Operating instructions

Basic Operations
33
Remarks, etc.
If you leave the Movie Camera in the Still Playback
Mode for about 6 minutes, it automatically switches
over to the Stop Mode. And, if the Movie Camera is
being powered by the Battery, it switches off
completely after a further 6 minutes.
The sound is played back only during normal
playback.
In the Cue, Review and Still Playback Modes,
horizontal noise bars appear in the picture, or the
picture may become black and white or distorted.
The picture reproduced on the LCD Monitor contains
less noise than the picture in the Viewfinder. During
playback on a TV, however, the picture noise is the
same as in the Finder.
The horizontal noise bars have a different pattern in
the SP mode and LP mode.
During Cue or Review Playback, no indications are
displayed on the LCD Monitor.
Search Lock Function
For longer Cue or
Review Playback, press
the [5] Button or the
[6] Button only briefly.
As this locks the search
function, you do not need
to keep the button
pressed for a long time.
To resume normal
playback, press the [1]
Button.
;W.B
;
Still Playback
Press the [;] Button
during Normal Playback.
To return to Normal
Playback, press the [;]
Button again.
Returning to the Auto Tracking Mode
Press [FOCUS/SET] Button for more than 2 seconds
during playback.
The Tracking Adjustment Function is automatically
cancelled when the [TRACKING] Dial is not turned for
5 seconds.
It may not be possible to remove the noise bars
completely.
It is not possible to adjust the tracking when a menu
is displayed.
If you eject the cassette after adjusting the tracking,
the adjusted setting is cancelled.
FOCUS / SET