Digita_ Palm(ol d_:p Q ......
Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. Please take time to fill in the information below. The serial number is on the tag located on the underside of your Palmcorder. Be sure to retain this manual as your convenient Palmcorder information source. f Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No.
operated. 2. Retain thstmctk:'_s -- The safety and operating in,Jr_.,'Kxionsshould be _'etai_ed for future refereece. 3. Heed Wamings _ Atl wamir_:Js en the unit and i_ the operatinoj instructions should be adhered 40, 4, Fofiowthstruotiens--Alloperattngandmaintenance instructions shou)d be followed, 5. Cleaning -- Unptug this video unif kern the wall outlet before cleaning. Do not use liquid Or aerosol c!eaners, Use a dry cloth tot c)eaeing. 6.
t 5. Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electdo light or power circuits, or where it can fa]t into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power _ines or circuits as contact with them might be fatal. 16.
Things You Should Know ............................................................................................... Important Sateguards .................................................................................................... Precautions ................................................................................................................... Before Using .................................................................................................................. Quick Guide ...
1 pc+ AC Adaptor (PV-DAC 11) with AC Cableand 1 pc+ Lens Cap (LSYF0478) 1 pc. Battery Pack (PV+DBP8A) 1 pc. A/V Cable (LSJA0280) 1 pc. PHOTOVU LLNK Driver (LSFT0251) 1 pc. Shoulder Strap (LSFC0013) DC Cable 1 pc+ PC Connection Cable for Windows (LSJA0276) Microsoft _ and Windows ® are registered other countries. trademarks of Microsoft _ in the United States and Intel ® Pentium ® is a registered trademark. i.LINK and _, are trademarks. PHOTOVU LINK is a registered trademark.
• if the Palmcorder is connected to a power source, the cassette can be inserted and ejected without turning the Palmcorder on, 1TAPE EJECT _,_ 3PUSH TO _% CLOSE mark_:..._-_--_ Connect you the Palmcorder to a Before begin source. (See pages 11, 12.) 1 2 power ] Slide TAPE EJECT to open the Cassette Compartment Cover, insert a cassette record tab up, window side facing out. Press PUSH TO CLOSE mark to close the Cassette Compartment Cover. • To remove the cassette...
Thread the strap ends through the Undo the two strap ends from their Strap Attachment Ring_ buckles. Remove the buckle from one end of the strap. j, Thread the strap (with no buckle) through the Light Holder so that it faces outward. Then, reinsert the buckle. Loosen the strap from the Buckle and create a loop. Reinsert the strap ends through their buckles. • Make sure the straps are not twisted. O Adjust the length of the Hand Strap to the size of your hand as illustrated.
iBefore you begin Charge the Battery, (See page 11 ,)_ Tilt Viewfinder upward. Insert the Battery Pack and slide it down until it locks with a click, • Ii_ ll_k-_ lU _(:.]I iin Set POWER Switch to VCR or CAMERA. 3 Slide TAPE EJECT Switch to open the Cassette Compartment Cover. Insert a cassette record tab up, window side facing out. = Make sure the record tab is closed.
When the LCD monitor is fully open, the Viewfinder automatically turns OFE Adjust the Vision Adjustment Control to your eyesight. Set POWER Switch to CAMERA. 180 ° LCD Monitor Press LCD-OPEN Button to unlock the LCD monitor. Swing it fully open and adjust the angle. Press RECIPAUSE Button to start recording, Press REC/PAUSE to pause recording. Button again __i,_c_hBefore you begin When the LCD monitor is fully open, the Viewfinder automatically turns OFF. arge the Battery. (See page 11.
Connect and plug in the Power Cord as showr_. : POWER Lamp will tight. Remove the DC Cab_e, if attached, from the adaptor. Attach the Battery as shownto POWER Lamp charge. • CHARGE Lamp lights up. It goes out when charging is complete {approx, 1 hour), Expect approx. I hour 30 minutes of operation (EVF usage) when fully charged. CHARG_ Remove the _Battery. Slide the Battery out and then lift up.
Caution: Charge only with specified charger. Charge the Battery within an ambient temperature range of 32 ° F (0 ° C) and 104 ° F (40 ° C). • The Battery may be warm after charging or just after use. This is normal. • Do not use an insufficiently charged or worn out Battery. • If charging is done in extreme low or high temperatures, Battery charge time increases. Safety precautions: • Do not get the Battery near, or dispose of in fire.
