Contents Overview of features . . . . . . . . 5 SIM and battery . . . . . . . . . . . . 6 Quick start . . . . . . . . . . . . . . . . 8 Your phone . . . . . . . . . . . . . . . . 15 Display icons . . . . . . . . . . . . . . 17 Menu structure . . . . . . . . . . . . . 20 Voice calls . . . . . . . . . . . . . . . . 22 Text entry . . . . . . . . . . . . . . . . . 31 Settings . . . . . . . . . . . . . . . . . . . 34 Contacts list . . . . . . . . . . . . . . . 54 Applications . . . . . . . . . . . . . . .
Contents Index . . . . . . . . . . . . . . . . . . . .
Overview of features Your phone has the following features: Bluetooth® connectivity Use this to make and receive calls using wireless Bluetooth® Headsets or Car Kits. Also to transfer data to and from PCs, Laptops, other mobile phones and devices that support Bluetooth®. Contacts list Use this to store phone numbers, e-mail addresses and other details about people, so you can call and mail them quickly. Calculator Use this to perform basic calculations.
SIM and battery SIM and battery SIM and battery Fitting and removing the SIM You insert the SIM into the back of the phone, underneath the battery. If your SIM contains contact details, the first time that you browse your contacts list after fitting a new SIM, you are asked whether you want to transfer the SIM data to your phone.
SIM and battery Charging the battery The battery must be fitted in the phone before you connect the charger. Press the button on the top of the connector and insert it into the base of the phone. Connect the charger to the mains power supply. When the phone is charging, the charging indicator lights and a flashing icon appears in the main display and the case screen.
Quick start Quick start Quick start Note: Some services are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Switching the phone on and off To switch the phone on or off, press and hold c. If you have set an animation and greeting, these are displayed. The phone starts in idle mode.
Taking a picture When you are in camera mode, move the phone around until you can see the image you want on the preview screen. Press Q to capture the image. If you decide that you do not want the image that you have taken, you can press f to delete it. Setting the wallpaper The wallpaper is a picture that displays when the phone is in idle mode. Select Menu > Data Folders. Find a picture. Select Menu > Use As > Wallpaper. Or Select Menu > Settings > Display > Wallpaper.
Quick start Using your browser Quick start Before you can start using your browser, you need to contact your service provider. When your phone is set up to access the Internet see Internet on page 69 for information about using the browser. Creating a mail message Note: Before you use your mailer, see i-mode™ server on page 52 and check that one of the servers has been set. To create a mail message: Select Menu > i-mode > Mail > Create Mail. or From the idle screen, press d > Create Mail.
Creating a multimedia message Note: Before you use your mailer, see i-mode™ server on page 52 and check that one of the servers has been set. To create a multimedia (MMS) message: Select Menu > i-mode > Mail > Create MMS. or From the idle screen, press d > Create MMS. Note: Using d as a shortcut to the Mail menu is dependent on your service provider. Press Q. Select Subject, then press Q to enter a subject. Select To:1, then press Q to enter an address.
Creating a text message Quick start To create a text (SMS) message: Select Menu > SMS > Create, or select Menu > i-mode > SMS > Create, or press and hold c then select Create. Enter your text. Press Q. Select Ok or Cancel. Press Q to send the message. Enter the phone number. Press Q. Select Ok or Cancel. If you selected Ask as your Receipt option, then you are asked ‘Request Delivery Confirmation?’ Press Q, then select No or Yes.
Quick start Finally you need to Pair the devices: On the phone select Discover & Pair. As the phone Discovers devices it displays them on the screen. When the headset name appears in the list you can select Stop to stop the search. If the phone does not Discover your headset, check that your headset is still Discoverable and press d to try again. Highlight the headset in the list. Select Pair. Enter the Bluetooth® Passkey provided with the headset.
Finally you need to Pair the devices: Quick start On the phone select Discover & Pair. As the phone Discovers devices it displays them on the screen. When the car kit name appears in the list you can select Stop to stop the search. If the phone does not Discover your car kit, press d to try again. Highlight the car kit in the list. Select Pair. Enter the Bluetooth® Passkey provided with the car kit. You can select Paired Devices to confirm that the devices are Paired.
Your phone Your phone Ear Piece Main Display Left Soft Key d Use to: Access the i-mode™ mail menu from idle mode. Switch between text entry types. Select the option in the left hand selection area. Navigation Key This is a multi function key. It is represented by Q in the text. Press the edges of this key to move around the display. Right Soft Key f Use to: Access the i-mode™ menu from idle mode. Cancel the current option. Return to the previous menu. Delete last character in text entry.
Your phone Your phone Camera Lens Self-portrait Mirror Memo Key / Camera Shutter Key Case Screen Infrared 16 Personal Handsfree Connector
Display icons Display icons After some operations, the display automatically clears after three seconds or when you press any key. Status icons The status icons are displayed according to the currently activated functions. The antenna, GSM signal strength and battery icons are displayed when the phone is switched on and connected to a network.
Display icons Display icons Y z Registered to a non-home network - Roaming. or / J t N q S 18 The selected line number of the current call when using a SIM that has two lines. This is SIM dependent. M The call you are currently listening to when you are connected to more than one call. Any other calls listed on the display are on hold. This is SIM dependent. M Call divert on. New message received. A flashing envelope indicates that your message store is full. GPRS service available. Antenna.
Display icons X Y Z P mail inbox full mail on server. You may see only one of these icons. Some service providers use all three to indicate the type of mail on the server.
Menu structure Menu structure Menu structure 20 The main menus are as follows: Note: The menus may not display in the same order or with the same icons as listed here. The order and icons vary according to your service provider.
