VQT1L48_ENG.book 1 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Operating Instructions Digital Video Camera Model No. NV-GS330 Before use, please read these instructions completely.
VQT1L48_ENG.book 2 ページ ２００７年１２月１１日 Information for your safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥ USE ONLY THE RECOMMENDED ACCESSORIES. ≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
VQT1L48_ENG.book 3 ページ ２００７年１２月１１日 Pages for reference Pages for reference are indicated by dashes either side of a number, for example: -00The menu operation flow is indicated by >> in the description. IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD. 火曜日 午後４時５５分 -If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union.
VQT1L48_ENG.book 4 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before opening the CD-ROM package, please read the following. End User License Agreement (for USB Driver, SweetMovieLife and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
VQT1L48_ENG.book 5 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Contents Information for your safety ................................... 2 Before using Accessories.......................................................... 6 Optional................................................................ 6 Parts identification and handling .......................... 6 Fitting the lens cap............................................... 8 The grip belt ......................................................... 9 Power supply ......
VQT1L48_ENG.book 6 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Before using Accessories Parts identification and handling ª Camera The followings are the accessories supplied with this product.
VQT1L48_ENG.book 7 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using (8) (14) (15) (16) (17) (9) (10) (20) (21) (22) (18) (19) (11) (12) (23) (24) (25) (13) (8) Viewfinder -13-, -76- Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the Viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) USB terminal [ ] -48-, -57DC input terminal [DC/C.C.
VQT1L48_ENG.book 8 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Fitting the lens cap Fit the lens cap to protect the surface of the lens. ≥The lens cap and the lens cap cord come pre-attached to the grip belt. ≥When not using the lens cap, pull the lens cap cord in the direction of the arrow. 1 ≥When you are not recording, be sure to cover the lens with the lens cap for protection. 2 (32) (32) Tripod receptacle This is a hole for attaching the camera to optional tripod/VW-CT45E.
VQT1L48_ENG.book 9 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using The grip belt Power supply Adjust the belt length so it fits your hand. 1 Adjust the belt length and the pad position. ª Charging the battery When this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time (-11-) ≥We recommend using Panasonic batteries. (-6-) ≥If you use other batteries, we cannot guarantee the quality of this product.
VQT1L48_ENG.book 10 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. 1 ª Fitting the battery Push the battery against the battery holder and slide it until it clicks. ª Removing the battery While sliding the [BATTERY] lever, slide the battery to remove it.
VQT1L48_ENG.book 11 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer. Supplied battery/ (7.2 V/ 640 mAh) A B VW-VBG130 (7.2 V/ 1320 mAh) A B C C VW-VBG260 (7.2 V/ 2640 mAh) A B C VW-VBG6 (7.
VQT1L48_ENG.book 12 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª How to turn the power on and off with the LCD monitor/viewfinder When the power switch is set to [ON], the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. OFF Setting date and time When the movie camera is turned on for the first time, [SET DATE AND TIME] will appear. ON 1 Open the LCD monitor out or extend the viewfinder to use.
VQT1L48_ENG.book 13 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª Recharging the built-in lithium battery ≥If [0] or [--] is appears when the camera is turned on, then the built-in lithium battery has run down. Use the steps below to charge the battery. When turn on the power for the first time after charging, [SET DATE AND TIME] will appear. Select [YES] and set the date and time. Connect the AC adaptor to the camera or attach the battery to the camera, and the built-in lithium battery will be recharged.
VQT1L48_ENG.book 14 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Quick Start When quick start is ON the battery power is still being consumed, even when the LCD monitor and the viewfinder are closed. The movie camera will resume recording/pause mode about 1.7 seconds after the LCD monitor or the viewfinder is reopended. ≥Please note in quick start mode approximately half the pause recording power is being consumed. Using quick start mode will reduce the battery recording/playback time.
VQT1L48_ENG.book 15 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Inserting/removing a cassette 1 Fit the AC adaptor or the battery and turn on the power. 2 Slide the [OPEN/EJECT] lever and open the cassette cover. OPEN/ EJECT ≥When the cover is fully opened, the cassette holder will come out. 3 After the cassette holder is opened, insert/ remove the cassette. ≥When inserting a previously recorded cassette, use the blank search function to find the position where you want to continue recording.
VQT1L48_ENG.book 16 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª Card access lamp Inserting/removing a card Before inserting/removing a card, set the [OFF/ON] switch to [OFF]. ≥If the card is inserted or removed with the power turned on, this camera may malfunction or the data recorded on the card may be lost. 1 Turn off the power 1. 1 OFF ON ≥Check that the Status indicator has gone off. 2 Open the card slot cover. 3 Insert/remove the card into/from the card slot.
