Model No. NV-EX21B Digital Video Camera Operating Instructions Before use, please read these instructions completely.
Dear Customer, Before Use We would like to take this opportunity to thank you for purchasing this Panasonic Movie Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Information for Your Safety Movie Camera ≥The rating plate is on the underside of the Movie Camera.
Contents Before Use CARD Mode Information for Your Safety ................................................. 2 Contents .............................................................................. 3 Standard Accessories ......................................................... 4 Optional Accessories........................................................... 4 Getting Started .................................................................... 5 Viewing What Has Been Recorded .............................
Standard Accessories 1) K2GJ2DZ00012 VSK0592 VJA0940 2) CGA-D07S 3) VSK0605 4) CR2025 N2QAEC000003 5) VFC3734 6) Illustrated on the left are accessories supplied with the Movie Camera.
Getting Started 1 Charge the Battery. (l 10) 1 ≥Attach the Battery to the AC Adaptor. ≥Connect the AC Mains Lead. (Charging starts.) ≥After the [POWER] Lamp has lighted up, the [CHARGE] Lamp flashes. When the [100%] Lamp 1 on the AC Adaptor is lit, charging is finished. POWER CHARGE 2 Attach the Charged Battery to the Movie Camera. (l 10) QUICK 100% 1 2 3 Insert the Cassette. (l 11) ≥Slide the 2 Lever to open. ≥Insert the Cassette. ≥Close the Cassette Compartment Covers.
Controls and Components 1) 4) 2) 5) 3) 6) Movie Camera (DV Camera Style) 1) Menu Button [MENU] (l 13) 2) Title Button [TITLE] (l 40) 3) Multi-Picture Button [MULTI] (l 25, 30, 37, 40) Picture-in-Picture Button [P-IN-P] (l 25) 4) Backlight Button [BLC] (l 21) Play Button [1] (l 26, 37, 39) 5) Still Button [STILL] (l 19) Pause Button [;] (l 27, 39, 45) 6) Fade Button [FADE] (l 20) Stop Button [∫] (l 26, 39) 7) Forward Search Button [SEARCHi] (l 18) Fast Forward/Cue Button [5] (l 26) 8) Reverse Search Bu
26) 27) 28) 29) 30) 31) 32) 33) 34) 35) 36) 37) 38) 39) 40) 41) 42) 35) 36) 29) 26) 27) 28) 32) PICTURE MPEG4 VOICE RESET CARD MODE CAMERA VCR OFF ON CARD P.
Remote Controller 1) OSD DATE/ TIME PHOTO SHOT START/ STOP 2) COUNTER RESET 4) TITLE ¥REC A.DUB /REW PLAY FF/W 1 5 V 6 ZOOM 5) T MULTI/ P-IN-P sVOL r 3) 6) W STILL ADV PAUSE STILL ADV E ; D INDEX K STOP INDEX L SELECT ∫ VAR. SEARCH P.B. ZOOM STORE 7) MENU SET OFF/ON ITEM P.B.DIGITAL COUNTER RESET 9) 10) ZOOM T ¥REC A.
ª Inserting a Button-type Battery Before using the Remote Controller, insert the supplied button-type battery. 1 1 While pressing the Stopper 1, pull out the Battery Holder. 2 Insert the button-type battery with the imprint (i) facing upward. 3 Insert the Battery Holder into the Remote Controller. ≥When the button-type battery is exhausted, replace it with a new CR2025 battery. (A battery is normally expected to last about 1 year. However, it depends on operation frequency.
Power Supply ª Using the AC Adaptor 1 Insert the battery-shaped connector of the DC Input Lead into the Battery Holder on the Movie Camera and slide it toward the front until it locks with a click. 2 Connect the AC Mains Lead to the AC Adaptor and the AC mains socket. ≥The AC Mains Lead’s output plug cannot be pushed fully into the AC Adaptor socket. A gap will remain as shown 1.
1 Attaching the Lens Cap 2 To protect the Lens surface, attach the Lens Cap. 1 Pass the loop of the Lens Cap Cord through the Lens Cap Installation Hole on the Movie Camera. 2 Pass the opposite side of the Lens Cap Cord through the cord’s hoop. 3 Pull the Lens Cap to the direction of the arrow. 4 Attach the Lens Cap. ≥The removed Lens Cap can be hooked onto the Grip Belt 1. (When you 3 are not recording, be sure to keep the Lens Cap attached to the Lens for protection.