-Before T, • ....... m The date and time is calculated, leap year, up to DEC 31 2089. including you begin •Connect the Palmcorder to a power source. (See pages 11, 12.) • Set POWER to CAMERA or VCR. ] J Press MENU to display the Camera or VCR mode menu screen. (See page 14+) 2, 3, 4JOGKEY [CAMERAMENU] [VCRMENU] 1 Button Rotate JOG KEY to select_ _, and then press JOG KEY to display the DISPLAY SETTING menu screen. EXAMPLE: _=r.
The Palmcorder features two menu displays: one for CAMERA mode (recording) and the other for VCR mode (Playback). (See pages 15~18.) • While the Menu screen is displayed, you cannot record on or play a tape. • While recording, the Menu screen cannot be displayed. o During playback, the Menu screen can be displayed. Press MENU to display the CAMERA or VCR menu (according to the POWER Switch setting). Rotate JOG KEY to select a menu item.
._ _ eOFF STROBE MOSAtC SLIM TRAIL STRETCH GAIN-UP I WIPE MIX Pinp MIX _ : PUSH 'EXIT :PUSH JOG KEY MENU KEY I I I ) !,, / e(AUTO) / ...................... twR- NcE __! eAUXO _ _1 I • SET I I _- H. S.S. SET | .
_BEEP eOFF ON eVCRI • SELECT: • SET • EXIT ROTATE : PUSH :PUSH VCR2 JOG JOG MENU OFF ,L_,l,--.-._ _iJ_ I _ C. RESET DATE/TIME _CLOCK-SET _ • SET L'SELECT: ,'EXIT 6 LIN EAR"_ MEMORY eOFF OFF eDfT T. CODE ON .OFF ON : PUSH ROTATE :PUSH JOG JOG MENU I t DATE / KEY KEY KEY, J LCD BRIGHTNESS "_ LOW I I I t --- HIGH 1 LCD COLOR LOWIitl --- HIGH EVF BRIGHTNESS LOW I ] J I --"SET :ROTATE SELECT:PUSH •• EXIT :PUSH J KEY / KEY| KEY.,,/ HIGH JOG JOG MENU 1 | l | REMOTE (See page 26.
- D, EFFECT *SELECT: "SET "EXIT -_ • OFF MIRRO STROBE SUM STRETCH OOFF MOSAIC| TRAIL j l SEPIA l MONO ROTATE JOG : PUSH JOG :PUSH MENU OSP *SET ,EXIT "rt_i_l_e _ AUDIO REMOTE • B, SEARCH : PUSH :PUSH *SET ,.EXIT :PUSH :PUSH REC-SPEED (See page 6.) SP:Normal recording speed mode. LP: Recording time is 1.5 times as long as in the SP mode. For example, 120 minutes of recording is possible on an 80 minute tape. ilNDEX (See page 30.) To select the desired Index Search function.
-SPEED • SET :PUSH JOG • EX|T :PUSH MENU _ r_-:_zr_ l r_ c, RESET DATE/TIME i )SPEED (See page 35.) In Strobe Multi mode, used to select the interval at which a succession of still screens are captured from lhe playback picture. FAST : Every 0.3 seconds NORM : Every 0.6 seconds SLOW : Every 1.0 seconds FAST eNORM SLOW KEY REYJ DISPLAY (See page 19.) To select the desired type of display and counter indication displayed on the LCD Monitor or in 1he viewtinder. .
Here are some of the basic indications which will appear on the Palmcorder Monitor. Only DATE/TIME indications will be recorded onto the tape. IVOLU"E 8 X'i' 'l I 12:34:5 JAN 2 2001 f -L_ ,,,... ..... O Battery Remaining EVF and LCD ,.,# DisplayON/OFF and Counter/Time The indication switches as shownCode below when the desired "DISPLAY" mode is selected from the menu, (See pages 16, 18.) * When OFF is selected, all displays are turned off. LinearTime Counter Memory Counter FULL E.p_ - ,_.