VQT1L48_ENG.book 17 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Selecting a mode How to use the joystick Rotate the mode dial to select the desired mode. 1 Rotate the mode dial. ≥Set your desired mode to 1. ª Basic joystick operations Operations on the menu screen and selection of files to be played back on the multi-image display Move the joystick up, down, left, or right to select an item or file, and then push in the centre to set it.
VQT1L48_ENG.
VQT1L48_ENG.book 19 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Help mode Switching the language Select an icon for an explanation of the function. ≥Set to Tape/Card Recording Mode. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears. You can switch the language on the screen display or the menu screen. 1 Set [LANGUAGE] >> select the desired language. 1 2 Move the joystick right to select the Help mode icon [ ].
VQT1L48_ENG.book 20 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using 5 Move the joystick right or press it to set the selection. ª Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the [MENU] button. 6 Move the joystick up or down in order to select the item to be set. 2 Select a menu item. ≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit.
VQT1L48_ENG.book 21 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Adjusting LCD monitor/viewfinder ª Adjusting the brightness and colour level 1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES]. ≥When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted. ≥To adjust the brightness of the viewfinder, close the LCD monitor and extend the viewfinder to activate it. ≥These settings will not affect the images actually recorded.
VQT1L48_ENG.book 22 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Using the remote control (10) ª Remote control Using the remote control supplied will enable controlling almost all the functions of this camera to be controlled.
VQT1L48_ENG.book 23 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Warning Keep the Button-Type battery out of the reach of children. Never put ButtonType battery in mouth. If swallowed call your doctor.
VQT1L48_ENG.book 24 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Record mode Check before recording Check the following before recording important events such as weddings or when the movie camera has not been used for a long time. Conduct a test recording to make sure that the image recording and the audio recording work properly.
VQT1L48_ENG.book 25 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Recording on a tape Remove the lens cap. (-8-) (When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.) When this unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV.
VQT1L48_ENG.book 26 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Recording check Blank search function The last image recorded is played back for 2 to 3 seconds. After checking, the camera will be set to a recording pause. ≥Set to Tape Recording Mode. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears. 2 Move the joystick left to select the recording check icon [ ]. Searches for the last part of the image recorded (unused part of the tape).
VQT1L48_ENG.book 27 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Recording still pictures on a card while recording image onto a tape Recording still pictures onto a card (Photoshot) You can record still pictures while recording image onto a tape. ≥Set to Tape Recording Mode. 1 Press the [ ] button fully while recording image onto a tape. ≥Set to Card Recording Mode. 1 Press the [ ] button halfway in order to adjust focusing. (For auto focusing only) ≥If you set [O.I.S.
VQT1L48_ENG.book 28 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode ª To record still pictures clearly ≥When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding the movie camera by hand. We recommend decreasing the zoom magnification and approaching the subject when recording. ≥When recording still pictures, hold the movie camera firmly with your hands and keep your arms stationary at your side so as not to shake the movie camera.
VQT1L48_ENG.book 29 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode ≥When the scene lacks contrast. ≥When recording on tape. ª Concerning the focusing area ≥When there is a contrasting object ahead or behind the subject in the focus area, the subject may not be focused. If so, move the contrasting object out of the focus area. ≥Even when it is still difficult to focus, adjust the focus manually.
VQT1L48_ENG.book 30 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Recording yourself Backlight compensation function You can record yourself while viewing the LCD monitor. You can record persons in front of the camera while presenting them the image. The image is horizontally flipped as if you see a mirror image. (However the image to be recorded is not altered.) ≥Extend the viewfinder to see the picture while recording. 1 Rotate the LCD monitor towards the lens side.
VQT1L48_ENG.book 31 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Colour night view function Soft skin mode This function allows you to record colour subjects in dark locations to stand out against the background. Attach the camera to a tripod, and you can record images free from vibration. ≥Recorded scene is seen as if frames were missed. ≥Set to Tape Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears.
VQT1L48_ENG.book 32 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Tele macro function Fade in/fade out function By focusing only on the subject and blurring the background, the image can be impressive. This camera can focus on the subject at a distance of approx. 50 cm. ≥Set to Tape/Card Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears. 2 Move the joystick right to select the tele macro icon [ ]. Fade in The image and audio gradually appear.
VQT1L48_ENG.book 33 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode ª To cancel fading Select the [ ] icon again. ≥The [FADE OFF] indication appears on the screen of the movie camera. ª To select the colour for fade in/out The colour which appears in fading pictures can be selected. 1 Set [ADVANCED] >> [FADE COLOUR] >> [WHITE] or [BLACK].
VQT1L48_ENG.book 34 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Self-timer recording Wide/4:3 Function You can record still pictures on a card using the timer. ≥Set to Card Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears. 2 Move the joystick left to select the self-timer recording icon [ ]. This allows you to record images compatible with wide-screen TVs. Wide Function Images are recorded with a 16:9 aspect ratio.
