Contents DVD/CD Player / Video Cassette Recorder NV-VP31EB/EBL (Model suffix: 'EB' for UK model, 'EBL' for Ireland model) Operating Instructions DVD/CD PLAYER OPEN / CLOSE EJECT MUSIC WITH PICTURE AV ENHANCER PULL-OPEN 2.0 DIGITAL OUT NV-VP31 PAL Before connecting the device, operating it or adjusting settings please read these operating instructions completely; especially the safety precautions on pages 3.
Important Safety Warnings ! The moulded three pin mains plug is supplied for your safety and convenience and must NOT be cut off. ! A 5 amp fuse is fitted in the mains plug. If the fuse has to be replaced, it must be of the same rating and approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. To replace the fuse, open the fuse compartment with a screwdriver as shown and replace the fuse and the cover securely. 2 Fuse cover 1.
Caution ! ! ! ! ! ! ! ! ! Inside of product ! ! ! ! Avoid exposing the unit to direct sunlight or other heat sources. Avoid sudden change in temperature or humidity, dew or condensation may form, causing malfunction. Dispose of batteries in accordance with the instructions given in this book. Place the unit on a flat, stable surface. Do not place heavy object on top of the unit.
Included Accessories Included A VHS/DVD TV VOLUME CH AUDIO AV VHS/DVD OUTPUT VHS DVD TRACKING/V-LOCK VIDEO Plus+ INPUT P O REPEAT CANCEL/RESET Check that you have the accessories and items shown INDEX/SKIP ccessories SLOW/ REW SEARCH FF PAUSE/SLOW AC Mains Lead RJA0044-3C Batteries for the Remote Control R6 size RF cable Operating Instructions RQTD0126-B MENU PLAY LIST PROG PLAY DIRECT NAVIGATOR TOP MENU MENU DISPLAY EXIT RETURN PROG/CHECK I-TIMER OFF TIMER REC MODE AV ENHANCER
Remote Remote Control - Codes You may operate television sets with this remote control, by changing its code. Press and hold TV Stand-by. ! Enter your television set’s two-digit code. If the television set does not operate correctly, try entering an alternative code. This set up must be repeated after changing batteries. ! ! Some television set models of the listed manufacturers can not be operated using this remote control.
Front Panel 3 1 2 DVD/CD PLAYER OPEN / CLOSE VCR= Video Cassette Recorder Detailed information is available on the specified pages. EJECT TIMER REC PULL-OPEN REC CH VIDEO L/MONO 1 4 5 6 7 8 EJECT OPEN / CLOSE TIMER REC REC CH JET REW QUICK ERASE AUDIO MUSIC WITH PICTURE AV ENHANCER R AV3 IN NV-VP31 NV-VP31 PAL 45 6 2 3 QUICK JET REW ERASE 2.0 DIGITAL OUT Page 78 VCR Display DVD Display 9 10 11 Device control Standby/on switch /I To eject a video cassette.
Sockets VCR/DVD OUT AUDIO VIDEO DVD OUT ! Connect your external unit (e.g. a video camcorder) with the front panel input. Just seize the L/Mono port for mono INPUT recording of the audio signal. REPEAT Use INPUT to select A3.
Remote control General functions Stand-by/on switch Press to switch the unit from on to stand-by mode or vice versa. In stand-by mode, the unit is still consuming a small amount of power. Switching this appliance into stand-by mode does not disconnect it from the mains. TV functions TV set On/Off switch. VHS/DVD TV VOLUME CH AUDIO TV set AV input selection. TV set volume control. AV Press the button a couple of times to select Sound mode.
Remote control VCR functions VHS/DVD Tape counter The tape counter will be automatically reset to [0:00:00] when you insert a video cassette. ! Or you can press the CANCEL/RESET button on the remote control unit to manually reset the tape counter to [0:00:00]. Finding the start of a recording. TV AV VHS/DVD OUTPUT VHS Plays back programmed recordings. VIDEO Plus+ 24 22 INPUT 1O REPEAT INDEX/SKIP MENU DISPLAY EXIT RETURN PROG/CHECK I-TIMER OFF TIMER REC MODE AV ENHANCER P.
