Owner's manual

MTS Broadcast/ VHS Hi-Fi Stereo System
i^c
Check list before you begin.
□ The D-VHS VCR is connected to a stereo or Digital TV, or a mono TV and an external stereo amp or receiver with speakers.
D The D-VHS VCR and other components are plugged in and turned on.
Connections
to Make
To monitor recording in progress in
stereo, connect D-VHS VCR to stereo
TV or mono TV and stereo amp with
speakers.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal(s) not being received is enclosed in parenthesis. The currently
selected audio mode is indicated with an arrow.
Press DISPLAY to display the broadcast signal
currently being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select
STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• , If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast. Select SAP audio mode for the
sub language.
MONO broadcast
Normal monaural sound broadcast.
12:00AM CHOa
0:00:00
STEREO ■*
SAP
MONO
12;00AM CHOe
0:00:00
STEREO ■*
(SAP)
MONO
12:00AM CHOB
0;00-.00
(STEREO)
SAP i
MONO
12:00AM CHOe
0:00:00
(STEREO)
(SAP)
MONO
26