Operating instructions

ManualsBrandsPanasonic ManualsCar video systemsNVHV61GH

Warning and Important Information 2

Controls and Components 3

Connections 4

Tuning the TV to Your VCR 5

Storing TV Broadcasts in Your VCR 5

Setting the Clock of Your VCR 7

Settings Using the On Screen Display 7

Option Setting 8

Playback 9

Recording 10

Timer Recording 13

Search Functions 15

Before Requesting Service 17

Specifications 18

Video Cassette Recorder

RQTV0006

Operating Instructions

使用說明書

Before attempting to connect, operate or adjust this product,

please read these instructions completel

Contents Page

Model No.

NV-HV61GH

NV-HV61GH.book 1 ページ２００４年３月４日　木曜日　午前９時１３分

Summary of content (18 pages)

PAGE 1
NV-HV61GH.book 1 ページ２００４年３月４日木曜日午前９時１３分 Operating Instructions 使用說明書 Video Cassette Recorder Model No.
PAGE 2
NV-HV61GH.book 2 ページ２００４年３月４日木曜日午前９時１３分 Longrun Head System Warning and Important Information This longrun head system enables approximately 8,000 hours of recording/playback in high quality images. Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging. Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency. • Based on in-house tests with Panasonic video cassettes.
PAGE 3
NV-HV61GH.
PAGE 4
NV-HV61GH.book 4 ページ２００４年３月４日木曜日午前９時１３分 Setting the Remote Control to Operate Your TV Connections You can operate the TVs of the manufacturers listed below with the remote control after setting it. This section shows you how to connect the VCR to an aerial, TV, etc. This setting procedure allows you to operate the TVs of some manufacturers using the supplied remote control.
PAGE 5
NV-HV61GH.book 5 ページ２００４年３月４日木曜日午前９時１３分 Tuning the TV to Your VCR Storing TV Broadcasts in Your VCR The VCR supplies a signal to the TV via the RF coaxial cable on channel E21-E69. If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the procedure below. To view the pictures from the VCR, set to the AV mode on the TV with [AV] (2).
PAGE 6
NV-HV61GH.book 6 ページ２００４年３月４日木曜日午前９時１３分 Auto Tuning Using the On Screen Display Manual Tuning Procedure Introduction The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary. If the VCR is not correctly tuned by Auto Tuning, follow the procedure below. Preparations • Confirm that the TV is on and the VCR viewing channel is selected.
PAGE 7
NV-HV61GH.book 7 ページ２００４年３月４日木曜日午前９時１３分 Setting the Clock of Your VCR Settings Using the On Screen Display In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock back up in the event of a power failure can only be guaranteed for maximum of 1 hour. Preparations • Confirm that the TV is on and the VCR viewing channel is selected. • Turn on the VCR. Preparations • Confirm that the TV is on and the VCR viewing channel is selected.
PAGE 8
NV-HV61GH.book 8 ページ２００４年３月４日木曜日午前９時１３分 4 Tape running display Option Setting Stop, Eject Rewind, Review, Index Search:, Jet Search6, Jet Rewind 6 Fast Forward, Cue, Index Search 9, Jet Search 5 5 Playback 1 Recording ¥ Recording pause ;¥ Repeat playback R1 MENU CLOCK SET TUNER PRESET SYSTEM OPTION TAPE REFRESH NAVI MEMORY 0PROG. SELECT : , ENTER END : MENU Present time 17:24 Tape counter 0:02.
PAGE 9
NV-HV61GH.book 9 ページ２００４年３月４日木曜日午前９時１３分 OSD REC: To set the conditions for the OSD Recording function. • Press [2 1] (28) to select [ON] or [OFF]. OFF: ON: Playback Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a recorded video cassette. Initially set at this position. This setting enables OSD Recording. (See page 11.) If you select [ON], [JET NAVIGATOR] is set to [OFF] automatically. For Normal Playback: Press [PLAY] (8).
PAGE 10