Navigation key The navigation key is a multi-function key. You use the top, bottom, left and right edges to move around the display. These actions are indicated by b, a, d and c in this user guide. You press the centre of the navigation key Q to: z Access the menu system. z Display a submenu. z Select a highlighted menu item. z Confirm a selection. z Select the item in the primary selection area.
Voice calls Voice calls Voice calls Making calls Ensure that the phone is switched on, the network operator logo is displayed, and the antenna and signal strength icons (ST) show that network coverage is available in the current area. From idle mode, enter the area code and phone number. Press e. Ending calls Press c. Answering a call To receive a call the phone must be switched on and the signal strength icon (T) must be displayed. To answer a call, press any key except c.
Making international calls If you know the international number, you can enter it in the normal way, followed by the area code and phone number. You can use the automatic international access code (+), to dial international numbers without knowing the code for the international exchange. From idle mode, press and hold 0 until + is displayed. Use e to scroll through a list of country codes. Select the code you want. Enter the area code and phone number. Press e.
Voice calls Voice calls using Bluetooth® headset or car kit Voice calls Making calls You can use voice dial (see Creating a voice dial entry on page 57 for instructions on how to use voice dial) to make voice calls from your Bluetooth® headset or car kit without pressing any keys on your phone. With some headsets and car kits you can also redial the last number (refer to your headset or car kit instructions for details).
Voice calls Rejecting calls To reject an incoming call: Wait until the headset or car kit rings. Press and hold down the main function key on the EB-BHX70 headset until you hear a low tone, or press the red end button on most car kits. Transferring calls from handset to Bluetooth® headset or car kit If you make a call using your handset, you can transfer the call to your headset or car kit once the call is connected.
Displaying caller ID Voice calls Note: This is network dependent R. If the caller’s number and name are stored in your Contacts List, they can be displayed during an incoming call. Note: Caller ID may not always be available. Setting the ear piece volume During a call press e to adjust the ear piece volume. Note: You can adjust the volume for the personal handsfree, Bluetooth® headset or Bluetooth® car kit accessories in the same way.
Voice calls Making a second call Note: This is network dependent R. If Call Waiting is enabled, you can make a second call. You can check your call waiting status from Settings > Call Service > Calls > Call Waiting. Note: You cannot make more than one fax or data call at a time. You must end all voice calls before you can make or receive a fax or data call. Press d. Select contact number to dial. Select Recall. Press Q. Press e. The first call is put on hold.
Operating during two calls Voice calls Swapping between calls An icon (J) indicates the selected line number of the current call, when connected to two calls. Press Q. Select Swap to change to the other call. Ending current call Press Q. Select End. Ending both calls Press c. Transferring a call When you are connected to two calls, you can connect them together, and end your connections, leaving the two callers to talk to each other. Press Q. Select Trans.
Voice calls Adding people You can add people to the multi-party call (up to a maximum of five), either by making a call or accepting an incoming call. You can then merge the new call into the multi-party. Press Q. Select Merge. Note: When you make a call or accept an incoming call, the multi-party call is placed on hold. The other callers in the multi-party call can continue to talk to each other while on hold from you.
Voice calls Using the notepad Voice calls During a call you can enter numbers that you may want to dial when you have finished the call. You can make a note of these numbers on the notepad. Enter the number. When you have finished your call, press e to dial the number. or Press d while the number is displayed to store the number in your Contacts List. The current call remains active. In call options During a call select Menu to access the following menus: Schedule, Contacts List, and Memo.
Text entry Text entry You use alphanumeric characters to enter details into the Contacts List, to create text and e-mail messages. There are five different text entry modes: normal (ABC or abc), Greek (V), extended alphabet (W), numbers (X) and T9® (T9). To change your text entry mode press d, or select Menu > Input Mode, and select the mode that you want. The icon for the current mode appears in the information area on the display. To change between upper and lower case letters press h.
Text entry T9® Text entry Using T9® reduces the number of key presses required. When in T9® mode: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached. Check that the word has been typed correctly before continuing to the next word. If the combination of letters typed has produced a word which is not the one you require, press e or 0 until the correct word is displayed.
Text entry Cut, copy and paste You can cut, copy and paste text from other messages or contacts list entries on your phone. To cut text: Select Menu > Cut. Move to the start of the text that you want to cut, and select Start. Use f to highlight the text that you want to cut, and select Stop. To copy text: Select Menu > Copy. Move to the start of the text that you want to copy, and select Start. Use f to highlight the text that you want to copy, and select Stop.
Settings Settings Settings Use the Settings menu to personalise your phone. Display Display Wallpaper On/Off Show Brightness Backlight Time Key Backlight Clock/ Calendar Case Screen Operator Notice Setting the wallpaper The wallpaper is a picture that displays when the phone is in idle mode. Select Wallpaper. Select your picture. If your picture is not in the folder press f then select another folder.
Settings Menu > Settings > Display Setting the backlight time The Backlight Time is the time that your screen remains lit when you are not using your phone. Select Backlight Time. Select from 10 seconds, 30 seconds and 60 seconds. Note: Setting the Backlight Time to 60 seconds, can reduce the talk and standby time of your battery. Setting the key backlight The Key Backlight illuminates your phone’s keys. Select Key Backlight. Select On or Off.
Settings Settings Changing the contrast Select Contrast. Use e to move between 0 and 10. Select Ok. Changing the backlight colour You set the backlight colour, to see what type of call you are receiving, or what mode you are in when the phone is closed. You can set the backlight colour for: z Alarm/Schedule z Voice Calls z Fax Calls z Data Calls z SMS z Mail z Voicemail z Camera Mode z Others To set your backlight colours: Select BacklightColour. Select the item you want to change.
