Operating instructions

ManualsBrandsPanasonic ManualsCamcordersNVGS70

CARD Mode

-41-

CARD Mode

Using a Card

A Card can be used to record still pictures.

≥Use genuine Card only.

ª Inserting a Card

Before inserting a Card, be sure to turn off the

Movie Camera.

1 Slide the [OPEN] Lever (7) to open the Card

Slot Cover

(5).

2 While holding the Memory Card with its cut

corner on top 1, insert it into the Card Slot.

3 Close the Card Slot Cover (5) securely.

Removing the Card

Open the Card Slot Cover and then pull it straight

out.

≥After removing the Card, close the Card Slot

Cover.

ª [ACCESS] Lamp (4)

While the Movie Camera is making an access to

the Card (reading, recording, playback, erasing or

moving of images), the [ACCESS] Lamp lights

up.

≥While the [ACCESS] Lamp is on, never attempt

to open the Card Slot Cover, to pull out the

Card, to turn off the Movie Camera, or to switch

the [TAPE/CARD/CARD MODE] Selector. Such

actions will damage the Card, cause loss of

recorded data and cause the Movie Camera to

malfunction.

OPEN

(7)

(5)

ACCESS

(4)

Recording on a Card

3 kinds of data can be recorded by selecting with

the [TAPE/CARD/CARD MODE] Selector

(35).

When recording picture, slide the

[TAPE/CARD/CARD MODE] Selector until the

[PICTURE] Indication 1 appears (Card

Photoshot), when recording moving picture, slide

the [TAPE/CARD/CARD MODE] Selector until

the [MPEG4] Indication 2 appears (MPEG4

Recording), when recording voice, slide the

[TAPE/CARD/CARD MODE] Selector until the

[VOICE] Indication 3 appears (Voice Recording).

≥If the [TAPE/CARD/CARD MODE] Selector

(35)

is set to [CARD] with a Card inserted, the Movie

Camera is automatically turned off when you

leave it for about 6 minutes without performing

any recording.

≥When the [TAPE/CARD/CARD MODE] Selector

(35) is set to [CARD], you cannot record to the

Tape.

ª Card Photoshot

Still pictures can be recorded on the Memory

Card from the Movie Camera lens as well as from

scenes that have already been recorded on a

cassette.

The size of images that are recorded using this

Movie Camera is approximately 1.7 million pixels,

and recording of images with a size that is larger

than a million pixels is called mega-pixel

still-picture recording. Compared to images of

normal recording, images that are created by

mega-pixel still-picture recording can be printed

out clear.

PICTURE

MPEG4

VOICE

TA P E

CARD

MODE

(35)

70B-ENG.book 41 ページ２００３年３月２７日　木曜日　午前１１時５３分

Summary of content (20 pages)

