PLCD20P 20-INCH PREMIUM TFT-LCD MONITOR INSTRUCTION MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference. SAFETY INSTRUCTION…………………………………………………………………….2 - 3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 26 MOUNTING GUIDE …………………………………………………………….……..…….. 27 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………….
1…………………………………………………………………………… INSTRUCTION MANUAL 1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use this product near water. 6. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. 7.
INSTRUCTION MANUAL……………………………………………………………………………… 2 13. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel. 14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C.
3 ……………………………………………………………………………… INSTRUCTION MANUAL ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. ▶ DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases.
INSTRUCTION MANUAL …………………………………………………………………………… 4 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
5 ……………………………………………………………………………… INSTRUCTION MANUAL A. BOTTOM PANEL CONTROL 7 6 5 43 2 1 1. DC 12V IN 2. COMPONENT Y,Pb,Pr & SOUND L,R 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN B. SIDE PANEL CONTROL 1. VIDEO 1(AV1) IN 1 2. VIDEO 1(AV1) OUT 2 3. VIDEO 2(AV2) IN 3 4. VIDEO 2(AV2) OUT 4 5. S-VIDEO (Y/C) IN 5 6. S-VIDEO (Y/C) OUT 7. AV1, S-VIDEO AUDIO IN 8. AV1, S-VIDEO AUDIO OUT 9. AV2 AUDIO IN 10. AV2 AUDIO OUT 11.
11 INSTRUCTION MANUAL…………………………………………………………………………… 6 C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1/AV2/S-Video/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. MUTE Mute the sound. 5. MENU Activates and exits the On Screen Display. 6. EXIT Exit the On Screen Display. 7. VOL( ) Increases or decreases the level of audio volume. 8. UP/DOWN Move to OSD menu. 9.
Select Colour mode. 20. S.SET Select Sound mode main input or sub input 21. PC Select PC mode(PC,DVI) 22. AV Select AV mode.(AV1,AV2,S-VIDEO) 23. COMP Select COMPONENT mode. 7 …………………………………………………………………………… INSTRUCTION MANUAL D. FRONT KEY CONTROL 1 2 3 4 5 6 7 8 9 1. MENU Activates and exits the On Screen Display. 2. SOURCE / SELECT Select PC or video source. Select On Screen Display menu 3 / 4. ▼ / ▲ This button allows user to enter the sub-menu of the activated function 5 / 6.
9. POWER ON/OFF( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. INSTRUCTION MANUAL…………………………………………………………………………… 8 A: CUSTOM MENU (Only PC mode) Press the MENU button and then up(▲) / down(▼) button to select the Custom menu. Press the up(▲) / down(▼) button to select Custom sub menu. Press (◀) /right(▶) button to adjust picture setting. Press the MENU button to save.
INSTRUCTION MANUAL…………………………………………………………………………… 10 B. Picture / Sound Menu(Only Video mode) 4:3 Press the MENU button and then up(▲) / down(▼) button to select the Picture / Sound. Press the right(▶) or ENTER button. 1. Picture Mode Press the up(▲) / down(▼) button to select the Picture Mode. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Picture Mode.
Press the MENU button to save. 11 …………………………………………………………………………… INSTRUCTION MANUAL 2. Color Tone 4:3 Press the up(▲) / down(▼) button to select the Color Tone. 4:3 Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired color tone. Press the MENU button to save.
INSTRUCTION MANUAL…………………………………………………………………………… 12 3. Mute 4:3 Press the up(▲) / down(▼) button to select the Mute. 4:3 Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Mute. Press the MENU button to save. 4.
Press the up(▲) / down(▼) button to select the Volume. Press (◀) /right(▶) button to adjust Volume. Press the MENU button to save. 13 …………………………………………………………………………… INSTRUCTION MANUAL 5. Size 4:3 Press the up(▲) / down(▼) button to select the Size. Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Size. Press the MENU button to save. 6.