Settings Menu > Settings > Alerts Alerts Alerts Ring Volume Ring Type Quiet Mode Vibration Alert Voice Recorder Changing the ring volume You can change the ring volume so that you can hear your phone ring. For example, in a noisy environment you may want to set the volume to maximum. Select Ring Volume. Use e to move between 0 and 4 on the volume scale. You can also have an escalating ring volume which starts quietly and gets louder.
Settings Setting quiet mode Settings In quiet mode the microphone amplifies your voice, so you can whisper and still be heard by the person on the other end of the call. You should use quiet mode in situations where you do not want to disturb the people around you. In quiet mode, the phone does not ring when you receive a call or message, unless you set a ring volume for quiet mode.
Settings Menu > Settings > Keys Keys Keys Keyguard Key Volume Key Tone Answer Key Setting the keyguard The keyguard stops the keypad being accessed. Note: When the keyguard is on, you must turn it off before you can use the phone. Select Keyguard. You are asked ‘Guard Keypad?’. Press Q. You can also set the keyguard directly from the idle screen: Press and hold down Q. Select Keyguard. You are asked ‘Guard Keypad?’. Press Q. To turn off the keyguard: From idle mode press Q.
Settings Phone settings Settings Phone Settings Language DTMF Length All Tones Active Flip Warning Tones Camera Tones User Messages Changing the language You can change the language that the phone uses for display messages and text entry. Select Language. Select DisplayLanguage or Tegic Language. Select the language. Note: Tegic language is the language used by T9® text entry. For more information on T9® text entry, see Entering text on page 32.
Settings Menu > Settings > Clock Selecting camera tones The camera tone is the sound the phone makes when you take a picture. Select Camera Tones. Select a tone type. Editing user messages The phone contains some standard user messages that you can send to other people. You can edit these messages to suit you. Select User Messages. Select the message you want to edit. Edit the message.
Settings Settings Auto adjusting the time difference If you are away, in a country with one time zone, then the time difference can be adjusted automatically. Select Clock Set > Auto Adjustment > On. The phone gets your location from the local network provider, and adjusts the clock automatically. Setting the time difference If you are away, in a country with more than one time zone, then you can set the time difference manually. Select Clock Set > Time Difference.
Settings Menu > Settings > Call service Disabling the power on and off times Select the power on or off time. Select the frequency option. Select Disabled. Press d to save your alarm settings. Or Highlight the power on or off time. Press d to cycle through Repeat Daily, Once or Disabled. Stop at Disabled. Press Q then d to save your alarm settings. Caution: You need to ensure that the times you set do not automatically power on when you are in an aircraft, medical facility etc.
Settings Settings Viewing the combined length of all your outgoing or incoming calls Select Calls > All Calls Timer. Select Incoming or Outgoing. The combined length of all your incoming or outgoing calls since the timer was last reset, is displayed. Once you have seen the total time you can reset the timer: Press Q. You are asked ‘Reset Total Time?’. Press Q. Enter the lock code. Note: The lock code is preset to 0000.
Settings Menu > Settings > Call service Viewing the combined details of your previous connections Select Connections > All Connections. The combined length of all your incoming or outgoing calls since the timer was last reset, is displayed. Once you have seen all the details you can reset the total time and data: Press Q. You are asked ‘Reset Total Time and Data?’. Press Q. Enter the lock code. Note: The lock code is preset to 0000.
Settings Settings Setting the maximum unit level Use this to set the maximum cost of the calls that you can make. Select Service Charges > Max Cost. Select Menu > Edit. Enter your PIN2. Enter the maximum number of units (the corresponding cost is displayed). Note: The duration of one unit may vary during the day at peak and off-peak times. The call charge information may not be an accurate reflection of the tariffs charged by your service provider.
Settings Menu > Settings > Call divert Sending your number Note: This is network dependent R. If your network supports this function, you can decide whether you want your phone number to be sent when you make a call. Note: You must be registered with a service provider before you can choose to send your number. Select Send My Number. Select from Network Set, On and Off. If you select Network Set, your network’s default setting is used.
Settings Security Settings Security Phone Lock Call Bar PIN PIN2 Fixed Dial Barred Dial Setting and cancelling the phone lock Note: You can also set the phone lock by holding down Q on the idle screen, then following the instructions below. When the phone lock is set you can only use the phone to receive incoming calls and to make emergency calls. Select Phone Lock > On/Off > On. Enter the lock code. The lock icon (O) is displayed on the screen.
Settings Menu > Settings > Security Setting and cancelling call bar Call barring restricts certain types of incoming and/or outgoing calls, using a password provided by your service provider. When you check the status of the Call Bar, your phone must be registered with a network. You can set call barring for voice, fax and data calls. Select Call Bar. Select the type of call that you want to bar. Select Set or Cancel. Select when you want to bar the calls.
Settings Enabling and disabling PIN and PIN2 Settings The PIN protects your phone against unauthorised use. If you enable the PIN, you have to enter it every time you turn on the phone. You need PIN2 to set fixed dial numbers. Your PIN and PIN2 are supplied by your service provider. Note: If you enter the PIN or PIN2 incorrectly three times, the phone locks and you need to enter the PUK or PUK2 code. If you enter the PUK or PUK2 code incorrectly ten times, your phone no longer operates.
Settings Menu > Settings > Network Enabling and disabling fixed dial Fixed dial is part of the Contacts List, but with added security. When you enable fixed dial: z You can only dial numbers that are in the fixed dial store z If you manually dial a number, it must match one in the fixed dial store. z If you store, edit or delete a phone number, you have to enter your PIN2. To enable or disable fixed dial: Select Fixed Dial. Select On or Off. Enter your PIN2, provided by your service provider.
Settings Search mode Settings You can set the Search Mode to Automatic or Manual. When the Search Mode is Manual, the phone only uses the selected network. If coverage is lost, you need to select another network. When the Search Mode is Automatic, the phone automatically reselects a new network to maintain network availability. Network list In Automatic Mode, the phone uses the Network List to find a new network. The location numbers in the Network List show the search priority.