Illl----2: N 2 2001 Volume Display (See page 27.) The volume bar appears when the volume of the bui_t-in speaker is being adjusted. Date and Time Indication (See pages 16, l&) As shown below, the date and time indication changes each time DATEFFIME is selected from the Palmcorder's MENU (see pages 16, 18) or DATE/TIME is pressed on the remote (optional). 12:34:56AM [+1t 1 JAt_ 2 2001 DAT t.E N l Tape Mode Indications REC Recording. PHOTO PhotoShot recording. PAUSE Paused during recording.
The following warning displays appear in the EVF and the LCD monitor. If the Palmcorder is in CAMERA mode without a cassette -,[_. If the Palmcorder is in CAMERA mode with the cassette sliding record tab opened, "_L_j_ will flash and "CHECK REC TAB" will appear for 5 seconds. Recording will not start.
• Remove the lens cap and clip it to the hook. Before you begin Connect the Palmcorder to a power source. (See pages 11, 12,) • Insert a cassette with record lab closed. (See page 6.) 1 t Clip here POWER ZOOM Switch Adjustment Centre1 Set POWER to CAMERA. • The POWER Lamp lights red. • Be sure POWER is fully turned to CAMERA position.
-Before you begin • Connect the Palmcorder 1o a power source. (See pages 11, 12.) • Insert a cassette with record tab closed. The LCD (Liquid Crystal Display) monitor can be used while recording. (See page 6.) 1 2 1LCD-OPEN Button Press LCD-OPEN monitor. to unlock the LCD Swing the LCD monitor fully open and adjust the viewing angle. ° The LCD monitor will automatically turn on. • When the LCD monitor is completely dosed, it will shut off automatically to save power.
Toplayback thefinalfewseconds ofthe lastrecorded sceneintheRECiPAUSE mode. 1EDIT SEARCH Press EDIT SEARCH _ the RECiPAUSE mode. briefly in The [CHK] indication appears. After checking, the Palmcorder returns to the REC/PAUSE mode. • For Recording Check, the Palmcorder must be in the same mode (SP or LP) as was used for recording, otherwise the playback picture is dislorted. You can visuafly search for scenes in CAMERA mode to maintain proper continuity when taping. 1POWER Set POWER to CAMERA.
Youcangodirectly toa blankportion of tapeandstartrecording exactly whereyou lefloff. Set the POWER to VCR. • The POWER Lamp lights red, • Be sure POWER is fully turned to VCR position. Press MENU to display the VCR mode menu screen. 3, 4, 5JOG KEY I 3 Rotate JOG KEY to selectF_ I'_"_-#J_, then press JOG KEY to displz_ythe VCR PLAY MODE menu screen_ Bu_on Rotate JOG KEY to selecl in the VCR PLAY MODE menu. (See page 17,) 1POWER Press JOG KEY to select ON.
Set the POWER to VCR or CAMERA. o The POWER Lamp lights red. • Be sure POWER is fully turned to VCR or CAMERA position. You can control any two Panasonic Palmcorders with one Remote control (Optional, page 49). In order for the remote to distinguish between the two units, it is necessary to set one of the Palmcorders to VCR 2. On the remote, press VCR 1 or VCR 2 to control the desired Palmcorder. Press MENU to display the VCR or CAMERA mode menu screen.
_-Before You can also use the LCD monitor to playback your recording. | | source. (See pages 11, 12.) | insert a recorded cassette. L* Set POWER to VCR. VOLUME KEY 1LCD-OPEN Button you begin Connect the Palmcorder to a power _ \ 1 Press LCD-OPEN 2 monitor and swing open. Press REWIND/SEARCH the tape. to unlock the LCD to rewind Press PLAY to start playback.
t Rapid Visual Search ] A • Sound is muted during all special effects. PLAY Button PAUSE Button g A, A, BREWIND/ BFAST FORWARD/ _PLAY -,11SLOW/ F.ADV Button • When execuling a rapid visual search, the picture may become bluish for an instant or mosaic. This is d"_ c] J.c_"l normal during this D]_'__ mode. SEARCH Button SEARCH Button REWIND/_ SEARCH Button During playback, hold down FAST FORWARDISEARCH or REWIND/ SEARCH. The search will continue for as long as the button is held down.
J Variable • Soundis muted duringa}lspecia} effects. PLAY Button PAUSE Button \ 3JOG KEY Speed Search Press PLA',/to I start playback. Press PLAY again, Rotate JOG KEY to adjust the playback speed. • Rotate JOG KEY downward for forward playback. • Rotate JOG KEY upward for reverse playback. To return to normal playback: Press PLAY. Playback will continue at speed.