Remote control DVD functions Skip chapters, titles or frames ! Press SKIP during playback or in pause mode. Stop playback ! Press STOP twice. Resume ! Press STOP during playback to store the current position on the disc. ! Press PLAY while [ ] is flashing on the display. Playback will be resumed at the point where you stopped it. Cancel the Resume function ! Press STOP until [ ] is disappears from the display.
Connecting with 21-pin Scart cable (Fully wired) 2 Aerial Follow the steps described below. AV1 21-pin Scart socket RF IN Aerial input ACININ~ AC 1 Ensure TV Power is disconnected from AC Mains socket. VCR / DVD RF IN VCR/DVD OUT VIDEO AUDIO R DVD OUT 2 Connect aerial to the RF IN (Aerial RF OUT AV 2 (DECODER/ EXT) R OPTICAL AV 1 (TV) L DIGITAL AUDIO (PCM/BITSTREAM) L AUDIO input) connector of the VCR/DVD.
Connecting with Audio-Videocable 2 Aerial AUDIO (R/L) / VIDEO Audio / Videooutput AC IN RF IN Aerial input AC IN~ Follow the steps described below. 1 Ensure TV Power is disconnected VCR/DVD from AC Mains socket. RF IN AV 1 (TV) VCR/DVD OUT VIDEO AUDIO DVD OUT R L R L AV 2 (DECODER/ EXT) AUDIO OPTICAL 2 Connect aerial to the RF IN (Aerial RF OUT DIGITAL AUDIO (PCM/BITSTREAM) input) connector of the VCR/DVD.
VCR Auto Setup with 21-pin Scart cable / Audio-Videocable (Automatic tuning) Auto Setup ! ! Tuning : Ch 21 ! EXIT VCR Display Turn on your television set. With the Stand-by/on switch turn on the VCR/DVD. Automatic tuning for all available TV stations begins. Approximate duration is 5 minutes. After Automatic tuning has finished, press EXIT. The Owner ID screen will appear.
Connecting with RF cable You can connect the VCR/DVD to your TV set by using a RF cable. 2 Aerial AC IN RF IN Aerial input AC IN~ VCR/DVD Follow the steps described below. RF IN VCR/DVD OUT VIDEO AUDIO DVD OUT R L R L RF OUT DIGITAL AUDIO (PCM/BITSTREAM) OPTICAL AV 1 (TV) 1 Ensure TV Power is disconnected AV 2 (DECODER/ EXT) AUDIO from AC Mains socket. VIDEO RF OUT Aerial output 2 Connect aerial to the RF IN (Aerial input) connector of the VCR/DVD.
VCR Auto Setup with RF cable (Automatic tuning) Turn on your television set. With the Stand-by/on switch turn on the VCR/DVD. Automatic tuning for all available TV stations begins. Approximate duration is 5 minutes. ! After Automatic tuning has finished, press EXIT. The Owner ID screen will appear. - While Auto Setup is running the first digit of the VCR display will flash. After a while it will stop flashing and the RF output channel number will be displayed.
Connecting to Satellite Receiver, Set Top Box You can connect a Set Top Box to receive digital broadcast by aerial (DVB-T) signals, a satellite receiver (digital/analogue) or a decoder to decrypt encrypted programmes.
Follow the steps described below. 1 Ensure TV Power, External unit Power and VCR/DVD Power are disconnected from AC Mains socket. 2 Connect a 21-pin scart cable (fully wired) to the AV2 21-pin scart socket on the VCR/DVD and to the 21-pin scart socket on the External unit. Connect a 21-pin scart cable (fully wired) to the AV1 21-pin scart socket on the VCR/DVD and to the 21-pin scart socket on the TV set. 3 Connect aerial to the Aerial in connector of the External unit.
DVD-Connectors Before connecting ! Verify that all devices to be connected up are unplugged from the AC mains. VCR/DVD OUT AUDIO VIDEO R DVD OUT R Optical digital audio cable Digital connectors (OPTICAL) OPTICAL Amplifier (example) Prerequisites for making recordings with an external digital recorder - The original disc must not be copy-protected. - The recorder must be able to process signals with a scanning frequency of 48 kHz/16 bit. - You cannot make MP3/WMA recordings.