Settings Server Setting Settings Profile name What you want to call the server. Defaults are <1>, <2> and <3>. Proxy Port Proxy port setting SSL Port SSL port setting Proxy Host Proxy host setting Portal URL URL for portal Mail URL URL for i-mode™ mail server. MMS URL URL for MMS Server. GPRS Settings Access Point Name User ID User Password Authentication.
Contacts list Contacts list Contacts list Use the Contacts List menu to store a person’s phone numbers, e-mail addresses, company name, picture and other information. You can also set up how your contacts list is organised and displayed. Browse This menu only applies to contacts stored on your phone. For contacts stored on the SIM see SIM on page 60.
Contacts list Menu > Contacts list > Create Create Note: When you create or edit any entries, you must remember to press d to save your changes, or they will be lost. Creating a new contact Select an item. Enter the data using the keypad, or select an item from the list available.
Contacts list Contacts list Note: Location is the location number in your Contacts List. If you put a contact in a group which has a ring type, case screen colour and vibration alert, then these options are not available for the individual contact. Entering DTMF digits in a phone number You can enter DTMF digits at the end of a phone number, so that these numbers are automatically sent after the main phone number. Enter the phone number.
Contacts list Menu > Contacts list > Voice dial Voice dial With voice dial you can save a number using your voice. You can then dial the number by saying the name that you want to call. Creating a voice dial entry Select Voice Dial. Select Add. Select a contact. Select Recall. Select Ok. Hold the phone about 20cm away from your mouth. Speak clearly into the microphone to record the required name.
Contacts list Editing a voice dial entry Contacts list Select Voice Dial. Select an entry. Select from Add, Play and Delete. Add. Add a new Voice Dial entry. Play. Listen to the recording for the selected entry. Delete. Delete the selected entry. Groups From the Groups menu, you can set up groups of contacts. You can use groups to collect together types of entries, for example, business, friends and family. You can give each group a suitable title, for quick access to the entries.
Contacts list Menu > Contacts list > Settings Adding and removing members Once you have created a group, you can add or remove members. To add a new member: Select the group on the list. Select Members from the menu. Select Add. Select a contact from your list. To remove a member: Select the group on the list. Select Members from the menu. Highlight a contact. Select Remove to remove this contact from the group.
Contacts list Enabling and disabling hotkey dialling Contacts list With hotkey dialling, you can press and hold the digit key that relates to a location number to call contacts on your Contacts List. For example, to call the contact in location 3 of your Contacts List, press and hold 3. To enable hotkey dialling, select Hotkey Dialling, then select SIM Phonebook, Mobile Phonebook or Service Dial. Note: The Service Dial option is SIM dependent. To disable hotkey dialling, select Hotkey Dialling > Off.
Contacts list Menu > Contacts list > Storage –> Phone. Copies the details of the current entry to the phone. Profile. Displays the entry’s profile. Creating fixed dial number entries Note: Before you can create a fixed dial number entry, you have to enable Fixed Dial (see Enabling and disabling fixed dial on page 51). Fixed dial is part of the Contacts List, but with added security.
Contacts list Service dial Contacts list Note: This option is SIM dependent. M Your service provider may provide a telephone number for you to access other services. Info numbers Note: This option is SIM dependent. M Your service provider may provide some useful telephone numbers for you to call for services such as directory enquiries. Voicemail Note: This option is SIM dependent. M Before you can use voicemail, you may need to contact your service provider. Select Voicemail. Press Q.
Applications Applications This menu lists the Java™ applications that are available on your phone. To use an application highlight it in the list and press Q. You can have up to 50 Java™ applications on your phone. Note: You download new applications from your service provider’s website, using the i-mode™ browser. From the Applications menu you need to press c to return to the main menu. System menu While the list of Java™ applications is displayed you can press d to get the system menu.
i-mode™ i-mode™ i-mode™ Use the i-mode™ menu to access on-line services such as site (program) connection, mail and Internet services. The following i-mode™ icons can appear on your phone: F i-mode™ connecting, i-mode™ connected Ei-mode™ locked b mail inbox full Xmail on server (MMS) Ymail on server (imail) Zmail on server (both imail and MMS) a unread mail i-Menu This starts the i-mode™ browser.
i-mode™ Menu > i-mode™ > Mail Create Mail To create an e-mail message: Select Mail > Create Mail. or From the idle screen press d > Create Mail. Note: Using d as a shortcut to the Mail menu is dependent on your service provider. Press Q. Select Subject, then press Q to enter a subject. Select To:1, then press Q to enter an address. or Select an address from your Contacts List by pressing d and selecting Open Contacts. You can add To, Cc and Bcc addresses.
i-mode™ i-mode™ User messages You can enter one of the predefined user message in your e-mail message: Select Menu > User Msg. A list of the user defined messages is displayed. Select the message you require. Press Q. To edit a user message, see Editing user messages on page 41. Create MMS Note: Before you use your mailer, see i-mode™ server on page 52 and check that one of the servers has been set. To create a multimedia (MMS) message: Select Menu > i-mode > Mail > Create MMS.
i-mode™ Menu > i-mode™ > Mail To save your message, select Save and press Q, or press d, then select Save. Your message is stored in the Draft so you can send or edit it later. Note: Maximum size of a mail is 50kB or 100kB. (Service provider dependent) Use Preview to preview your slide while you are creating it. Use the options Add Slide, Insert Slide and Remove Slide to arrange the slides in your message. You can set up to 50 slides. Use Text Colour to set the text colour for a particular slide.
