Operating instructions

70
Indications
SP
0:00.00
R0:30
REC
MNL
MF
1
D.ZOOM
NEGA
45k
r
1
2
3
4
5
6
9
7
MOTION SENSOR
8
:
1 Remaining Battery Power
As the remaining battery power decreases, the
indication changes as follows:
[ r] l [ ]. When the battery is
completely discharged, the [6] Indication
flashes.
2 Remaining Tape Time (p. 19)
The remaining tape time is displayed in
minutes. (When it becomes less than 2
minutes, the indication starts to flash.)
≥The displayed remaining tape time may be
shorter than the actual remaining tape time.
Tape Length (p. 19)
230: The Tape Length Indication should be
matched to the tape length of the
inserted cassette (EC30, EC45 or
EC60) to ensure correct indication of
the remaining tape time.
3 Recording Speed Mode (p. 15)
The selected Recording Speed Mode is
displayed.
SP: Standard-play Mode
LP: Long-play Mode
Recording Format (p. 22)
The selected Recording Format Mode is
displayed.
No Indication:Recording was performed in the
VHS format.
: Recording was performed in the
S-VHS format.
S-VHS ET: Recording was performed in the
S-VHS ET format.
4 Super Image Stabilizer (p. 46)
[: When the Super Image
Stabilizer Function is activated,
this indication is displayed.
5 Digital Zoom (p. 46)
D.ZOOM: When the Digital Zoom function
is activated, this indication is
displayed.
Digital Effects (p. 44)
When a digital effect is activated, the
corresponding indication is displayed.
6 Tape movement during recording
7 Tape Run Indications
REC: Recording (p. 22)
PAUSE: Recording Pause (p. 23)
!: Playback (p. 30)/Camera Search in
forward direction (p. 24)
;: Still playback (p. 33)
%: Fast-forward/Cue playback
(p. 30, 32)
&: Rewind/Review playback
(p. 30, 32)
≈: High-Speed Rewinding (p. 30)
CHK: Recording check (p. 24)
STDBY: Motion-Sensor-Controlled
Recording Function Stand-by
Mode (p. 54)
≥When you record with the LCD Monitor facing
forward using the Mirror Mode, only the
Remaining Battery Power Indication, the
Recording Indication [¥] and the Recording
Pause Indication [;¥] appear. If the [°]
Indication appears, turn the LCD Monitor so that
it faces backward and then confirm the displayed
warning code.
8 Zoom Magnification (p. 28, 46)
When you push the [W/T] Zoom Lever up or
down, the Zoom Magnification Indication is
displayed.
9 Motion-Sensor-Controlled Recording Mode
(p. 54)
When the Motion-Sensor-Controlled Recording
Mode is activated, this indication is displayed.
: Tape Counter
The Elapsed Tape Time, Memory Stop
Function Indication is displayed. (p. 69)