Datasheet

11
5.
Adjustment
5-1 Light axis adjustment
(thru-beam type NX5-M10R□ / NX5-M30□)
(retroreective type NX5-PRVM5□ / NX5-RM7□)
Thru-beam type NX5-M10R□ / NX5-M30□
1. Place the emitter and the receiver face to face along a
straight line, move the emitter in the up, down, left and
right directions, in order to determine the range of the
light received condition with the help of the operation
indicator (red). Then, set the emitter at the center of
this range.
2. Similarly, adjust for up, down, left and right angular
movement of the emitter.
3. Further, perform the angular adjustment for the receiver
also.
4. Check that the stability indicator (green) lights up.(only
for NX5-M10R□)
Receiver
Emitter
Receiver
Emitter
Sensing object
Operation indicator
(Red)
Stability indicator
(Green)
Retroreective type NX5-PRVM5□ / NX5-RM7□
1. Placing the sensor and the reector face to face along
a straight line, move the reector in the up, down, left
and right directions, in order to determine the range of
the light received condition with the help of the opera-
tion indicator (red). Then, set the reector at the center
of this range.
2. Similarly, adjust for up, down, left and right angular
movement of the reector.
3. Further, perform the angular adjustment for the sensor
also.
4. Check that the stability indicator (green) lights up. (only
for NX5-PRVM5□)
Receiver
Reector
Receiver
Sensing object
Reector
Operation indicator
(red)
Stability indicator
(Green)