NV-HV61GH.book 10 ページ２００４年３月４日木曜日午前９時１３分 To Play back S-VHS Cassette Tape (SQPB=S-VHS Quasi Playback) Recording It is also possible to play back tapes recorded in the S-VHS system. • Some picture noise may occur depending on the type of tape used. • It is not possible to fully obtain the high resolution that SVHS is capable of. • It is not possible to record in the S-VHS system with this VCR. Preparations • Confirm that the VCR is on.
PAGE 11
NV-HV61GH.book 11 ページ２００４年３月４日木曜日午前９時１３分 To Display the Approximate Remaining Tape Time Important Note for the NICAM System When The VCR is switched on, the tuner will automatically switch to a NICAM broadcast, if NICAM is being transmitted. At this time the NICAM signal is transmitted on stereo channels only, since the M1 and M2 formats are not yet available. Even if the sound track is MONO, the stereo indicator will appear. The remaining tape time can be displayed in the VCR display.
PAGE 12
NV-HV61GH.book 12 ページ２００４年３月４日木曜日午前９時１３分 Recording from an external source Operations 1 Press [PLAY] (8) to start playback. This function can be used to make up an edited tape from other recordings or video sources. A new scene can be added to the end of previous one. 2 At the point where you want to join a new scene, press [PAUSE/SLOW] (29) to put it in the still playback mode. Recording VCR 3 Press [REC] (15) to put it in the recording pause mode.
PAGE 13
NV-HV61GH.book 13 ページ２００４年３月４日木曜日午前９時１３分 9 Press [TIMER (REC)] (14) to switch the VCR over to the timer recording standby mode. • When [JET NAVIGATOR] is set to [ON] (see page 8), the [PROGRAMME IS COMPLETE. REMAINING PROGRAMME 49.]* message appears. • When [JET NAVIGATOR] is set to [OFF] (see page 8), the [PROGRAMME IS COMPLETE.]* message appears. * These messages will not appear if timer recording is started immediately after [TIMER (REC)] (14) is pressed.
PAGE 14
NV-HV61GH.book 14 ページ２００４年３月４日木曜日午前９時１３分 Setting other Programmes in Succession Timer recording for the same programme on the next week (Intelligent Timer) Repeat steps 1-9 of Easy Timer Programming (page 13). When you wish to set the timer recording for programmes which will be recorded within 1 week and you have ever recorded the programmes before, you can record them soon with I-TIMER function without entering day and time by buttons.
PAGE 15
NV-HV61GH.book 15 ページ２００４年３月４日木曜日午前９時１３分 To Delete the Jet Navigator Data of a Single Video Cassette Tape Search Functions Keep [CANCEL] (5) pressed for more than 5 seconds while the Jet Navigator list appears. [ss] appears on the list. See page 8 to delete all the Jet Navigator data stored in the VCR memory. Jet Navigator This VCR can display a list of the recorded programmes on the inserted video cassette on the TV screen.
PAGE 16
NV-HV61GH.book 16 ページ２００４年３月４日木曜日午前９時１３分 To Demonstrate the Jet Navigator Function Keep [NAVI] (25) pressed for more than 5 seconds without inserting a cassette tape. Notes: • Searching in either direction is possible up to the 20th index signal. • If you press either of [INDEX] (13) too many times, simply press the other [INDEX] (13) (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.
PAGE 17
NV-HV61GH.book 17 ページ２００４年３月４日木曜日午前９時１３分 • The playback picture is distorted when record the tape in the EP mode using MESECAM system. #However, this is not a malfunction. #We recommend PAL system for recording in the EP mode. Recording will not operate correctly The symptom description is indicated in brackets [ ]. Before Requesting Service Message of On Screen Display The error message is indicated in brackets [ ]. [PLEASE PUT IN A VIDEO CASSETTE.
PAGE 18
NV-HV61GH.book 18 ページ２００４年３月４日木曜日午前９時１３分 During still playback, keep [TRACKING/V-LOCK] (20) _ or ` pressed until the picture stops shaking. Crystal View Control The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. Precautions: • With certain TV models and tapes, it may not be possible to adjust the tracking.