Checking the Settings after Auto Setup MENU PLAY LIST ! ! MENU Menu Timer recording Tuning Clock set Others :select : exit ENTER ! D : access D EXIT Tuning Manual Auto Setup Shipping condition Owner ID : select : return MENU ENTER EXIT : access : exit EXIT RETURN ! Press the MENU button to display the OSD Main menu on the TV screen. Press to select Tuning then press the ENTER button.
Removing Interference / Changing RF-output channel TV screen The picture with interference In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the VCR/DVD is connected. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove the interference. MENU PLAY LIST ! Press the MENU button for more than 5 seconds. The RF output channel number is displayed on the VCR display.
VCR menu control Timer recording Pos Date Start Stop 27 28 ------- ------------------- ------- / / / / / / ------- --:---:---:---:---:---:-- --:---:---:---:---:---:-- 1/3 PDC - ------------- Tuning Menu Timer recording Tuning Clock set Others 19 The cursor buttons on the remote control unit allow you to navigate through menus and change selected entries. ! Manual Auto Setup Shipping condition Owner ID ! ! Clock set ! With select the entry you would like to change, then confirm with ENTER.
VCR Playback VHS/DVD Normal playback ! Turn on the VCR. ! Be sure the TV set is turned on and tuned to the video playback channel. ! Insert a video cassette. ! Press PLAY to start playback. ! Press STOP to end playback. Playback from power stand-by mode ! When inserting a cassette and pressing PLAY , the device will turn itself on and start playing back. Starting automatic playback ! When inserting a cassette with removed protection tab, playback will start automatically.
Tracking control Adjusting the playback picture Under normal conditions, the VCR automatically adjusts the tracking for optimum performance. However, in some cases it may be necessary to adjust it manually. Playback picture containing noise bars If the picture contains noise bars and it is not clear to see (tracking adjustment): If noise bars appear during normal playback, slow playback or still playback, follow the operations below.
General convenient functions Auto-Start When inserting a cassette the VCR will automatically switch on. Automatic rewinding When a cassette is played to the end, the VCR will automatically rewind it to the beginning of the tape. D This function is not available during programmed recording sessions. SLOW/ Search forward or backwards REW SEARCH FF ! While playing back press or , the search begins. ! When pressing the button twice (JET SEARCH) the search speed increases.
General convenient functions Tape Care Tape Counter When inserting a video cassette the tape counter will automatically reset to [0:00.00]. ! The tape counter may also be reset to [0:00.00] by pressing the CANCEL/RESET button. Automatic shut down and removing cassettes If the VCR is switched into stand-by mode, the cassette may be removed by pressing the EJECT-button. Once done the VCR will switch back to stand-by mode.
Recording Recording functions Instant recording REC Instant recording of the VCR - TV picture. 26 Timer recording Recording controlled by timer. 27 28 Instant recording Set the TV set to the video channel and insert a cassette into the VCR; make sure that the cassette’s protection tab is intact. ! Select channel to record from. ! When recording from an external device, select from Scart inputs AV1, AV2 or Front input AV3. ! Press REC to start recording. ! Press STOP to stop recording.
Timer recording Timer recording Pos 1 2 3 4 5 -- Date BBC1 31/12 BBC2 31/12 ITV 31/12 CH4 31/12 CH5 31/12 - - - - - -/ - :select : delete CANCEL 1/3 PDC Start Stop 10:30 11:30 12:30 13:30 14:30 - -: - ENTER EXIT 11:30 12:30 13:30 14:30 15:30 - -:- - : store : exit SP SP SP SP SP SP ON ON ON ON ON --- The Timer recording allows you to programme the recording time of TV programmes up to 1 month in advance. Use the on-screen menu to programme a maximum of 16 recordings.
Timer recording PROG/CHECK AV ENHANCER Checking the timer programme ! ! Press PROG/CHECK, the Timer recording menu appears. Press PROG/CHECK again or EXIT to quit the menu. Changing or cancelling a timer programme ! ! ! ! PROG/CHECK AV ENHANCER Press PROG/CHECK, the Timer recording menu appears. With select the entry you would like to edit, confirm with ENTER. Modify entries with and confirm with ENTER. Press CANCEL/RESET to delete a recording.