Turning on the Movie Camera and Selecting Modes Turn on the power first and then select modes. OFF ON CAMERA MODE VCR CARD P. B 1 1, 2, 3 ª How to Turn on the Power 1 Set the [OFF/ON/MODE] Switch to [ON] while pressing the centre Button 1. ≥The [CAMERA] Lamp lights up. ª How to Switch Modes 2 Slide the [OFF/ON/MODE] Switch to [MODE]. ≥With each slide of the switch, the Mode changes. ≥The appropriate Mode Lamp lights up. ª How to Turn off the Power 3 Set the [OFF/ON/MODE] Switch to [OFF] .
Using the Menu Screen 2, 3, 4, 5 1 2 3 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 PUSH CAMERA VCR CARD P. B 1 To facilitate the selection of a desired function or setup, this Movie Camera displays various function setups on Menus. 1 Press the [MENU] Button. ≥When the [CAMERA] Lamp is on, the Camera Function Menu is displayed. 1 ≥When the [VCR] Lamp is on, the VCR Function Menu is displayed. 2 ≥When the [CARD P.B] Lamp is on, the Card Function Menu is displayed.
List of Menus 1) 2) 3) 4) 5) 6) CAMERA PROG.AE OFF 5 N Ω OFF ON OFF OFF 20 OFF PROGRESSIVE SIS D.ZOOM CINEMA RETURN PUSH SETUP MENU DIGITAL 7) 8) 7 º AUTO ON 100 ON ---- YES TO EXIT EFFECT EFFECT1 OFF MULTI P-IN-P WIPE MIX STROBE TRACER GAINUP MOSAIC MIRROR EFFECT2 OFF NEGA SEPIA B/W SOLARI The figures of the Menus are for explanation purposes only, and they are different from the actual Menus.
VCR Mode Main-Menu [VCR FUNCTIONS] 1) 2) 3) 4) 5) 6) [PLAYBACK FUNCTIONS] Sub-Menu PLAYBACK FUNCTIONS BLANK SEARCH ---- YES RECORD TO CARD ---- YES SEARCH PHOTO SCENE 12bit AUDIO ST1 ST2 MIX AUDIO OUT STEREO L R RETURN PRESS 7) Digital Effect On/Off [EFFECT] (l 29) 8) Digital Effect Selection [EFFECT SELECT] (l 29) EFFECT EFFECT OFF ON EFFECT SELECT OFF MULTI WIPE MIX STROBE NEGA SEPIA B/W TRACER SOLARI MOSAIC MIRROR RETURN PRESS MENU CARD 9) 10) Blank Search [BLANK SEARCH] (l 27) Recording to C
Card Playback Mode Main-Menu [CARD FUNCTIONS] [ERASE CARD FILE] Sub-Menu ERASE 1) 2) 3) 1.ERASE 2.ERASE 3.
Internal Lithium Battery Recharge The internal lithium battery sustains the operation of the clock. When the [0] Indication is lit, the internal lithium battery is near exhaustion. 1 Connect the AC Adaptor to the Movie Camera with the power turned off and then connect to the AC Mains socket. ≥After charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months. ................................................................................................................
CAMERA Mode Recording 1 PICTURE MPEG4 VOICE RESET CARD MODE 2 AUTO MNL FOCUS 1 Set the [OFF/ON/MODE] Switch to [ON]. ≥The [CAMERA] Lamp lights up. 2 2 Slide the [TAPE/CARD] Selector towards [TAPE]. 3 Press the Recording Start/Stop Button. OFF ON MODE CAMERA VCR 1 CARD P. B When recording with the Mode Selector Switch 1 set to [AUTO], the Movie Camera automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually.
Photoshot This Movie Camera can take approximately 7 seconds still pictures containing sound. 2 1 Slide the [TAPE/CARD] Selector towards [TAPE]. 2 Press the [PHOTO SHOT] Button in the Recording Pause Mode. ≥The Movie Camera records a still picture for about 7 seconds and then switches back to the Recording Pause Mode. ª Progressive Photoshot PHOTO SHOT With the Progressive Photoshot Function, you can record still pictures with higher resolution than with the normal Photoshot Function.
Digital Zoom Function W.B./SHUTTER/IRIS/ MF/VOL/JOG 1 2 1 PUSH 1 2 W This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1k to 10k magnification. With the Digital Zoom Function, you can select a magnification of 20k or even to 100k. 1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [D.ZOOM] >> [20t] or [100t].