i-mode™ SelectableRcv. i-mode™ Use this to receive or delete a mail or MMS message from the server. Note: SelectableRcv. is dependent on your service provider. Check new mail Use this to check to see if you have any new mail. Mail settings Mail Settings Edit Header Quotation Signature Attachment Auto Reception Auto Play Receive Attach. Back Check Settings Edit Header. Use this to insert any text that you want to appear at the beginning of an outgoing message, for example “Dear All”.
i-mode™ Menu > i-mode™ > SMS SMS This accesses the same options as the SMS menu on the main menu. See SMS on page 77 for information on these options. Bookmarks This lists the bookmarks that you have stored. Select a bookmark from the list to go directly to that page. Internet Internet URL History Enter URL Back Enter URL Use this to enter a URL to go to a specific site. URL history This lists the addresses that you have entered and connected to using the Enter URL option.
i-mode™ Show tables i-mode™ Use this to set whether or not to display tables that are contained in a web page. Load images Use this to set whether or not to display images that are contained in a web page. Word wrap Use this to set whether to display text as it appears on the web page or wrap it to fit your phone’s screen. Certificates Use this to set whether or not to confirm certificate for attesting server.
Camera Camera Note: Before you use the camera you should set the date and time. See Setting the clock on page 41. You can take pictures with the built-in camera, and send them in multimedia (MMS) and e-mail messages, or use them as wallpaper. Camera Lens Self-portrait Mirror Camera Shutter Key Changing to camera mode To change to camera mode either select Camera from the main menu, or press and hold the memo key/camera shutter key from idle mode when the phone is closed.
Camera Taking a self-portrait Camera You can take a self-portrait using the shutter button on the side of the phone. Ensure that the phone is in camera mode. Close the phone. View the image in the self-portrait mirror. Press the shutter button on the side of the phone. You can use this image in the same way as any other picture that you take with the camera. Saving a picture When you take a picture, it is automatically given a default name and stored in a data folder.
Camera Editing the picture When you have finished editing the picture, you must press Q to save your changes. Select Edit. Press d When you take a picture then select Edit, the editor reduces the picture to 132 x 176. A warning message: This will reduce the picture size. Continue? appears on the screen, select Ok to continue editing. d Brightness Effect Frame Size Format Trim Changing the brightness Select Brightness. Press c to make it lighter or d to make it darker.
Camera Camera Changing the format Select Format. Choose from JPEG Fine, JPEG Normal and JPEG Economy. JPEG Economy produces a small file but with a low resolution. JPEG Normal produces a file which is acceptable for most uses. JPEG Fine produces a large file with high resolution. Trimming your picture Use this to select and save just a small part of your picture. Select Trim. Use g to increase and decrease the size of the box to include just the part of the picture that you want.
Camera Changing brightness after taking a picture See Changing the brightness on page 73. Preview screen menu Twilight Effect d Frame Format Resolution Capture Mode These are all set up using the same basic method: When the required image is shown in the preview screen, press d. Select the required option. Select the required setting. Press f to leave the menu. Twilight Turn Twilight on when taking pictures in low light conditions.
Camera Resolution Camera With Resolution you can choose the resolution for your image. You can choose from 240 x 320 and 480 x 640. The default is 240 x 320. If you select 480 x 640 then the following options are not available: z Close-up picture: Zoom in and out in preview; z Frame Also: z Multi-shot is available but the picture resolution in this mode is 240 x 320. z The close up icon on the preview is replaced by the VGA icon.
SMS SMS SMS is usually called text messaging. With text messaging you can send and receive text. You can receive, display, edit and send text messages of up to 459 characters to mobile phones on your service provider’s network or any network that has a roaming agreement. The actual number of characters available depends on the language you use. You can only send text messages to phones that have text messaging functionality. Create To create an SMS message.
SMS SMS Replying to a message from a fixed line Select Reply. Enter your message text, and include the fixed line number somewhere in the message. The number can be at any point in your message, but you must enter the number with a hash at the beginning and the end, for example #01234 567890#. Select Send. Inbox N Indicates that you have received a new message. A flashing envelope indicates that your message store is full. Received text messages are stored in your Inbox.
SMS Menu > SMS > Chat SMS Chat SMS With Chat SMS you can read sent and received messages with another party on one screen. Use this to start a call in chat mode. Enter the phone number you want to chat with. To enter a number using the keypad: Enter the number, then select Menu > Ok. To select a number from the contacts list: Press d to go to the Contacts List. Select the contact. Select Recall. Confirm the number, select Menu > Ok. Enter a nickname. This can be up to 18 characters long.
SMS Settings SMS Settings Recipient Group Auto Delete Lifetime Message Centre Receipt Protocol Message centre You must enter the message centre number before you can send text messages. Note: The message centre number may have been pre-programmed on the SIM. Select Message Centre. Enter the message centre number in international dial format (see Making international calls on page 23). Note: The message centre number is provided by your service provider.
SMS Menu > SMS > Broadcasts Auto delete You can set this to automatically delete messages. You select from: Off. Turns off Auto Delete. Received Read. Overwrites the oldest read message. Received Any. Overwrites the oldest read message or the oldest unread message if there are no read messages. Lifetime This is the time that your message is stored at the message centre. The message centre keeps trying to deliver the message until the message is delivered, or the Lifetime expires.
SMS Message list SMS The Message List stores the last broadcast messages that you received. You can delete messages from here. Languages You can change the language for your broadcast messages. Select Language. Select the language from the list.
Data Folders Use Data Folders to store your pictures, sounds and themes. There are three predefined folders for My Pictures, My Sounds and My Themes. These may contain preloaded files. There is a folder called Unknown, where files with an unknown format are stored. There are five empty folders. You can customise any of these folders. The maximum capacity of Data Folders is 5Mb, and it can hold up to 900 files. The maximum file size is 100kB.
