h Character 1 Lamp ON Hexadecimal 02h 31h 03h Character 2 Cooling Hexadecimal 02h 33h 03h Character 3 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes Yes Yes Yes TEST PATTERN Yes REMOTE2 Yes 2.130.
PAGE 51
2.132. Query ALTITUDE Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 3Bh ; 51h Q 46h F 4Dh M 03h 43h C 03h 42h B 03h 4Ch D 03h Response (Callback) LOW Hexadecimal 02h 30h 03h Character 0 HIGH Hexadecimal 02h 31h 03h Character 1 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes Yes Yes Yes TEST PATTERN Yes REMOTE2 Yes 2.133.
PAGE 52
2.136. Query AUX DVI EDID Hexadecimal Character Hexadecimal Character 02h 41h A 41h A 55h U 44h D 58h X 5Ah Z 03h 5Ah Z 51h Q 42h E 4Ch D 3Ah : 50h P 03h Response (Callback) In the period when the command can be accepted Hexadecimal 02h *1 03h Character *2 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes Yes Yes Yes 3Bh ; TEST PATTERN Yes REMOTE2 Yes Parameters (*1, *2) EDID1 31h 1 Hexadecimal Character EDID2(PC) 32h 2 2.137.
PAGE 53
2.139.
PAGE 54
2.140.
PAGE 55
2.142.
PAGE 56
2.143.
PAGE 57
2.145. Query P IN P — TYPE Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 50h P 54h T 03h TEST PATTERN Yes 44h D 03h REMOTE2 Yes Parameters (*1, *2) Hexadecimal Character 51h Q Response (Callback) In the period when the command can be accepted Hexadecimal 02h *1 03h Character *2 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes No Yes Yes 3Bh ; MAIN WINDOW 30h 0 SUB WINDOW 31h 1 Note: •When FRAME DELAY is set besides DEFAULT, ER401 is returned. 2.146.
PAGE 58
2.148. Query Model (Series) Name Hexadecimal Character 02h 41h A 44h D 5Ah Z 5Ah Z 3Bh ; 51h Q 49h I 44h D 03h Response (Callback) In the period when the command can be accepted D10000 Hexadecimal 02h 44h 31h 30h Character D 1 0 DW10000 Hexadecimal 02h 44h 57h 31h Character D W 1 Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes Yes Yes Yes 30h 0 30h 0 30h 0 03h 30h 0 30h 0 30h 0 30h 0 TEST PATTERN Yes 03h REMOTE2 Yes 2.149.
PAGE 59
ID of the extended control command ALL 00 ID23 17 ID46 2E Group E Hexadecimal (1 byte) 84 ID1 01 ID24 18 ID47 2F Group F 85 ID2 02 ID25 19 ID48 30 Group G 86 ID3 03 ID26 1A ID49 31 Group H 87 ID4 04 ID27 1B ID50 32 Group I 88 ID5 05 ID28 1C ID51 33 Group J 89 ID6 06 ID29 1D ID52 34 Group K 8A ID7 07 ID30 1E ID53 35 Group L 8B ID8 08 ID31 1F ID54 36 Group M 8C ID9 09 ID32 20 ID55 37 Group N 8D ID10 0A ID33 21 ID56 38 Group
PAGE 60
2.151. SELF CHECK Information Hexadecimal Remarks 02h STX *1 ID FEh Command 03h ETX Response (Callback) In the period when the command can be accepted Hexadecimal 02h *5 FEh FEh STX ID Acceptability SECURITY STNDBY NO SIGNAL SHUTTER Yes Yes Yes Yes FEh Option *2 *3 *4 TEST PATTERN Yes — *15 Parameters *16 *17 03h REMOTE2 Yes Parameters (*2—*17) Bit Name Description Condition of Clear Bit 0 Temperature warning (IN) Intake air temperature is the specific value or higher.
PAGE 61
32 Thermosensor disconnected (IN) Intake air thermosensor is disconnected. 33 Thermosensor disconnected Optical module (DMD) thermosensor is disconnected. MAIN POWER ON (OPT) 34 Thermosensor disconnected Exhaust air thermosensor is disconnected. (OUT) 35 Airflow sensor disconnected 36 Air filter is blocked 37 Internal clock battery replacement 38 — 39 — 40 — 41 — 42 — 43 — 44 — 45 — 46 — 47 — Airflow sensor is disconnected.
PAGE 62
82 FPGA2 FULL-HD configuration error 83 FLASH ROM error 84 RAM error 85 FPGA evolvement error 86 Lens shift error 87 — 88 — 89 — 90 — 91 — 92 — 93 — 94 — 95 — 96 RESIZE setting error MAIN POWER ON 97 Network CPU communication MAIN POWER ON error 98 Sub CPU communication error 99 IIC communication retry 1 100 IIC communication retry 2 101 IIC communication retry 3 102 IIC communication retry 4 103 IIC communication retry 5 104 IIC communication retry 6 105 IIC