Ilndex Forward/Reverse Search Optional Remote Control Only (See page 49) • Sound is muted during all special effects. 4JOG KEY Search for a particular scene by using the electronic index marks placed at the beginning of each recording. Set the POWER to VCR. • The POWER lamp lights red. • Be sure POWER is fully turned to VCR position. Bulon Press MENU to display the VCR mode menu screen. 1POWER Rotate JOG KEY to selectlFJl_l Switch _, then press JOG KEY to display the VCR PLAY MODE menu screen.
[ TV with AUDIO/VIDEO IN Jacks ] Set POWER to CAMERA or VCR, To view what the Palmcorder is recording or to playback a tape on your TV, A/V OUT Turn your TV ON and set it to LINE INPUT or S-VIDEO. Check your TV operating instructions Start playback or begin a recording. -AN Cable (Supplied) To Audio In • Make sure the Paimcorder and TV are turned off while connecting. • Please connect the AN cable securely. for further information.
[ CAMERA This feature helps compensate for any unitentional hand or body movement. It can be used in both the Recording and Playback (VCR) modes. 1, APOWER Switch 3RI_C/PAUSE Button 2, 4, C, D BPLAY Button I Set POWER to CAMERA. 2 [EISON] INORMALJ mode 3 4 • The POWER lamp lights red. • Be sure POWER is fully turned to CAMERA position. Press EIS to stabilize the picture. • Picture flicker may be observed when taping under fluorescent lighting condilions.
[ CAMERA mode ] Set POWER to CAMERA. 3POWER ZOOM Switch 1,A )WER Switch 2 * The POWER lamp lights red. ° Be sure POWER is fully turned to CAMERA position. Press D. ZOOM to select DZOOM1 or D.ZOOM2. once : D.ZOOM1 (from 20X to 40X) twice : D.ZOOM2 (from 20X to 300X) three times : Turn off D.ZOOM 3 3RECtPAUSE Button 2, 4, C, D BPLAY Button D. ZOOM Button 4 Press REC/PAUSE to start recording and press POWER ZOOM to zoom in or zoom out.
Use this feature to record a seven second (approx.) still image from the current camera picture. Audio is also recorded for on-the-spot narration, Or, you can add narration later with the Audio Dubbing feature to make an interesting s_ide show, etc, (See page 41 .) C, Set POWER to CAMERA. The POWER lamp fights red. Be sure POWER is fully turned to CAMERA position. #'t ,! Press PHOTOSHOT in RecordlPause mode.
1 AutoWhiteBalance automaticaUy maintains optimum colorbalance inmost lighting conditions. However, whenusing DigitalFunctions, etc.,youmaygetbetter results usingthemanual adjustment. Set POWER to CAMERA, • The POWER lamp lights red. • Be sure POWER is fully turned to CAMERA position. Press MENU to display the menu screen. Rotate JOG KEY to select_Ir'_, and then press JOG KEY to display the CAMERA ADJUST menu screen.
The Auto Exposure feature can be used to make quality recordings in a variety of scene situations. 4JOG KEY 2MENt Button 1 Set POWER to CAMERA. • The POWER lamp lights red. ° Be sure POWER is fully turned to CAMERA position. 2 3 Press MENU to display the menu screen. Rotate JOG KEY to selectS, and then press JOG KEY to display the CAMERA ADJUST menu screen. Rotate JOG KEY to select 1POWER _L_"_I, then press JOG KEY repeatedly to select one of the live modes shown below.
Use the following features to add interest and professionalism to your recordings or playback. Select from twelve special effects. 3, 4, 5JOGKEY Set POWER to CAMERA or VCR. ° The POWER lamp lights red. , Be sure POWER is fully turned to CAMERA or VCR position. Press MENU to display the menu screen.
f Before you begin Conneol the Palmcorder to a power source. (See pages 11, 12.) You can display a PInP (still image) screen on the Main Picture. J • PinP position is fixed at the bottom right of the screen, Set POWER 4JOG Press MENU to display the menu 3 KEY screen, Rotate JOG KEY to select _, then press JOG KEY to display the CAMERA FUNCTION menu screen. Press JOG KEY repeatedly to select r_. • Press MENU twice to exit this menu. -PHOTOSHOT Button 2MEN_ Button to CAMERA.
