Datasheet

PA(D)
2
ds_61C10_en_pa: 131113D
RATING
1. Coil data
1) PA type
2) PAD type
2. Specifications
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. allowable voltage
(at 20C 68F)
4.5V DC
70%V or less of
nominal voltage
(Initial)
5%V or more of
nominal voltage
(Initial)
26.0mA 169
120mW
120%V of
nominal voltage
5V DC 24.0mA 208
6V DC 20.0mA 300
9V DC 13.3mA 675
12V DC 10.0mA 1,200
18V DC 6.7mA 2,700
24V DC 7.5mA 3,200 180mW
24V DC 5.0mA 4,800 120mW
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Nominal operating
current
[10%] (at 20
C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. allowable voltage
(at 20C 68F)
5V DC
70%V or less of
nominal voltage
(Initial)
5%V or more of
nominal voltage
(Initial)
36.0mA 139
180mW
120%V of
nominal voltage
12V DC 15.0mA 800
18V DC 10.0mA 1,800
24V DC 7.5mA 3,200
Characteristics Item
Specifications
PA type PAD type
Contact
Arrangement 1 Form A
Initial contact resistance, max. Max. 30 m (By voltage drop 6 V DC 1A)
Contact material Au-clad AgNi type
Rating
Nominal switching capacity (resistive load) 5 A 250 V AC, 5 A 30 V DC 3 A 250 V AC, 3 A 30 V DC
Max. switching power (resistive load) 1,250 VA, 150 W 750 VA, 90 W
Max. switching voltage 250 V (AC), 110 V (DC)
Max. switching current 5 A 3 A
Nominal operating power 120 mW (5 to 24 V DC), 180 mW (24 V DC) 180 mW
Min. switching capacity (Reference value)
*1
*1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
100A 100mV DC
Electrical
characteristics
Insulation resistance (Initial)
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact and coil 2,000 Vrms for 1min. (Detection current: 10mA.)
Surge breakdown
voltage (Initial)
Between contacts and coil
*2
*2 Wave is standard shock voltage of 1.250s according to JEC-212-1981.
4,000 V
Temperature rise (at 20C 68F)
Max. 45C
(By resistive method, nominal voltage applied to the coil, nominal switching capacity.)
Operate time (at nominal voltage) (at 20C 68F) Max. 10 ms
Release time (at nominal voltage) (at 20C 68F) Max. 5 ms
Mechanical
characteristics
Shock resistance
Functional Min. 147 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
Destructive Min. 980 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 2.5 mm (Detection time: 10s.)
Destructive 10 to 55 Hz at double amplitude of 3.5 mm
Expected life
Mechanical Min. 210
7
(at 180 times/min.)
Electrical
3 A 250 V AC, 30 V DC Min. 110
5
operations (at 20 times/min.)
5 A 250 V AC, 30 V DC Min. 510
4
operations (at 20 times/min.) —
Conditions
Conditions for operation, transport and storage
*3
*3 Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
Ambient temperature: –40C to 70C –40F to 158F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 times/min.
Unit weight Approx. 3 g .15 oz
Notes: