Installation Instructions Outdoor Domed Housings POD9C(W)/POD9CF(W) Manufactured By: for ® Before attempting to connect or operate this product, please read these instructions completely.
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and user instructions should be followed. 5. Electrical Connections - Only a qualified electrician should make electrical connections. 6.
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY): ! INSTALLING PENDANT MOUNT (POD9CW/POD9CFW) Power 24VAC, Class 2 Only 1. This unit includes a 1 1/2" NPT coupling for a standard 1 1/2" NPT pipe. The POD9 can be used with other brackets designed with 1 1/2" male pipe threads, such as the Panasonic PWM20G and PWM30G wall mount brackets. 52 watts at 24 VAC (Heater & Blower) Accessory Power Heater: 50 watts Blower: 1.
WJ-HD316A WU-CU650 Wiring Color Code Power and Control Inputs How to assemble the connector • Strip back the cable jacket approximately 0.1 inch (3 mm) and separate the individual conductors. Approx. 0.
INSTALLING QUICK RELEASE BRACKET AND PAN/TILT CAMERA ASSEMBLY (ALL MODELS) 1. Open the housing by loosening the (3) screws on the dome trim ring (Figure 1). Note the arrows and the word "Locked" on the side of the housing and trim ring. Rotate the trim ring until the bottom arrow aligns with the second top arrow, then pull the dome and trim ring off. ! INSTALLATION FOR WV-CS574 UNITIZED CAMERA 1. Installation for WV-CS574 Unitized Camera.
INSTALLING FIXED CAMERA BRACKET (ALL MODELS) 1. Loosen the two pan adjustment screws and rotate the bracket to the desired viewing location. NOTE: A 90˚ BNC connector is included in the packet to assist in fitting the camera (Figure 6). Pan adjustment screw Pan adjustment screw Figure 6 4. Attach the camera to the bracket using the 1/4-20 hex bolt provided. Make final adjustments and lock down the pan, tilt, and height adjustment screws (Figure 7). Figure 3 2.
EXPLODED VIEWS OF HOUSING 10 Wall Mount Assembly Item No. Description 9 Part No.
Mounting Template R .733 2.132 5.500 1.537 2.981 2.000 3.