Data Folders Editing stored pictures Data Folders From the Edit menu you can change the Brightness, Effect, Frame, Size, Format and Trim of a stored picture. When you have edited the picture, press Q to save your changes. Select the folder where your pictures are stored. Select the picture that you want to edit. Select Edit. Press d. Note: You cannot use this for predefined wallpaper files. For information about these options, see Editing the picture on page 73.
Data Folders Menu > Data Folders > My pictures Copying or moving a picture Select the folder where your pictures are stored. Select the picture that you want to copy or move. Press Q. Select Copy or Move. Select the folder to move or copy to. Note: The default folder is the last one that you copied or moved to. You cannot use this for predefined wallpaper files. You cannot copy barred picture files. Deleting a picture Select the folder where your pictures are stored.
Data Folders Sending a picture via Bluetooth® Data Folders Select the folder where your pictures are stored. Select the picture that you want to send. Press Q. Select Bluetooth. Select the Bluetooth® device from the list of Paired Devices or select Find to Discover another Bluetooth® device. Note: If your phone is not Paired with any other devices, it starts searching for a device automatically. You cannot use this for predefined wallpaper files, or barred picture files.
Data Folders Menu > Data Folders > My sounds My sounds Note: The functions available depend on the type of sound file. Select a sound MMS Play Mail Copy Rename Delete Move Bluetooth Infrared Use As Properties Playing stored sounds Select the folder where your sounds are stored. Select the sound that you want to play. Press d, or press Q and select Play. Sending a sound by mail or MMS Select the folder where your sounds are stored. Select the sound that you want to send.
Data Folders Copying or moving a sound Data Folders Select the folder where your sounds are stored. Select the sound that you want to copy or move. Press Q. Select Copy or Move. Select the folder to move or copy to. Note: The default folder is the last one that you copied or moved to. You cannot use this for polyphonic ring types. You cannot copy barred music files. Deleting a sound Select the folder where your sounds are stored. Select the sound that you want to delete. Press Q.
Data Folders Menu > Data Folders > My sounds Sending a sound via Bluetooth® Select the folder where your sounds are stored. Select the sound that you want to send. Press Q. Select Bluetooth. Select the Bluetooth® device from the list of Paired Devices or select Find to Discover another Bluetooth® device. Note: If your phone is not Paired with any other devices, it starts searching for a device automatically. You cannot use this for polyphonic ring types or barred music files.
Data Folders My themes Data Folders The phone has seven predefined themes. A theme contains a colour scheme. It may also contain a wallpaper and/or a ringtone. You use a theme to change the look and feel of your phone. Note: The seven predefined themes only contain a colour scheme. They set the colours used on your screen. They do not contain a wallpaper or a ringtone.
Data Folders Manipulating folders From the list of folders available, highlight a folder, and press d. Folder Memory Slide Show Delete All Memory Select Memory to display the percentage of memory used and the number of files currently in the folder. Rename Select Rename to rename the folder. Slide show Select Slide Show to display all the images stored in the folder in the order listed as a slide show. Each image displays for five seconds.
Organiser Organiser Organiser The menus are as follows: Synchronization Contacts list 1 2 3 4 1 2 3 4 5 6 7 8 Sync Schedule Sync Contacts Restore Schedule Restore Contacts Calculator Converter Browse Create Voice Dial Groups Settings SIM Storage Service Dial This option is SIM dependent 9 Info Numbers 10 Voicemail Alarm Business Card Schedule 1 View 2 Bluetooth 3 Infrared Memo Receive object 1 Record 2 Playback 3 Delete This option is SIM This option is SIM dependent dependent Connect Sy
Organiser Menu > Organiser > Synchronization Synchronizing your schedule Before you can synchronize your schedule, you have to set up a connection to the external database. Highlight Sync Schedule. Select Edit. Select a connection. Select Menu > Set. You can just send changes to the external database, or send all your records to the external database. To just send changes to the external database: Select Sync Schedule. Select Sync.
Organiser Enter the following information: Organiser Item Length Default Setting Note Profile Name 16 <1> or <2> This is whatever you want to call the connection. Bearer Select not applicable Cable Select Cable to use the USB cable or Infrared to use Infrared transmission. Server Database 128 ./Sch Set according to database name of synchronization server.
Organiser To send all your records to the external database: Menu > Organiser > Synchronization Select Restore Contacts. Select Sync. Note: If you are synchronizing your contacts list for the first time, or there are a large number of changes, then the synchronization may take several minutes. If the message Synchronize all data? is displayed, you need to confirm the synchronization operation.
Organiser Contacts list Organiser This accesses the same options as the Contacts List menu on the main menu. See Contacts list on page 54 for information on these options. Converter Use the converter to convert from/to a home currency using a conversion rate that you enter. Entering an initial conversion rate Select Converter > Edit. Enter your abbreviation for the home currency (maximum three characters). Enter your abbreviation for the foreign currency (maximum three characters).
Organiser Item Menu > Organiser > Business card You can enter the following information: Number of characters First name 16 Last name 16 Home number 40 Work number 40 Mobile number 40 Other number 40 Home mail 80 Work mail 80 Other mail 80 URL 80 Title 16 Company 16 Note 32 Photo Select a picture from the list or take a picture with the camera. Send your details to a Bluetooth® device Select Bluetooth. The phone searches for another Bluetooth® device.
Organiser Schedule Organiser Use the schedule to register reminders for events and for planning holiday periods. Caution: You need to ensure that any settings made in the schedule do not automatically power on the phone when you are in an aircraft, medical facility etc. Creating a reminder Select Menu > Create. Press Q. Enter the start date. Enter the end date. Select the next menu item. Enter the start time. Enter the end time. Select the next menu item.