Recording with INTELLIGENT TIMER INTELLIGENT TIMER Pos Date Start Stop 25/10/04 PDC 1 BBC1 25/10 10:30 11:30 SP ON 1 BBC1 25/10 18:3019:30 SP OFF 2 BBC2 25/10 12:30 13:30 A ON Timer recording Pos Date 1 1 ----- BBC1 BBC1 ------------- 1/3 Start Stop I-TIMER P. MEMORY Copying stored recording sessions ! Press I-TIMER. ! With or I-TIMER select recording session. ! Press TIMER to activate the VCR´s timer mode. I-TIMER P. MEMORY Editing a programme ! Press I-TIMER.
Recording with VIDEO Plus+ Video Plus+ 8 3 5 4 2 - - - - Programming recordings with the VIDEO Plus+ function The VIDEO Plus+ code simplifies entering programme information to record TV and SAT programmes. The recording time may be slightly longer than the TV programme. VIDEO Plus+ ! ! ! 0 - 9 :enter : correct : access : exit ENTER EXIT Timer recording Pos 1 1 2 ---- Press VIDEO Plus+. Enter the VIDEO Plus+ number ( to correct entry). Confirm entry with ENTER. The Timer recording screen appears.
Recording with VIDEO Plus+ VIDEO Plus+ Codes for Satellite Receivers / Set Top Box This VCR is not designed to control (switch on or change channel) your satellite receiver or Set Top Box, however, it can be taught to recognise VIDEO Plus+ Codes for Satellite stations. The Satellite Receiver or Set Top Box must be switched on and the correct station selected. Some receivers have their own timer facility for this purpose.
Recording with external recording controls Receiver Aerial TV VCR/DVD AV 1 (TV) VCR/DVD OUT VIDEO AUDIO R L R L AV 2 (DECODER/ EXT) DVD OUT AUDIO VIDEO EXT LINK ZOOM Others Tape length AV2 SQPB OSD VCR/DVD OUTPUT Remote EXT LINK MENU : select : return : : : : : : : AUTO( E-240) NORMAL AUTO 4:3 AUTO VCR 1 2 The following screen will be shown if you select EXT LINK: [2] ! ! D EXIT : exit EXT LINK ZOOM 32 EXT LINK The AV2 input of this VCR is equipped for use with external equipment havi
Manual Functions This VCR has 99 programme positions that can be tuned to receive TV stations. In certain circumstances you may wish to tune in a station manually or rename a TV station.
Manual Functions Changing the name of TV stations Tuning Pos 1 2 3 4 5 Name BBC1 BBC2 ITV CH4 CH5 Ch 22 23 24 25 26 : delete select MENU : return Pos Name Ch 6 30 7 ---- --8 ---- --9 ---- --10 - - - - - - - ! ! ! ! ! : move ENTER : access EXIT : exit A B ! Pos Name Channel NICAM MENU 1 : BBC1 : 22 : AUTO : ! ! ! ! : select : return EXIT ! : exit 1 2 3 4 5 BBC1 BBC2 ITV CH4 CH5 : delete move MENU : return A 34 With select the name entry. The cursor will mark the first letter BBC1.
Manual Functions Creating a new station table Tuning Manual Auto Setup Shipping condition Owner ID ! ! ! ! Press MENU, the Menu screen appears. With select the Tuning menu, confirm with ENTER. With select [Auto Setup], confirm with ENTER. Press ENTER to confirm. OK? ENTER : yes EXIT : no Auto Setup D D Tuning : Ch 1 When no stations have been set, confirm all connections and restart Auto Setup.
Manual Functions Tape length Sets the tape length of the cassette you use. AUTO ( E - 240), E - 195, E - 260, E - 300 AV2 Selects the type of external unit connected to the VCR/DVD's AV2 socket. DECODER: If a decoder is connected. EXT : If another video recorder or satellite receiver is connected. SQPB AUTO ON OFF : The VCR automatically detects the type of recording. : Plays back S-VHS format cassettes in quasi S-VHS format. : Plays back cassettes recorded in VHS format only.
