Owner's manual

VCFVTV
Selecting the Input Mode
Press INPUT.
The display will change in the order below.
DTV-
c
Channel
Number
U I V------------V
LINE ----- ^
or
Press CH A/T.
The display will change in the order below.
1 — 2—3-----------
c
^LINE'
(CABLE) (TV)
DTV'^ 125 or 69
D
VCR/TV
INPUT
CHANNEL
Up/Down
DTV: For rear audio/video connection of NTSC signal or
digital interface jack with IEEE1394 connection.
When DTV is selected, “d” is displayed in the Multi
Function Display.
LINE: For front audio/video connection.
When LINE is selected, “L” is displayed in the Multi
Function Display.
Record One Program While Watching Another
1 Press VCR/TV while recording is in progress to turn off
the VCR indicator in the Multi Function Display.
2 Use the TV channel controls to select a program. The
VCR will continue to record your program while you
watch any channel you choose.
• To switch back and forth between the recording and viewing
channel, press VCR/TV.
Selecting Channeis at the D-VHS VCR
1 Turn your TV and D-VHS VCR on.
• VCR Indicator lights on the Multi Function Display.
If indicator doesn’t light, press VCR/TV to turn it on.
2 Use CH A/V on the remote control or D-VHS VCR to
select channels.
• To switch back to TV channel selection, press VCR/TV to
turn VCR indicator off, or simply turn the D-VHS VCR power
off.
17