PAGE 1
70B-ENG.book 41 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode Recording on a Card CARD Mode 3 kinds of data can be recorded by selecting with the [TAPE/CARD/CARD MODE] Selector (35).
PAGE 2
70B-ENG.book 42 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 3 Start playback and set the Movie Camera to Recording from the Movie Camera Lens (CAMERA Mode) 1 Set the [TAPE/CARD/CARD MODE] Selector (35) to [CARD]. Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button (25). PHOTO SHOT (35) TAPE CARD CARD MODE (25) 2 Slide the [TAPE/CARD/CARD MODE] Selector (35) to [CARD MODE] until the [PICTURE] Indication appears.
PAGE 3
70B-ENG.book 43 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode ª Card Continuous Photoshot The still pictures can be recorded on a Card at a regular intervals. ≥Available only with [640k480] picture size. 1 Set the [TAPE/CARD/CARD MODE] Selector (35) to [CARD]. (35) TAPE CARD CARD MODE ª Automatically Copying Still Pictures That Have Already Been Recorded on a Tape The images with the Photo Index signals are automatically recorded to the Card.
PAGE 4
70B-ENG.book 44 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode ª Recording a Moving Picture (MPEG4) You can record moving pictures for e-mailing on a Card. The recorded data can be also played back on Windows Media Player. Recording from a Cassette (VCR Mode) 1 Set the [TAPE/CARD/CARD MODE] Selector (35) to [CARD]. Recording from the Movie Camera Lens (Camera Mode) 1 Set the [TAPE/CARD/CARD MODE] Selector (35) to [CARD].
PAGE 5
70B-ENG.book 45 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 3 Press the Recording Start/Stop Button (48). (48) ≥Voice from built-in microphone is recorded. ≥It takes 2 to 3 seconds to start recording. ≥The recorded file is automatically locked (to prevent accidental erasure). ≥Voice from external microphone connected to the [MIC] Socket can also be recorded. ≥During recording, the [ VOICE ] Indication is lit in red. ≥When Remaining Time Indication becomes [R:0h00m], this Indication flashes in red.
PAGE 6
70B-ENG.book 46 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode ≥When [MPEG4] or [VOICE] Indication appears at step 2, during playback, keep pressing [PUSH] Dial until the volume Indication appears and turn it to adjust the volume. (-33-) 1 3 Press the [MULTI] Button (15). (15) MULTI/ P-IN-P 1 MPEG4 ≥The files recorded on the Card are displayed in Multi-Picture Mode. 100-0001 2 2 PICTURE 3 3 640 640 640 640 640 VOICE No.
PAGE 7
0B-ENG.book 47 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 2 Turn the [PUSH] Dial (28) and select the desired file number, and press the [PUSH] Dial (28). To Copy All the Pictures 1 Slide the [TAPE/CARD/CARD MODE] Selector (35) to [CARD MODE] until the [PICTURE] Indication appears. ≥For other notes concerning this item, see -64-. Recording Pictures on a Card to a Tape Card Images can be recorded on the Tape one at a time or all automatically.
PAGE 8
70B-ENG.book 48 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 3 Press the [1] Button (9). 4 Turn the [PUSH] Dial (28) to adjust the (9) BACK LIGHT ≥The [SLIDE!] Indication is displayed. SLIDE ≥All of the pictures are played back for several seconds each. To Pause the Slide Show Press the [;] Button. ≥The [SLIDE;] Indication is displayed. playback time and press the dial. ≥Playback Time (Second) Indication 2 ≥The [¥] Indication 3 is displayed to the picture set.
PAGE 9
70B-ENG.book 49 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode To Reset the Slide Show Setup Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [RESET] >> [YES] >> [YES]. ≥Slide Show settings are reset. ≥For other notes concerning this item, see -65-. Creating a Title You can create a title and record on a Card. 1 Camera Mode: Slide the [TAPE/CARD/CARD MODE] Selector (35) to [CARD MODE] until [PICTURE] Indication appears first. Set the Lens to the image you want to use for creating a title.
PAGE 10
70B-ENG.book 50 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 3 Turn the [PUSH] Dial (28) to select a desired 2 Set [CARD FUNCTIONS] >> title. [CARD EDITING] >> [DPOF SETTING] >> [YES] >> [VARIABLE]. WB/SHUTTER/ IRIS/VOL/JOG (46) (28) WB/SHUTTER/ IRIS/VOL/JOG PUSH (28) MENU PUSH ≥The selected title is marked with a frame. 4 Press the [PUSH] Dial (28) or press the DPOF SETTING (PRINT QUANTITY) [MULTI] Button (15). ≥The selected title is displayed.