Manual Functions Tuning Owner ID Manual Auto Setup Shipping condition Owner ID ! ! ! ! Owner ID PIN number Name House No Postcode ! : 846* : ************** : *********** : *********** ! ! Use the Numeric buttons or to enter the current PIN number. After entering the correct PIN number, you can change the Name, House No and Postcode. Press ENTER to conclude the setting. Use , the Numeric buttons and ENTER to select and change the desired information. Press EXIT to exit the On Screen Display.
Manual Functions Menu ENTER : access EXIT Datumset Clock / Zeit MANUAL Time Date : 12 : 00 : 00 : 11. 6. 04 Datumset Clock / Zeit AUTO Time Date The clock will normally be set correctly during Auto-Setup however, in some circumstances the VCR cannot set the clock automatically. In this case, follow the operation steps below to manually set the clock. To manually adjust the clock ! Press MENU and select Clock set . ! Press ENTER. ! Confirm that Clock set is set to MANUAL, and press ENTER.
Manual Functions AUDIO Audio mode (L/R) At each press of the AUDIO button, the selected sound output is indicated with L (Left) and R (Right). Stereo playback : Display: LR Left audio channel playback : Display: L Right audio channel playback : Display: - R Playback of normal audio (Mono) sound : Display: - - NICAM sound system The NICAM System is a 2 channel digital sound broadcast system which in most instances provides high quality stereo sound.
DVD-QUICK SETUP VHS Setup QUICK SETUP Select the menu language. English Deutsch Español Svenska to select and press ENTER Français Italiano Português Nederlands RETURN to return The navigator keys of the remote control unit allow you to move between menus and to accept or change the selected settings. Press ENTER to store a change. Press RETURN to go back to the previous screen. Press SETUP to quit the menu. DVD DVD QUICK SETUP may follow VCR Auto Setup.
DVD Playback functions OPEN / CLOSE Playback DVD-Video Video CD CD RAM DVD-A MP3 WMA JPEG Press OPEN/CLOSE on the VCR/DVD to open the disc tray. Place the disc on the disc tray. Press PLAY . The disc tray closes and disc playback starts automatically. D The player may take some time to read all of the disc information! MP3, WMA, JPEG: 48 The Playback menu appears on the screen. Pause playback (still image) ! Press PAUSE during playback. 10 ! ! ! The label must face up.
DVD Playback functions DVD-Video DVD-A Video CD CD RAM MP3 WMA Repeat INPUT REPEAT ! Press REPEAT during playback. You can choose from the following settings, depending on the disc you use: DVD-Video DVD-A DVD-RAM PG DVD-RAM PL VCD/CD WMA/MP3 JPEG D Off Off Off Off Off Off Off Chapter Track Program Scene Track Content Group Title Group All Playlist All Group The repeat function is available only if the disc runtime is displayed during playback.
DVD Playback functions DVD-Video Chapter review This function lets you browse back through the chapters of a DVD-V by playing the first couple of seconds of every chapter. ! Press STOP during playback. ! Press PLAY . A message appears: Press PLAY to Chapter Review. ! Press PLAY again. The first couple of seconds of every chapter are played back. Normal playback is resumed at the point where you stopped it. D Do not press PLAY if you do not wish to browse back through the chapters.
DVD Playback functions PLAY MODE Random playback DVD-Video DVD-A Video CD CD MP3 WMA JPEG All chapters/tracks are played once each in a random order. ! Press PLAY MODE while the disc is stopped. The Program Play screen is displayed. ! Press PLAY MODE again. The Random Playback screen is displayed. ! Press PLAY to start random playback. ! To deactivate the function, stop the disc and press PLAY MODE.
DVD Playback functions Program Play Choose a title and chapter. No. 1 Title Chapter Time Play Clear Clear all --to select and press ENTER PLAY to start Program play DVD-Video DVD-A Video CD CD MP3 WMA You can programme up to 32 chapters/tracks to be played in any order. ! Press PLAY MODE while the disc is stopped. The Program Play screen appears. D Use the numeric keys to specify the Group/Title (not with CDs) and the Content/Chapter.
DVD Playback functions RAM DVD-RAM Direct Navigator ! Direct Navigator ! No. Date On 1 2 9/12 (THU) 9/12 (THU) 16:48 20:00 Title Contents Friends News 0 ~ 9 to select and press ENTER RETURN to exit Your player can play DVD-RAM discs recorded in the video recording format, version 1.1, by a DVD video recorder, DVD video camera, computer etc. To play tracks from a Playlist You can play tracks contained in a Playlist recorded on a MENU DVD video recorder, for example.
