Datasheet

216
EX-20
Slit on one side
Slit on both sides
Slit on one side
Slit on both sides
Slit on one side
Slit on both sides
Slit on one side
Slit on both sides
• Sensing range: 200 mm 7.874 in
•
Min. sensing object: "2.6 mm " 0.102 in
• Sensing range: 40 mm 1.575 in
•
Min. sensing object: "0.5 mm " 0.020 in
• Sensing range: 350 mm 13.780 in
• Min. sensing object: "3 mm
" 0.118 in
• Sensing range: 70 mm 2.756 in
•
Min. sensing object: "0. 5mm " 0.020 in
• Sensing range: 600 mm 23.622 in
•
Min. sensing object: "2.6 mm " 0.102 in
• Sensing range: 300 mm 11.811 in
•
Min. sensing object: 0.53 mm 0.0200.118 in
• Sensing range: 800 mm 31.496 in
• Min. sensing object: "3 mm
" 0.118 in
• Sensing range: 400 mm 15.748 in
•
Min. sensing object: 0.53 mm 0.0200.118 in
Universal sensor
mounting bracket
[For EX-23 only]
Mounting spacer
For front sensing
type sensor only
Sensor checker
(Note)
()
MS-RF21-1
RF-210
RF-11
RF-12
MS-EX20-FS
CHX-SC2
• Ambient temperature:
25 to50 C 13 to122 F
• Ambient humidity:
35 to 85 % RH
Notes:
i
) Keep the tape free from
stress. If it is pressed
too much, its capability
may deteriorate.
Notes:
ii
) Do not cut the tape.
It will deteriorate the
sensing performance.
• Sensing range:
70 to 200 mm
2.756 to 7.874 in
• Sensing range:
60 to 280 mm
2.362 to 11.024 in
• Sensing range: 50 to 400 mm
1.969 to 15.748 in
• Min. sensing object: "30 mm
"1.181 in
Protective mounting bracket for RF-210
It protects the reflector from damage and
maintains alignment.
Reflector
For retroreflective
type sensor only
Reflector
mounting
bracket
Reflective tape
For retroreflective
type sensor only
()
()
OS-EX20-05
Slit size
"0.5 mm 0.020 in
MS-EX20-1
MS-EX20-2
MS-EX20-3
MS-EX20-4
MS-EX20-5
Sensor
mounting
bracket
Round slit mask
For thru-beam type sensor only
Rectangular slit mask
For thru-beam type
sensor only
For front sensing type
For side sensing type
For front sensing type
For side sensing type
Back angled mounting bracket for front sensing type sensor
(The thru-beam type sensor needs two brackets.)
Foot angled mounting bracket for side sensing type sensor
(The thru-beam type sensor needs two brackets.)
L-shaped mounting bracket for front sensing type sensor
(The thru-beam type sensor needs two brackets.)
Back angled mounting bracket for side sensing type sensor
(The thru-beam type sensor needs two brackets.)
It can adjust the height and the angle of the
sensor.
(Two brackets are needed.)
It is used when mounting the front sensing
type from the rear side.
(One set consists of 10 pcs.)
It is useful for beam alignment of thru-beam
type sensors. The optimum receiver position is
given by indicators, as well as an audio signal.
Designation Model No. Description
()
()
()
OS-EX20E-05
Slit size
"0.5 mm 0.020 in
()
OS-EX20-053
Slit size 0.53 mm
0.020
0.118 in
()
OS-EX20E-053
Slit size 0.53 mm
0.020
0.118 in
()
OPTIONS
Round slit mask
Fitted on the front face of the sensor with one-touch.
• OS-EX20-05 • OS-EX20E-05
Rectangular slit mask
Fitted on the front face of the sensor with one-touch.
• OS-EX20-053 • OS-EX20E-053
Sensor mounting bracket
• MS-EX20-1 • MS-EX20-2
• MS-EX20-3 • MS-EX20-4
1.311 in
0.433 in
0.504
in
33.3 mm
11 mm
12.8
mm
1.181 in
0.028 in
0.315 in
30 mm
0.7 mm
8 mm
1.181 in
0.984 in
0.028 in
30 mm
25 mm
0.7 mm
Reflector
• RF-210
Reflective tape
• RF-11 • RF-12
Reflector mounting bracket
• MS-RF21-1
Two M3 (length 12 mm
0.472 in) screws with
washers are attached.
Material: Stainless steel (SUS304)
Two M3 (length 5 mm 0.197 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in)
screws with washers [stainless
steel (SUS304)] are attached.
Material: Stainless steel (SUS304)
Two M3 (length 5 mm 0.197 in)
pan head screws [stainless steel
(SUS304)] are attached.
Material: Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in)
screws with washers [stainless
steel (SUS304)] are attached.
Mounting spacer
Material: Die-cast zinc alloy
360° rotation
Height adjustment:
15 mm 0.591 in
Material: Nylon 6
Universal sensor mounting bracket
• MS-EX20-5
Mounting spacer
• MS-EX20-FS
Sensor checker
• CHX-SC2
Two M3 (length 12 mm 0.472 in)
screws with washers [stainless
steel (SUS304)], one M3 (length
10 mm 0.394 in) hexagon-socket-
head bolt [stainless steel
(SUS304)], and one M3 hexagon
nut [stainless steel (SUS304)] are
attached.
Sensor checker
L
EVE
L
P
O
W
E
R
CHX-SC2
08/2005