Cinema Function 1 This function is for recording in a cinema-like wide screen. 1 Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> CINEMA [CINEMA] >> [ON]. ≥Black bars appear at the top and bottom of the screen. 1 To Cancel the Cinema Mode Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] >> [OFF]. 1 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 ≥For other notes concerning this item, see page 46.
Recording in Natural Colours 2, 3 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 PUSH AUTO MNL FOCUS 1 (White Balance) Depending on the scene or light condition, the Automatic White Balance Adjustment Mode may not be able to bring out natural colours. (l 22, 56) In such a case, the white balance can be adjusted manually. When the Movie Camera is turned on with the Lens Cap on, the automatic white balance may not work properly. Please turn on the Movie Camera after removing the cap.
Manual Shutter Speed Adjustment It is useful for recording fast-moving subjects. 1 Set the Mode Selector Switch to [MNL]. ≥The [MNL] Indication 1 appears. 2 Press the [PUSH] Dial until the Shutter Speed Indication 2 2, 3 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 PUSH AUTO MNL FOCUS appears. 1 3 Turn the [PUSH] Dial to adjust the shutter speed. Range of Shutter Speed Adjustment 1/50–1/8000 s (or 1/25-1/500 : for Mega Pixel Recording) The standard shutter speed is 1/50 s.
Digital Effect Functions This Movie Camera is equipped with Digital Effect Functions that add special effects to the scene. [EFFECT 1] 1) MULTI 3) WIPE 2) P-IN-P Digital Effects 1 [EFFECT1] 4) MIX 1) 2) 3) 4) 5) 6) 7) 5) STROBE 8) 9) 6) GAINUP 8) MOSAIC Multi-Picture Mode [MULTI] (l 25) Picture-in-Picture Mode [P-IN-P] (l 25) Wipe Mode [WIPE] (l 24) Mix Mode [MIX] (l 24) Strobe Mode [STROBE] ≥It records images with a stroboscopic effect. Gain-up Mode [GAINUP] ≥It brightens images electronically.
ª Multi-Picture Mode W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 1 PUSH 1, 2 3 4 4 PHOTO SHOT 1 Strobe Multi-Picture Mode 1: You can capture and record 9 consecutive small still pictures. Manual Multi-Picture Mode 2: You can manually capture and record 9 small still pictures. After setting [DIGITAL EFFECT] >> [EFFECT1] >> [MULTI]..... 1 Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE] or [MANUAL]. When [STROBE] is selected: ≥Set the [SPEED] to the desired strobe speed.
VCR Mode 3 Playing Back 3 The recorded scene can be played back immediately after the recording. 1 Slide the [OFF/ON/MODE] Selector Switch to [MODE] and set the Movie Camera to the VCR Mode. 2 ≥The [VCR] Lamp lights up. 1 2 Press the [6] Button to rewind the tape. ≥Rewind the tape to the point where you want to start playback. ≥When the tape reaches the beginning, rewinding stops automatically. 3 Press the [1] Button to start playback. ≥The [!] Indication 2 appears. W.B.
Slow Motion Playback This Movie Camera can play back at a slow speed. DATE/ TIME COUNTER RESET 1 2 PHOTO SHOT TITLE T ¥REC A.DUB /REW PLAY FF/W 1 5 6 1 Press the [1] Button. 2 Press the [E] Button or [D] Button on the Remote Controller. ≥The [}] or [~] Indication appears. 1 ZOOM MULTI/ P-IN-P V START/ STOP sVOL r OSD STILL ADV PAUSE STILL ADV E ; D INDEX K STOP INDEX L SELECT ∫ VAR.
Index Search Functions W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 1 PUSH 1 DATE/ TIME COUNTER RESET 3 PHOTO SHOT TITLE ¥REC A.DUB /REW PLAY FF/W 1 5 6 ª Photoshot Index Search 1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> ZOOM T MULTI/ P-IN-P V START/ STOP sVOL r OSD [SEARCH] >> [PHOTO]. W 2 Press the [9] Button 1 or [:] Button 2 on the Remote STILL ADV PAUSE STILL ADV 4 2 E ; D INDEX K STOP INDEX L SELECT ∫ VAR. SEARCH Controller. 1 P.B.
