Datasheet

Notes: 1) The model No. with sufx “P” shown on the label afxed to the thru-beam type sensor is the emitter, “D”

shown on the label is the receiver.

(e.g.) Thru-beam type sensor emitter: NX5-M10RP, Thru-beam type sensor receiver: NX5-M10RAD

2) The retroreective type sensor with polarizing lters may not stably detect specular or glossy objects

through transparent lm since light is polarized by the transparent lm.

3) The sensing range and sensing object for the retroreective type sensor is specied for the RF-230 re-

ector. Further, the sensing range is the possible setting range for the reector. The sensor can detect

an object less than 0.1m away.

Reector cannot be

placed in this range.

Actual sensing

range of the sensor

0.1m

Setting range of

the reector

Reector Reector

NX5-RM7□

is 7m

Sensor

4) The sensing range and hysteresis of the diffuse reective type sensor and narrow-view reective type

sensor are specied for white non-glossy paper (200 × 200mm) as the object.

5) If slit masks (optional) are tted, an object as small as 3 × 6mm can be detected.

6) Make sure to conrm detection with an actual sensor before use.

7) By mounting optional interference prevention lter PF-NX5-□, two sensors can be mounted closely.

8) In case the sensor is to be used at an ambient temperature of -15

°C

or less, please contact our ofce.