The Palmcorder automatically adjusts the focus over lhe entire zoom range. .,all ] Set POWER to CAMERA. Use Manual Focus (MF) when recording ... • The POWER lamp lights red. , asubjectthroughglass. ,, Be sure POWER is fully turned to •a scene wherethe subject isfarfrom the il_ CAMERA position. Palmcerderand thereare objects in theforeground. • a subjectwithdistinct horizontal stripes. _ Press M.
_-Before To record high speed motion (e.g. tennis stroke) for improved STILL or SLOW MOTION playback when watching the tape on this Camcorder. you begin ° Connect the Palmcorder to a power source. (See pages 11, 12.) • Set POWER Switch to CAMERA. • Insert a cassette with record lab. (See page 6.) I Auto Shutter] In the AUTO mode (no indication in the EVF and LCD monitor), the Palmcorder will automatically adjust the shutter speed (up to 1/350).
The original sound can be replaced with new sound using the built-in Palmcorder Turn on the Palmcorder. •Before Insert a pre-recorded you begin tape to be dubbed. The AUDIO-RIEC setting in CAMERA MENU mode should be as fo]lows: 12 bit microphone. Microphone - Built-in I 16 bit The original sound is recorded on ST (Stereo) 1, and the new sound will be recorded on ST (Stereo.) 2. The original sound is replaced with the new sound.
4, 5PAUSE Button Press PAUSE to start Audio Dubbing. • Connect the Palmcorder to the TV in order to monitor the sound. J (See page 31 .) A.ouh To listen to the desired audio sound, set the AUDIO setting of the VCR mode MENU (see page 17) as follows: AUDIO'The following selections are available for 12 bit AUD!O dubbed recordings only (sound recorded in SP mode only). ST 1 ST 2 MIX Only NTSC (National Television Standards Committee) recorded tapes can be audio dubbed.
,-Before Source(Playing) Palmcorder 1 JT TV (Supplied) Cable (not supplied) you begin • Connect both Palmcorder and VCR to their power sources. • Connect the Palmcorder to a VCR as illustrated left. • Turn ON both units. • Set the recording VCR's Input Signal Selector to LINE, • Set the Palmcorder POWER Switch to VCR. 2 (To View) In Video Press PLAY on the Palmcorder. When the tape reaches the point you want to start dubbing, press PAUSE. Place the VCR into RECIPAUSE mode.
-Before High quality digital4o-digital copying can be accomplished if both Palmcorders incorporate the DV Input!Output (i.LINK) Connector (DV interface cable (LLINK) is not supplied). Source (Playing) Palmcorder DV Input/Output 1 2 .LINK) Connector 4 I (O t onal) 6STOP 3, 4 Butt_ 5 3, 4, 5 PAUSE _ 4REC Button 3,4,5 PAUSE Button -3, 4 PLAY Button Insert a blank tape with the record tab closed into the target (recording) Palmcorder and set POWER to VCR.
_,,,,,,,,,,,,,,,,,,,,,, ........ - .......... A live imago can be transferred directly to your PC (Personal Computer) via a DV Interface Cable (i.L/NK) (not supplied) using products and software from a number of editing sottware companies including Digital Origin, Canopus, and Pinnacle. Using Products form these companies allows you to capture and edit live images onto ,our PC using the DV interface (i.LINK).
I',,i-"[O]ll[OltllJ i_m,q IDTLLVL'_L i An image recorded on the DV Tape can be transferred • • • • • IBM PC/AT or compatible Intel ® Pentium ® Processor Microsoft Windows ® 95/98/Me/2000 RAM: 16 MB or more 2 MB minimum available hard disk space • 256 color monitor (full color recommended) • 3.5 inch 1.
Turn your PC (Personal Computer) and start up Windows. Insert PHOTOVU on LINK DRIVER Disk into a floppy disk drive. Click on Start, then "Run..." Type in "a:_etup.exe" and click OK. • If your 3.5 inch floppy disk drive is not "A", use the appropriate letter. Follow the instructions as they appear on the PC screen until the installation is complete. • Setup window will disappear when the installation is complete.