Playback Zoom Function A part of the image can be enlarged up to 10 times during playback. PHOTO SHOT DATE/ TIME OSD COUNTER RESET 1 During playback, press the [P.B. ZOOM] Button on the START/ STOP TITLE Remote Controller. ZOOM ≥The centre of the image is enlarged to approximately 2 times. MULTI/ P-IN-P ¥REC A.DUB /REW PLAY FF/W 1 5 V 6 sVOL r T 2 W STILL ADV PAUSE STILL ADV E ; D INDEX K STOP INDEX L ∫ SELECT VAR. SEARCH P.B.
ª Playing Back with Multi-Picture Mode Strobe Multi-Picture Mode [STROBE] 1: 1, 2 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 PUSH 1, 1 3 4 You can capture 9 consecutive still pictures from playback pictures. Manual Multi-Picture Mode [MANUAL] 2: Selecting the desired still picture one at a time, you can capture 9 still pictures. Index Multi-Picture Mode ([PHOTO], [SCENE]) 3: You can capture 9 screens of pictures to which index signals have been attached.
Playing Back on Your TV 21-pin Adaptor [S-VIDEO IN] By connecting your Movie Camera with your TV, the recorded scenes can be viewed on your TV screen. ≥Before connecting them, turn off the power of both the Movie Camera and TV. 1 Connect the [AV OUT] Socket of the Movie Camera and the Video and Audio Input Sockets of the TV. [VIDEO IN] [AUDIO IN] ≥Using the AV Cable 1, make a connection with the TV. If the TV has an S-Video Socket, connect the S-Video Cable 2, too.
Audio Dubbing W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1, 2 1 PUSH 1 You can add music or narration to the recorded Cassette. ≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.) ≥Audio Dubbing cannot be performed on a recording done in LP Mode. (l 17) 1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK] >> [IN/OUT]. 2 Select [A.DUB INPUT] >> [MIC] or [AV IN].
CARD Mode 2 DV Camera Style and SD Camera Style 3 5 This is a Digital Video Camera which can be used in two ways depending on the situation. One is the DV Camera Style 1 which combines the Camera Unit 2 and Video Unit 3, and the other is the SD Camera Style 4 which combines the Camera Unit 2 and the supplied Battery Adaptor Unit 5. DV Camera Style ≥Both Tape and Card can be used. SD Camera Style ≥It is easy to carry, because of small and light weight. ≥Tape cannot be used.
6 Using a Card 5 ACCESS A Card can be used to record files or play back files. ≥Use genuine card only. CARD EJECT ª Inserting a Card Before inserting a Card, be sure to turn off the Movie Camera. 1 1 2 1 While holding the Memory Card with its cut off corner A facing right 1, insert it into the Card Slot 2. ≥The display of the Card Slot changes from 3 to 4. A Ejecting a Card After turning the Movie Camera off, slide the [CARD EJECT] Lever 5 to the left.
ª Recording a Moving Picture (MPEG4) It is possible to record approximately 6 minutes moving pictures on supplied 8MB SD Memory Card. If you want to play back on the computer, recorded MPEG4 data can be played back on Windows Media Player. After installing G726 Driver that is enclosed in the supplied USB Connection Kit, play it back with Windows Media Player. 3 Recording from the Movie Camera Lens (Camera Mode) 1 Slide the [TAPE/CARD] Selector towards [CARD].
ª Automatically Copying Still Pictures That Have Already Been Recorded on a Tape The images with the Photo Index signals are automatically recorded to the Card. W.B./SHUTTER/IRIS/ 2 2 MF/VOL/JOG 1 1 Set the Movie Camera to Still Playback Mode at the scene PUSH immediately before you want to start copying images. 2 1 1 2 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [RECORD TO CARD] >> [YES]. ≥During copying, the Indication 1 appears.
Playing Back a Card 3, 4, 1, 2 It plays back files recorded on a Card. W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 Set the Movie Camera to Card Playback Mode. 1 ≥The [CARD P.B] Lamp lights up. ≥The file that was recorded last on the Card is displayed. PUSH 1 3,5 2, 4 2 Slide the [PICTURE/MPEG4/VOICE] Selector Switch to select the type of data. 3 Start Playback.
Recording Pictures on a Card to a Tape 3, 2, 3 2 W.B./SHUTTER/IRIS/ MF/VOL/JOG 1 PUSH 3 3, 2 PHOTO SHOT TAPE 1 CARD 4 Card Images can be recorded on the Tape one at a time or all automatically. After setting to Card Playback Mode, please carry out the following steps. To Copy 1 Picture 1 Slide the [TAPE/CARD] Selector towards [TAPE]. 2 Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE]. 3 Display a desired picture. 4 Press the [PHOTO SHOT] Button. ≥During the copying, the Indication 1 appears.