Organiser Menu > Organiser > Schedule Viewing a reminder Highlight a date. Select View or select Menu > View. Select the reminder. Select Detail. Setting a holiday reminder Select Menu > Options. Select Holiday Set. Select Day or Day of the week. Press and hold f to remove the current date. Enter the new date. Repeat for each day of holiday as required. Note: Dates that you set as holiday dates are shown in red. Deleting holiday reminders Select Menu > Options.
Organiser Calculator Organiser The four function calculator performs simple calculations - addition, subtraction, multiplication and division. Select Calculator. Enter a number (maximum 10 digits). Use g to select the arithmetic operator. Enter another number (maximum 10 digits). If the calculation is complete press d to get the result. If the calculation is not complete, enter numbers and arithmetic operators, until the calculation is complete, then press d to get the result.
Organiser Menu > Organiser > Memo Disabling an alarm Select an existing alarm time. Select the frequency option. Select Disabled. Press d to save your alarm settings. Or Highlight an existing alarm time. Press d to cycle through Repeat Daily, Once or Disabled. Stop at Disabled. Press Q then d to save your alarm settings. Memo Use the Memo to record a two-way conversation during a call, and to use the phone as a voice recorder. You can record up to four memos.
Organiser Playing back a recording Organiser Select Playback. Select a recording. To stop playing press Q twice. Note: You can use the notepad during play back, see Using the notepad on page 30. Volume control during play back While playing back a recording, use e to adjust the volume. Deleting a recording Select Delete. Select the recording. Confirm delete recording. Receive object Note: This option is not displayed if your SIM supports STK.
Connect Connect From the Connect menu you can set up your Bluetooth® and Infrared dialup connections and receive data from other devices. Note: You can access the Connect menu from the top level menu or via the Organiser menu. This is SIM dependent. Your phone can be used as a modem to connect a laptop or desktop PC to the Internet via Bluetooth®, Infrared or USB Data Cable. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website www.panasonicmobile.
Connect Turning Bluetooth® on and off Connect When Bluetooth® is on, the Bluetooth® icon (w) is displayed at the top of the main display. If you leave Bluetooth® on you can make and answer calls using your Bluetooth® headset or car kit, send e-mails and browse websites without pressing any keys on your phone. Note: Leaving Bluetooth® on reduces the phone’s standby time by about 20%. Select On/Off. Select On or Off.
Menu > Connect > Bluetooth® Connect Note: Some manufacturers may use the term PIN, Password or Passcode instead of Passkey. Your phone only supports Passkeys that use numbers not letters. Making the phone Discoverable You can also Pair with another Bluetooth® device by making your phone Discoverable and letting the other Bluetooth® device initiate the Pairing. To make your phone Discoverable: Select Make D’coverable. Select Start. Your phone is Discoverable for five minutes.
Connect Connect Note: If the Make Default option is not available, then this device is already the default device. Viewing your Bluetooth® settings Your Bluetooth® name is the name reported to other Bluetooth® devices when they Pair or exchange data with your phone. By default the name is Panasonic P342i but we recommend that you change it. To view your Bluetooth® name and address select Settings. To edit the name select Menu > Edit. You cannot change your Bluetooth® address.
Connect Menu > Connect > Bluetooth® Connecting your computer to the Internet via Bluetooth® You can use Bluetooth® to connect your computer (laptop, notepad or PC) to your phone without using any cables. Your phone acts as a modem. You can use it to connect your computer to the Internet for web browsing, sending and receiving e-mails and transferring files (FTP). Your Internet connection can be circuit switched (CSD) which gives a connection speed of up to 9.
Connect Select Menu > Connect > Bluetooth > Make D’coverable > Start/Stop > Start. Connect On your computer, run your Bluetooth® application. Select Find Bluetooth Devices. Your computer should Discover your phone. On your computer select Pair, then enter the Passkey (any number from 1 to 16 digits). On your phone enter the same Passkey then select Ok.
Connect Menu > Connect > Bluetooth® Setting your computer’s dial up connection From your web browser: Select Start > Program > Panasonic Data Connection Assistant Select the previously created data connection, then select the Connect option from the File menu. Enter your user name and password and select Connect. Once connected you can: z Browse web sites using your computer’s web browser software, e.g. Internet Explorer. z Send and receive e-mails using your e-mail software application.
Connect Infrared dialup Connect You can use the Infrared connection to transfer information between your phone and another device with an Infrared port. You can also use GSM fax and data services, and you can access the Internet and e-mail via other devices. Preparing for Infrared connection Place your phone and the other device within the effective range of the Infrared connection. Ensure that there are no obstructions between the two devices.
Connect Menu > Connect > Infrared dialup Connecting your computer to the Internet via Infrared You can use Infrared to connect your computer (Laptop, Notepad or PC) to your phone without using any cables. Your phone acts as a modem and it can be used for connecting your computer to the Internet for web browsing, sending/receiving e-mails, and transferring files (FTP).
STK STK STK Note: This option is SIM dependent. M This is the SIM Toolkit menu. If you have this option on your phone, then you need to use the Organiser menu to access the Connect options.
Accessories Accessories Bluetooth® headset (EB-BHX70) You can use a Bluetooth® Headset to make handsfree calls within approximately 10 metres of your phone. Car charger (EB-CDX70) Top up your battery in your vehicle by attaching this to your cigarette lighter socket. Car holder (EB-KAX70) This can be mounted in your vehicle to store your phone. Can be used with car charger and personal handsfree to provide basic in-car handsfree operation.
Accessories Fast travel charger (EB-CAX70UK) Accessories Carry this wherever you go so you can always recharge your battery. Fast travel charger (EB-CAX70EU) Li-Ion battery (EB-BSX73D) Double your talk time by having a spare battery. Personal handsfree (EB-EMD87) Talk and move while keeping your hands free, by using a personal handsfree. Put the ear piece in your ear and the adaptor in the side of the handset, and talk.