VCR-DVD functions D Playing back music, NTSC formatted films or copyprotected discs might result in interferences. Synchronous recording INPUT REPEAT DVD-Video DVD-A RAM Video CD CD MP3 WMA JPEG How to copy a non copy-protected disc to VHS type cassette. ! Select DVD on the remote control. VHS DVD ! Use PLAY and to select the disc's starting position. ! Press to select Pause playback. ! Select VCR on the remote control. VHS DVD ! Press INPUT to select the dc channel.
Navigation Menu MENU PLAY LIST MENU To display the selection menu ! ! D Display the Navigation Menu DISPLAY and press DISPLAY. The Selection menu is displayed. Press to select a menu item, then press ENTER to confirm or RETURN to quit the Selection menu. To display the Navigation Menu with HighMAT Discs, change in the Setup menu in the sub-menu Others the 55 HighMat setting to [Enable]. Or select the [Play as Data Disc] option in the Others menu via DISPLAY, 53 while in Stop mode.
Navigation Menu G 1 Thumbnail Menu JPEG Thumbnail Menu C 1 JPEG --:-- P1000001 1/68 2 3 ! ! ! 4 ! 5 6 7 8 Rotate pictures ! 9 11 10 DISPLAY to display the sub menu RETURN to exit WMA / MP3 / CD-Text Group 12 : Songs 3 ! ! ! JPEG ! Pictures 5 ! Content P1010002 ! Group Date 2004/01/25 Camera DMC-LC20 17:26 Press DISPLAY during playback. The DISPLAY menu will be displayed. The available options depend on the current disc. 52 Press and ENTER to select [Rotate Picture].
HighMAT Page 1/1 Sorted according to artist Sorted according to sampler Sorted according to category HighMAT HighMAT (High Performance Media Access Technology) is a joint Panasonic and Microsoft technology development. Diverse HighMAT-level 2 format data (WMA, MP3 and/or JPEG) stored on a disc by a PC can be quickly played back by the appliance with the additional help of a menu. While the HighMAT menu is displayed: Press to select and ENTER to confirm.
DISPLAY menu Playback status indicator 1 DISPLAY ! ! ! ! DISPLAY DVD-RAM menu illustration Play Speed AV Enhancer Play Menu Picture Menu Audio Menu Display Menu Other Menu ! ! ! Off ! DVD-RAM ! DISPLAY Picture Mode Normal: Factory default Cinema1: Cinema function for viewing in dark rooms. Bright picture areas are dimmed down. Cinema2: Enhances brighter areas of dark scenes. Animation: Intensifies the colours. Dynamic: Brightens up the picture.
DISPLAY menu 52 Menu Title 1/36 Chapter 1/27 Time --:--:-Audio - --Subtitle - --Angle -/Other Settings DVD-Video Menu Track 1/ 2 Time 48:10 Audio LR Other Settings Video CD Menu Playlist 1/ 38 Group 1/20 Content 2/12 Time 0:39 Audio 96kbps Other Settings HighMAT Menu Group 1/11 Content 1/12 Time --:-Audio Other Settings WMA/MP3 Menu Group 1/ 6 Content 1/68 Thumbnail Rotate Picture Slideshow On Other Settings JPEG Menu Track 1/14 Time 48:10 Other Settings CD Title/Track Search: Allows you direc
DISPLAY menu Play Speed: Select a factor by which to change the playback speed. The digital audio output switches to PCM. These settings are not available for every disc. AV-Enhancer: Automatically optimises and adapts the audio and video settings to the disc used. AV ENHANCER The Picture and Audio menus are not available when this function is enabled. Other Settings Play Speed AV Enhancer Play Menu Picture Menu Audio Menu Display Menu Other Menu AV Enhancer Play Menu Off Off x1.4 x1.3 x1.2 x1.
SETUP menus To display the Setup menu ! Press SETUP to display the Setup menu. ! Press to select a sub-menu, then press . ! Press to select the option to be changed, then press ENTER to confirm. ! Press to select a setting option, then press ENTER to confirm. ! Press to select the next menu item. ! Press RETURN to quit the menu.