Slide Show The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content. 1, 2, 3, 4, 5, 7 1, 2, 3 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 1 PUSH 1, 6, 7 1 To Select Pictures to Play Back in Your Slide Show 1 After set the [PICTURE/MPEG4/VOICE] Switch to [PICTURE], set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. ≥Slide Show editing screen appears. 8 2 Set [EDIT] >> [YES].
Creating a Title CREATE You can create a title and record on a Card. TITLE 1 Camera Mode: Set the Lens to the image you want to use for creating a title. VCR Mode: Search for the image you want to use for creating a title and set the Movie Camera to the Still Playback Mode. 2 Set [CARD SETUP] >> [CREATE TITLE] >> [YES]. 3 Press the [PHOTO SHOT] Button. LUMINANCE RETURN PRESS MENU TO EXIT W.B./SHUTTER/IRIS/ MF/VOL/JOG 2, 4, 5, 6 2 1 PUSH 1 ≥The title is stored.
Protecting the Files on a Card W.B./SHUTTER/IRIS/ MF/VOL/JOG 1, 2, 3 2 (Lock Setting) Precious files recorded on a Card can be locked (to prevent accidental erasure). (Even if files are locked, the files will be deleted when the Card is formatted.) 1 PUSH 1 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK] >> [YES]. ≥The [FILE LOCK] Menu is displayed. 2 Select [PICTURE] or [TITLE]. 3 Select the file to be locked, and press the [PUSH] Dial. ≥The [ ] Indication 1 is attached to the selected file.
Formatting a Card 1 W.B./SHUTTER/IRIS/ MF/VOL/JOG 2 If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card. 1 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [CARD PUSH FORMAT] >> [YES]. ≥Since a confirmation message appears, select [YES] and formatting will be carried out. ≥When the formatting is completed, the screen becomes white.
Using the USB Connection Kit Using the supplied USB Connection Kit, you can import still pictures on the card into your personal computer. 1 2 3 4 1 Install the supplied USB driver. Set the Movie Camera to Card Playback Mode. Set the Movie Camera to Still Playback Mode. Connect the supplied USB Cable to [DIGITAL (to USB)] Socket 1. ≥It enters PC connection mode. 4 2, 3 DIGITAL (to USB) ≥The USB Connection Kit can be used with Windows98 Second Edition/Me/ 2000.
Others Indications Various functions and the Movie Camera status are shown on the screen. r: Remaining Battery Power ≥When the battery power becomes low, the Indication changes. When the battery is discharged completely, the u (v) Indication flashes. (When you are using the AC Adaptor, the [s] Indication may appear, however, this is not a malfunction.) R0:45: Remaining Tape Time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.
ª To Change the Counter Display Mode Warning/Alarm Indications By changing [C.DISPLAY] on the [DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication [COUNTER] (0:00.00), Memory Counter Indication [MEMORY] (M0:00.00), and Time Code Indication [TIMECODE] (0h00m00s00f). By repeatedly pressing the [COUNTER] Button on the Remote Controller, you can change the Counter Display Mode.
Notes and Hints ª Photoshot ª Concerning the Power Supply ≥Photoshot Recording results in slightly inferior image quality. ≥When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not a malfunction. ≥If the [CHARGE] Lamp does not light up although the Battery is attached to AC Adaptor, detach the Battery and reattach it.
ª Programme AE ª White Balance ≥If any of the Programme AE Modes is selected, you cannot adjust the shutter speed (l 23) or iris (l 23). ≥When you set [EFFECT1] of [DIGITAL EFFECT] SubMenu on the [CAMERA FUNCTIONS] Main-Menu to [GAINUP], it is not possible to change the programme AE setting. (When Sport Mode or Portrait Mode is used, programme AE is set to [OFF].
ª Digital Effect Functions (Camera Mode) ª Playing Back It is as follows when [GAINUP] is selected. Repeat Playback ≥You need to adjust the Focus manually. ≥The shutter speed, White Balance and Iris cannot be operated. ≥The Sports Mode [5] and the Portrait Mode [7] are cancelled. If you continue to press the [1] Button for 5 seconds or longer, the Movie Camera switches to Repeat Playback Mode, and the [R !] Indication appears. (To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].