Press the up(▲) / down(▼) button to select the NR. INSTRUCTION MANUAL………………………………………………………………………………14 Press the (▶) or ENTER button and then up(▲) / down(▼) button to select on or off. Press the MENU button to save 6.
15 …………………………………………………………………………… INSTRUCTION MANUAL Press the up(▲) / down(▼) button to select PC sub menu Press the right(▶) or ENTER button and then left (◀) /right(▶) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elements. H. position: Move image horizontally on screen right or left. V. position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. C.
Press the MENU button and then up(▲) / down(▼) button to select the PIP menu. Press the right(▶) or ENTER button. INSTRUCTION MANUAL………………………………………………………………………………16 1. PIP Press the up(▲) / down(▼) button to select the PIP. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the On or Off. Press the MENU button to save. 2.
Press the up(▲) / down(▼) button to select the Input Source. 17 …………………………………………………………………………… INSTRUCTION MANUAL Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Input Source. Press the MENU button to save. 3. Size Press the up(▲) / down(▼) button to select the Size.
INSTRUCTION MANUAL………………………………………………………………………………18 Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Size. Press the MENU button to save. 4. Position Press the up(▲) / down(▼) button to select the Position.
19 …………………………………………………………………………… INSTRUCTION MANUAL Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Position. Press the MENU button to save. 5. Swap Press the up(▲) / down(▼) button to select the Swap.
INSTRUCTION MANUAL………………………………………………………………………………20 5. Sound Select Press the up(▲) / down(▼) button to select the Sound Select. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Sound Select. Press the MENU button to save.
21 …………………………………………………………………………… INSTRUCTION MANUAL D. SETUP MENU Press the MENU button and then up(▲) / down(▼) button to select the Setup menu. Press the right(▶) or ENTER button. 1.
Reset: Select to reset all setting to the factory default values. INSTRUCTION MANUAL………………………………………………………………………………22 2. Language Press the up(▲) / down(▼) button to select the Language menu. Press the right(▶) or ENTER button. Press the up(▲) / down(▼) button to select language. Press the MENU button to save.
23 …………………………………………………………………………… INSTRUCTION MANUAL 3. OSD Tone Press the up(▲) / down(▼) button to select the OSD tone menu. Press the right(▶) or ENTER button Press the up(▲) / down(▼) button to select the desire OSD Tone. Press the MENU button to save.
INSTRUCTION MANUAL………………………………………………………………………………24 4. Blue Screen Press the up(▲) / down(▼) button to select the blue screen. Press the right(▶) or ENTER button. Press the up(▲) / down(▼) button to select on or off. Press the MENU button to save.
25 …………………………………………………………………………… INSTRUCTION MANUAL 5. Key Lock Press the up(▲) / down(▼) button to select the key lock menu. Press the right(▶) or ENTER button Press the up(▲) / down(▼) button to select on or off Press the MENU button to save.
INSTRUCTION MANUAL………………………………………………………………………………26 Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation 1.The Monitor fixing bracket to the monitor using the fixing screws provided. 2.
27 …………………………………………………………………………… INSTRUCTION MANUAL ▶ PIN ASSIGNMENTS ▶ ACCESSORY 1. User’s Manual 2. Power Cord 3.
4. VGA Cable INSTRUCTION MANUAL………………………………………………………………………………28 This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
29 …………………………………………………………………………… INSTRUCTION MANUAL 20“ 20.1˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.255(H)X 0.255(V) LCD- Type BRIGHTNESS: 300cd/㎡(Typical) CONTRAST RATIO: 800:1(Typical) VIEWING ANGLE: 178°/178°(H/V) RESPONSE TIME: 16msec(Typical) RESOLUTION (H x V) 1600X1200 @60Hz FREQUENCY HORIZONTAL: 31- 80KHz VERTICAL: 56-75Hz VIDEO(2ch input 1.
▶▶ NOTE : Technical specifications are subject to change without notice. INSTRUCTION MANUAL………………………………………………………………………………30 “Going to Sleep” message on screen WEEE Symbols Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.
31 …………………………………………………………………………… INSTRUCTION MANUAL