PAGE 11
70B-ENG.book 51 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode 2 Select [PICTURE] or [TITLE]. FILE 4 Press the [PHOTO SHOT] Button (25). LOCK PHOTO SHOT 640 640 640 640 640 640 PRESS MENU TO (25) 1 EXIT 3 Select the file to be locked, and press the [PUSH] Dial (28). ≥The selected file is locked and the [ ] Indication 1 is attached. Repeat this procedure to lock 2 or more. ≥Files recorded by Voice Recording Function is automatically locked (to prevent accidental erasure).
PAGE 12
70B-ENG.book 52 ページ２００３年３月２７日木曜日午前１１時５３分 CARD Mode Formatting a Card If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card. 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD FORMAT] >> [YES]. (46) (28) WB/SHUTTER/ IRIS/VOL/JOG MENU PUSH ≥Since a confirmation message appears, select [YES] and formatting will be carried out.
PAGE 13
70B-ENG.book 53 ページ２００３年３月２７日木曜日午前１１時５３分 With a PC With a PC 3 Connect the supplied USB Cable to [ ] Socket (29). USB Connection Kit Using the supplied USB Connection Kit, you can import still pictures into your personal computer. ≥Do not connect the USB Cable until the USB driver is installed. 1 Install the supplied USB driver. 2 Set the Movie Camera to Card Playback Mode. 3 Set the Movie Camera to Still Playback Mode. 4 Connect the supplied USB Cable to [ ] Socket (29).
PAGE 14
70B-ENG.book 54 ページ２００３年３月２７日木曜日午前１１時５３分 With a PC ≥Moving Picture format (MPEG4) that can be played back on this device is ASF. (Depending on the file, it may not be able to be played back even if it is in ASF format.) Constructing a Folder when the Card is used with a PC ≥When a Card with data recorded on it is inserted into a personal computer, folders will be displayed as in the figure. SD Memory Card: MultiMediaCard: [100CDPFP]: The images (IMGA0001.JPG, etc.
PAGE 15
70B-ENG.book 55 ページ２００３年３月２７日木曜日午前１１時５３分 Others Others Indications Various functions and the Movie Camera status are shown on the screen. r: Remaining Battery Power ≥When the battery power becomes low, the Indication changes. When the battery is discharged completely, the u (v) Indication flashes. R0:45: Remaining Tape Time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) CINEMA: Cinema Mode -26D.
PAGE 16
70B-ENG.book 56 ページ２００３年３月２７日木曜日午前１１時５３分 Others N (F, E): ª To Change the Counter Display Mode Card Photoshot Picture Quality (during Card Photoshot recording) [F] means Fine, [N] means Normal and [E] means Economy. By changing [C.DISPLAY] on the [DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00.00), Memory Counter Indication [MEMORY] (M0:00.00), and Time Code Indication [TIMECODE] (0h00m00s00f).
PAGE 17
70B-ENG.book 57 ページ２００３年３月２７日木曜日午前１１時５３分 Others To Correct the Contents If Owner ID has already been set, carrying out Step 1 will display [INPUT PIN NUMBER] on the screen. Input the Pin Number you have already selected. If the number is not correct, the screen will not change. If the number is correct, the contents of the setup will be displayed. (By repeating Steps 2 to 4, you can change the contents.) Initializing the Modes You can change the Menu settings back to the shipping condition.
PAGE 18
70B-ENG.book 58 ページ２００３年３月２７日木曜日午前１１時５３分 Others Notes and Hints ª Concerning the Power Supply ≥When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not a malfunction. ≥If the [CHARGE] Lamp does not light up although the Battery is attached to the AC Adaptor, detach the Battery and reattach it.
PAGE 19
70B-ENG.book 59 ページ２００３年３月２７日木曜日午前１１時５３分 Others ≥The [æ] Indication flashes and you cannot use the Progressive Photoshot Function when [FLASH] is turned off and [PROGRESSIVE] is set to [AUTO] and the surrounding luminosity is not enough. About [PROGRESSIVE] Setup ≥When the [æ] Indication is displayed, you can use the Progressive Photoshot Function. When [PROGRESSIVE] is [ON]: You can use the Progressive Photoshot Function at any time. In this case, however, the following functions are disabled.
PAGE 20
70B-ENG.book 60 ページ２００３年３月２７日木曜日午前１１時５３分 Others ª Wind Noise Reduction Function Low Light Mode ≥Extremely dark scenes may not be able to be made brighter to a satisfactory degree. Spotlight Mode ≥With this mode, recorded images may turn out to be extremely dark. ≥If the recording subject is extremely bright, its recorded image may turn out to be whitish. Surf & Snow Mode ≥If the recording subject is extremely bright, its recorded image may turn out to be whitish.