ª Multi-Picture Mode (VCR Mode) ≥The quality of Multi images deteriorates slightly. ≥Playback multi-mode screens cannot be output through the DV Terminal or Digital Still Picture Terminal. ≥If there is input from the DV Terminal, a multi screen cannot be created. ≥When signals are input from the S-Video Input/Output Socket or Audio-Video Input/Output Socket, a multi screen cannot be re-displayed.
ª Card PhotoShot ª Playing Back a Card ≥The sound cannot be recorded. ≥The Shutter Effect cannot be used. ≥The Progressive Function is set to [ON]. ≥The shutter speed becomes 1/50-1/500. (or 1/25-1/500: for Mega Pixel Recording) ≥When viewed on a TV or liquid crystal monitor, image quality deteriorates slightly. ≥The screen becomes sligtly wider. ≥Mega-pixel images cannot be recorded on a cassette as a Mega-pixel picture.
ª Adding a Title ≥When the [PICTURE/MPEG4/VOICE] Selector Switch is set to [MPEG4] or [VOICE], title in is not possible. ≥When a title is displayed in playback mode, the title is not output from the DV Terminal or Digital Still Picture Terminal. ≥If you press the [TITLE] Button, the last original title is displayed. When an original title is not created, the preset title is displayed. ≥The Multi-Picture Mode cannot be used once titles are inserted.
Cautions for Use ª After Use 1 Take out the Cassette. (l 11) 2 Set the [OFF/ON/MODE] Switch to [OFF]. 3 Remove the Card. 4 Detach the power supply and retract the Viewfinder or the LCD Monitor. (l 10, 12) 5 To protect the Lens, attach the supplied Lens Cap. ª Cautions for Use When you use your Movie Camera in a rainy or snowy day or on a beach, make sure that no water enters inside the Movie Camera. ≥Water may cause the Movie Camera or Cassette to malfunction. (Irreparable failure may occur.
ª Condensation If the Condensation Indication flashes after the Movie Camera is turned on, condensation has formed inside the Movie Camera. In this case, the Movie Camera power is turned off automatically after about 1 minute. Follow the steps below: 1 Take out the Cassette. ≥None of the other functions operate. Depending on the amount of condensation, removing the Cassette may even become difficult. If this happens, wait for 2 to 3 hours before taking the Cassette out.
ª Cautions for Storage Before storing the Movie Camera, take the Cassette out and detach the Battery. Store all the components in a dry place with a relatively stable temperature. (Recommended Temperature:15 to 25oC, Recommended Humidity:40 to 60%) Movie Camera ≥Wrap it with a soft cloth to prevent dust from getting into the Camera. ≥Do not leave the Movie Camera in places that expose it to high temperature. Battery ≥Extremely high temperatures or low temperatures will shorten the life of the Battery.
3-2: Has condensation occurred? Wait until the Condensation Indication disappears. (l 53) Battery 1: Battery runs down quickly. 1-1: Is the Battery fully charged? Charge it with the AC Adaptor. (l 10) 1-2: Are you using the Battery in an extremely cold place? In cold places, the operating time of the Battery becomes shorter. (l 53) 1-3: Has the Battery worn out? If the operating time is still too short even after the Battery is fully charged, the Battery has worn out. 2: The Battery cannot be charged.
Explanation of Terms ª Digital Video System In a digital video system, images and sounds are converted into digital signals and recorded on a tape. This complete digital recording is capable of recording and playback with minimal image and sound deterioration. In addition, it automatically records data, such as Time Code and Date/Time, as digital signals.
Specifications Digital Video Camera Information for your safety Power Source: Power Consumption: DC 7.9/7.2 V Recording 4.6 W (When using Viewfinder) 5.5 W (When using LCD Monitor) Recording Format: Mini DV (Consumer-use Digital Video SD Format) 6.35 mm digital video tape SP: 80 min.; LP: 120 min.
Index ªA ªP AC Adaptor................................................................. 10, 52 Audio Dubbing .................................................................. 32 Auto Focus ....................................................................... 56 Automatic White Balance Adjustment .............................. 56 Photoshot.................................................................... 19, 34 Picture Size.................................................................
B VQT9435 F0901Ka0( 500 A) C Matsushita Electric Industrial Co., Ltd. Web site: http://www.panasonic.co.
