Datasheet

17
9-2 Interference prevention lter
(exclusively for thru-beam type sensor NX5-M10R□)
● By mounting interference prevention lters PF-NX5-□, two sets of NX5-M10R□ can be
mounted close together.
However, the sensing range is reduced when the interference prevention is mounted.
● The lters can be mounted by the same method as for the slit masks.
● There are two types of interference prevention lters. The two sets of thru-beam type
sensors should be tted with different types of interference prevention lters.
● The interference prevention does not work even if the lters are mounted for emitters
only, receivers only or the same model No. of the interference prevention filters are
mounted on both the sets of the sensor.
Fitted with
PF-NX5-H
Fitted with
PF-NX5-V
Model No.
Direction of
thru-beam axis
Color of the bracket Sensing distance Min. sensing object
PF-NX5-V Vertical Silver 5m ø20mm
PF-NX5-H Horizontal Light brown 5m ø20mm
Note: The model No. is not shown on the interference prevention lters. Take care when mounting them on the
sensors.