SETUP menus Menu Audio Dolby Digital / DTS Digital Surround / MPEG: Please choose the correct settings matching your audio system: PCM Digital Output Your equipment Your equipment can not decode can decode the the signal signal Dolby Digital DTS Digital Surround PCM Bitstream PCM Bitstream MPEG PCM Bitstream PCM is the standard method used to record digital music signals on Audio CDs. For reasons of copyright protection, the digital output of PCM audio signals may be limited to 48 kHz/16 bit.
Information Playing DVDs and VCDs The producer of the programme material can define the way in which the disc is played. Consequently, you may sometimes find that, in some cases, you cannot control the playback the way you wish using all of the functions and operations described in these operating instructions. We therefore recommend that you always read the reference material delivered with the disc. Title DiscTop menu Menu TOP MENU Title Menu MENU Title Menu DVD menu Some DVDs have multiple menus.
Information Region codes This player accesses the regional codes stored on DVDs. It supports all discs assigned regional code "2" or "ALL". UK and continental Europe: "2". Disc forms Never play anything but circular discs with a diameter of 3" ( 8 cm ) or 5" ( 12 cm ). Discs of other shapes may damage the player hardware. HighMAT and the HighMAT logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Country codes 58 Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonia Faroese 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guara
Before requesting service GENERAL DISTORTIONS There is no audio output and the sound is distorted: ! ! Check the connections. Deactivate the Advanced Surround effect. The VCR display is not lit: ! Check AC mains connection. The VCR display is lit, the device does not respond to controls: ! Device is set to recording stand-by or timer mode. Quit with TIMER button. ! Error code [U ] or [H ] appears: ! ! 53 H : This is indicative of a malfunction.
Before requesting service VCR DISTORTIONS ! Manual correction of a bad picture: Automatic Clock set doesn’t work properly: Bad picture or sound: The recording functions do not work properly: ! ! ! 38 Set Clock set to [AUTO]. If the device cannot find a TV station transmitting the time signal, set Time and Date manually. ! The use of E-300 cassettes may cause problems if the recordings were taken at low tape speeds LP or EP. Verify that the aerial and/or Scart cables are attached and work properly.
Before requesting service DVD DISTORTIONS The loudspeakers emit loud noise: ! The message "NO PLAY" appears: ! ! ! Go to the Setup screen and check the Audio menu settings of Dolby Digital, DTS Digital Surround and MPEG. The player cannot play discs of the current format. The disc contains no recorded material. The function Ratings is active. ! Check the TV Aspect setting.
21-pin Scart Socket 21-pin Scart Socket 1 3 5 7 9 11 13 15 17 19 21 2 4 6 8 10 12 14 16 18 20 The 21-pin Scart socket transmits both input and output signals for picture and sound. TVs equipped with the same type of socket can be connected here. This type of socket is also called Peritel, Euro Connector and Euro AV.
Specifications Power supply: Power consumption: 220-240 V AC, 50/60 Hz 21W (in operation) Controls multifunctional remote control (VCR, TV and DVD), VCR / DVD, main functions on the unit VCR playback functions PAL and NTSC Playback on PAL TV S-VHS Quasi Playback (SQPB) Video- and Audio heads VCR Recording system VCR tape speed VCR fast forward/fast rewind time Video TV system Video input and output level DVD RGB-Video output RF-converter VCR Horizontal resolution VCR S/N ratio VCR video Input level au
Index A-B Repeat Advanced Surround Angle Audio AUDIO IN/OUT Audio language AV input AV ENHANCER AV2 socket Page 53 18,53 52 55 18 54 26 6,53 8,36 Chapter 43,52 Date DECODER Dialogue Enhancer DIRECT NAVIGATOR Dolby Digital DTS Digital Surround DVD-RAM Erasure protection EXT LINK Field Frame 13,15,38 32,36 53 46 18,55,57 18,55,57 46,47 25 32,36 54 54 Group GUI-Brightness 48,52 53 HighMAT 50,53 INDEX/SKIP INTELLIGENT TIMER JET SEARCH JPEG Page 9,10,24 29 24 47,49,52 Laser Letterbox 3 54 Marker 5