_-Before Pictures captured with the Palmcorder can be transferred to your PC. 1 2 Transfer Operation Button Button you begin • insert a recorded tape. (See page 9.) | • Make Palmcorder-PC connections. | (See page 46.) | • Turn your PC on. | • Set Palmcerder POWER to VCR. J Repeat steps 1 and 2 on page 47 to run the Software. "Preview Window" screen appears. Search and Select video footage or a Still scene you want to transfer to your PC using VCR Operation Buttons on the "Preview window" screen.
PV-DACl AC Adaptor with AC Cable and DC Cable 1 CGR-D08A/1B (Replaces CGRD120A/1 B) $120.00 800mAH/1 h 30 min, Battery Pack $69.95 CGR-D16A/1B _ 1600mAH / 3 h Battery (Replaces CGRD220A/I B) _ Pack $99.95 CGP-D28N1B _ 2800mAH / 5h Battery Pack $129.95 5300mAH / 9 h Battery Pack $229.95 (i.LINK) DV Interface (4-pin to 4-pin)Cable $55.00 CGR-D53A/1K (Replaces CGRD815A!1 B) PV-DDC9 _ PV-DLT9 PV-DRC9 _ _ _ Color Enhancement IR Remote Control Light $39.95 $29.
Please photocopy 1, Palmcorder this form when placing an order. Model # 2, Items Ordered Accessory # Description Price Each Quantity Total Price i Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.SHIPMENTS) C_] VISA [_} Credit Card # MastefCard Expiration Date Discover Customer Signature _ Make Check or Money Order to: PANASONIC ACCESSORIES (Please do not send cash) 4.
A B 1 Turn the Eyepiece counterclockwise 1/8 of a turn. 2 Pull the Eyepiece free. Remove any lint or dust particles with a soft, clean cloth being careful not to scratch the glass surfaces. To re-install the Eyepiece Line up the marks on the Eyepiece with the grooves inside the EVF shaft and attach. Turn it clockwise 1/8 of a turn to lock in place. Your Palmcorder has been designed for normal scene illumination of 150 footcandles (1500 Ix). However, the Palmcorder may be used at F1:1.
Power Source: Palmcorder Power Consumption: Palmcorder: 7.2 V DC 6.5 W (Max. 9.5 W) AC Adaptor: 18 W 1 W (when not in use.) Video Signal: EIA Standard (525 lines, 60 fields) NTSC color signal Video Recording System: Audio: 2 rotary heads, helical scanning system Pick-Up System and Device: Lens: One integral color filter Charge Coupled Device (CCD) Viewfinder: 0.4 inch (t0.2 mm) Electronic Viewfinder : 7.2 V DC (Battery) 7.
Clogged Video Head (a) Video Head Cleaning: Normally, your Paimcorder will not require head cleaning. However, it is possible that the heads may become clogged due to dust in the air, playing damaged tapes, long term use, etc. If "NEED HEAD CLEANING" appears for 5 seconds in the EVF or LCD monitor, the heads may require cleaning. (b) Cleaning the Heads: It is recommended that head cleaning be performed by a qualified service technician. Please contact your nearest Panasonic Servicenter.
If you have a problem with your Palmcorder, it may be something yourself. Check the list below for symptoms and corrections, you can correct No picture in the EVF or LCD Monitor... o Make sure the Power Source is connected. (pp. 11, 12) • Make sure the POWER switch is set to VCR or CAMERA. (pp. 22, 27) • Check the Dew Indicator. (p. 21) • Make sure the Battery is fully charged. (p, 11) • Make sure al) necessary cables are connected correctly and firmly. (p. 12) • Make sure the Lens Cap is removed. (p.
Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. • Please include your proof of purchase. (Failure to due so will delay your repair.) ,rv ce Notice: Requestfor • To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL.
I_ i,v__j D.ZOOM See page 33. EIS Button See page 32. 'E BuHon Seepage 39. A.DUB BuHon See page 41. Lens Remote See page 25. Lens Cap See pages ;HT Button See page 40. MULTI Button See page 35. 8, 22. Built-in Twin Capsule 2-Way Microphone System PHOTOSHOT Button_,_ See page 34. \\ TAPE EJECT_ Switch \ \ _! _" Cassette ........... Compartment Cover See page 7. Hand Strap See page 8. 56 FBuilt-in _Mount _See /_ \ _ _ l_l I_ _}_ _ _E'_ I I ----_ t_ PH '_ _ ! ° '.