Troubleshooting Troubleshooting Please contact your dealer, if any problem persists, or if your problem is not dealt with here. Problem Cause Remedy Phone will not switch on. The network you are using and the condition of the battery can affect battery life. Check that the battery is fully charged and correctly connected to the phone. Short battery life for a new battery. The network you are using and the condition of the battery can affect battery life.
Troubleshooting Troubleshooting Problem Cause Remedy Calls cannot be made. The phone is locked. Enter the lock code to unlock the phone. Outgoing calls are barred Disable the outgoing call barring, or barred dial. The phone is not registered to a network. Move to a coverage area and operate your phone after it has registered with a network. Calls cannot be made from Fixed Dial Store. Calls cannot be received. 116 Check your SIM supports Fixed Dial. Check if the Fixed Dial is switched on.
Troubleshooting Problem Cause Remedy P342i is not Discovered by other Bluetooth® devices P342i is not in Discoverable mode. Put the P342i into Discoverable mode. Call is terminated when closing the phone Active Flip is enabled. Disable Active Flip. Important error messages Area Not Allowed. Roaming in the selected area is not allowed. Network Not Allowed. Roaming with the selected network is not allowed. Security Failure.
Troubleshooting Troubleshooting 118 Verification Failure. On changing the phone lock code, verification of the new code is incorrect – retry changing the lock code with correct verification. Incorrect Lock Code. Disabling or enabling the lock code has failed due to incorrect entry of the lock code – re-enter lock code. Incorrect PIN/PIN2/PUK/ PUK2. The entered code is incorrect – re-enter code correctly. Auto Redial List Full.
Glossary APN Access Point Name. Gateway from GRPS network to other networks, e.g. Internet. Bluetooth® Short range wireless connection for voice and data transfer. CHAP Challenge Handshake Authentication Protocol. A security feature for the GPRS network. CSD Circuit Switched Data. Connection method used by your phone for data services such as web browsing, e-mail and fax. In this mode your phone acts like a dial up modem with a data rate of up to 9.6 kbps.
Glossary Glossary 120 PAP Password Authentication Protocol. A security feature for the GPRS network. Passkey A one to sixteen digit number entered when Pairing Bluetooth® devices. Used as a security measure to prevent unauthorised Pairing. Also known as PIN, Password or Passcode by other manufacturers. Password Used for the control of the Call Bar. Supplied by your service provider. PIN Personal Identification Number used for SIM security. Supplied by your service provider.
Personal settings and notes Use the table below to record your i-mode™ server settings.
Personal settings and notes Notes Personal settings and notes 122
Personal settings and notes The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase.
Personal settings and notes Personal settings and notes 124
Index Active flip . . . . . . . . . . . . . . . . . 40 Adjusting the time difference Automatically . . . . . . . . . . . 42 Manually . . . . . . . . . . . . . . . 42 Alarm Disabling . . . . . . . . . . . . . . 101 Setting . . . . . . . . . . . . . . . . 100 All calls details . . . . . . . . . . . . . 45 Answer key . . . . . . . . . . . . . . . . 39 Answering a call . . . . . . . . . . . . 22 By opening phone . . . . . . . . 40 Handsfree . . . . . . . . . . . . . . 22 Auto answer . . . . . . . . . . . . . .
Index Index Format . . . . . . . . . . . . . . . . . 75 Frame . . . . . . . . . . . . . . . . . 75 Resolution . . . . . . . . . . . . . . 76 Twilight . . . . . . . . . . . . . . . . 75 Camera mode . . . . . . . . . . . . 8, 71 Case screen . . . . . . . . . . . . . . . . 35 Backlight colour . . . . . . . . . 36 Clock . . . . . . . . . . . . . . . . . . 36 Contrast . . . . . . . . . . . . . . . . 36 Orientation . . . . . . . . . . . . . 36 Changing your network . . . . . . 51 Choosing your answer key . . .
Index I Icons . . . . . . . . . . . . . . . . . . . . . 17 Idle screen calendar . . . . . . . . . 35 Image Brightness . . . . . . . . . . . . . . 73 Effects . . . . . . . . . . . . . . . . . 73 Format . . . . . . . . . . . . . . . . . 74 Frame . . . . . . . . . . . . . . . . . 73 Size . . . . . . . . . . . . . . . . . . . 73 Trim . . . . . . . . . . . . . . . . . . 74 Image properties . . . . . . . . . . . . 86 Images as slide show . . . . . . . . 86 i-mode Lock . . . . . . . . . . . . . . . . . .
Index Index Phone lock Cancelling . . . . . . . . . . . . . . 48 Changing the code . . . . . . . . 48 Setting . . . . . . . . . . . . . . . . . 48 Phone off . . . . . . . . . . . . . . . . . . . 8 Phone on . . . . . . . . . . . . . . . . . . . 8 Pictographs . . . . . . . . . . . . . . . . 33 Picture As wallpaper . . . . . . . . . . . . 86 Brightness . . . . . . . . . . . . . . 73 Effects . . . . . . . . . . . . . . . . . 73 Format . . . . . . . . . . . . . . . . . 74 Frame . . . . . . . . . . . . . . . .
Index Sound As a ring type . . . . . . . . . . . Properties . . . . . . . . . . . . . . Speed dialling . . . . . . . . . . . . . . Start up animation . . . . . . . . . . Status icons . . . . . . . . . . . . . . . . Swapping between calls . . . . . . Synchronizing Contacts list . . . . . . . . . . . . Schedule . . . . . . . . . . . . . . . 89 89 60 34 17 28 W Wallpaper . . . . . . . . . . . . 9, 34, 86 Wild numbers . . . . . . . . . . . . . . 56 Withhold ID status . . . . . . . . . . 44 94 93 T T9® . .