JOG KEY pages 13, 14. VOLUME KEY See page 27. M.FOCUS DIAL See page 39. Viewfinder (EVF) See pages 10, 22. Bu_on See page 22. Menu BL See pages 13,14. Strap Attachment Ring See page 8. Bakery Button See pages 11,12, Switch See pages 9, 10. POWER Lamp. See page 22. REC/PAUSE Button See pages 10, 22. Shoulder Stra Attachment Ring See page 8. Vision Adjustment Control See 10. LCD (Liql Crystal Display) Monitor See pages t0, 23, 27. DC IN Terminal See page t2. LCD-C Button See pages 10, 23,27.
PLAY Bu_on See pages 10, 27. PAUSE Button pages 41, 42, 43. CAMERA STILL Button See page 38. STC See pages 10, 27. REC Button See pages 50, 51. REW BuHon See pages 10, 27. (_)EDIT SEARCH Buttor See page 24. FF Button See page 28. EDIT SEARCH Button See page 24. _Tripod Receptacle POWER Lamp See pages 11, 12. AC Power Cable See pages 11, 12. •---- CHARGE Lamp See page 11. DC Output Connector See page 12. 58 CAUTION: ............. This unit will operate on 110/120/220/ 240V AC.
LIGHT RELEASE Buffon See page 7. DATE/TIME Bu_on_ _LIGHT Button See page 7. See pages 20, 25. PHOTOSHOT Button See pages 25, 34. DISPLAY ON TV Bu_on--_ See pages 25, 31. \ See pages 22, 25. A,DUB Button See pages 25, 41. POWER ZOOM Switch See pages22,25. SPKR VOL +/See pages 25, 27. COUNTER/TC Bu_on-----_ See pages t9, 25, RESET Button See pages 25,42. REWIND/SEARCH_-_-_ Button See pages 25, 28. MENU Button ............ See pages 13, 14, 42. REVERSE SLOW/ F. ADV 6utton See pages 25, 28, 29.
Panasonic Division of of America, Secaucus, Consumer Electronics Company, Matsushita Electric Corporation One Panasonic Way New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. AVE. 65 de Infanteria, Km. 9.
1-800-332-5368 (Customer Orders Only) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST) (Visa, Master Card, Discover Card, American Express, Check) Centralized Factory Panasonic MAIL TO " Services Servicenter Company 170SN. Randallnoad, Elgin, tL 60123-7B47 Attention: Please carefully Servicenter.
iAntes de comenzar _ Cargue la batteria. (P&gina 11.) 1 Incline el visor hacia arriba. Coloque la bateria y deslicela hacia abajo hasta que quede bloqueada con un clic. 1 Ajuste el interruptor de alimentacibn (POWER) a la posicldn CAMERA o VCR. Deslice el interruptor de expulsibn de cinta (TAPE EJECT) para abrir la tapa del compartimento del cassette. Introduzca un cassette con la parte de la ventana hacia arriba. ° Asegt_rese de que la len_L_eta de grabaci6n este cerrada. (P&gina 6.
Cuando el monitor LCD se enchuentra totalmente abierto, el visor se DESACTIVA autom_ticamente. Ajuste el control de ajuste de vision segt_n Io desee. Ajuste el interruptor de alimentacidn (POWER) a la 180 ° Monitor LCD 3 Presione el bot6n de apertura del LCD (LCD-OPEN) para des bloquear el monitor LCD, Balanc_e abridndolo completamente y ajuste el dngulo.
A ACAdaptor Accessories (Optional) Accessories (Supplied) A/V Cable Audio/Video Fade In/Out Auto Focus 6, tl, t2, 49 496 Lens Cap Limited Warranty 6,8, 22 60 6, 31, 43 39 39 M Macro Focus Manual Focus Memory Counter MENU OSD 39 39 19 B Backtight Battery Pack Battery Remaining Battery Warning Before Requesting Blank Search Indication Service 40 6, 9, 11, 49 19 21 53, 54 25 C Camera Recording 22, 23, 24, 25 53 Cleaning Care for Video Heads Clock Battery 21 Clock Set 13 Color Enhancement Light (Opti