VQT1L48_ENG.book 35 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Image stabilizer function Reduces the image shaking due to hand movement when recording. ≥Set to Tape/Card Recording Mode. 1 Set [ADVANCED] >> [O.I.S.] >> [ON]. Recording in various situations (Scene mode) When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥Set to Tape/Card Recording Mode. 1 Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
VQT1L48_ENG.book 36 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Sports mode ≥For slow-motion playback or playback pause of recorded pictures, this mode presents free of camera shakes. ≥During normal playback, the image movement may not look smooth. ≥Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change. ≥If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear.
VQT1L48_ENG.book 37 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode ≥When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap. ≥When setting both the white balance and the iris/gain, set the white balance first. ≥Whenever recording conditions change, re-set the white balance for correct adjustment.
VQT1L48_ENG.book 38 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Record mode Manual shutter speed/aperture adjustment Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. ≥Set to Tape/Card Recording Mode. 1 Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. 2 Move the joystick left or right to select the aperture icon [ [ ]. ] or shutter speed icon MNL 3 Move the joystick left or right in order to adjust the shutter speed or aperture.
VQT1L48_ENG.book 39 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode Playback mode Playing back tape ≥Set to Tape Playback Mode. (An operation icon automatically appears on the LCD monitor.) ª To adjust volume Adjust the speaker volume for playback. 1 Move the [j /VOLi] lever to adjust the volume. VOL 1 Operate with joystick. 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon.) 5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.
VQT1L48_ENG.book 40 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode Slow-motion playback/ frame-by-frame playback ≥Set to Tape Playback Mode. (Slow-motion playback can only be performed by using the remote control.) Slow-motion playback If the image is recorded in the SP mode, then it will be played back at a speed approx. 1/5 the normal speed. If the image is recorded in the LP mode, then it will be played back at a speed approx. 1/3 the normal speed.
VQT1L48_ENG.book 41 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode 4 Move the joystick up to select the [1/;] Playback on TV Images recorded by this camera can be played back on a TV. ≥Insert a recorded tape or card into this camera. ≥Be sure that the power of the unit is turned off before connecting it to a TV. 1 Connect the movie camera and a TV. icon to start playback. ≥The image and audio are output on the TV. 5 Move the joystick down to select the [∫] icon to stop playback.
VQT1L48_ENG.book 42 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode Playing back card ≥Set to Card Playback Mode. (An operation icon automatically appears on the LCD monitor.) ª To display multiple playback files Multiple files on the card (6 files on 1 screen) are displayed. 1 Move the [s /VOLr] lever to switch the images. 1 Operate with joystick.
VQT1L48_ENG.book 43 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode Deleting files recorded on a card ª Deleting still picture files recorded on The deleted files cannot be restored. ≥Set to Card Playback Mode. 1 Move the joystick left or right to select a file to delete. ≥A still picture file (other than JPEG) that cannot be played back on the movie camera may be erased. a card by other equipment Formatting a card ≥You can select a file in the multi-screen display.
VQT1L48_ENG.book 44 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Playback mode Protecting files on a card Files recorded on a card can be locked so that they may not be deleted by mistake. (Even if the files are locked, they will be deleted if the card is formatted.) ≥Set to Card Playback Mode. 1 Set [BASIC] >> [PROTECT] >> [YES]. 2 Move the joystick to select a file to be locked, and then press it.
VQT1L48_ENG.book 45 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Edit mode Edit mode Recording from a tape onto a card Still pictures can be recorded on a memory card from scenes that have already been recorded on a cassette. ≥Set to Tape Playback Mode. ≥Insert a tape which already has recorded contents and a card. 1 Start playback. Copying onto a DVD recorder or a VCR (Dubbing) Pictures recorded by the movie camera can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder.
VQT1L48_ENG.book 46 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Edit mode ≥If you record (dub) images onto another video device and then play them back on a widescreen TV, the images may be stretched vertically. In this case, refer to the operating instructions for the device that you are recording (dubbing) to or read the operating instructions for the TV and set to 16:9 (full). ≥For more information, refer to the operating instructions for your TV set and recorder.
VQT1L48_ENG.book 47 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Edit mode ª To cancel the standby for recording When the camera is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control. ≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly. ≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.
VQT1L48_ENG.book 48 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Edit mode ª Before recording with audio dubbing ≥Set to Tape Recording Mode. ≥When you want to preserve the original sound taken during recording, set [ADVANCED] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.) ≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.
VQT1L48_ENG.book 49 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Edit mode 3 Move the joystick left and right to select a desired picture, and then press it. 4 Select the desired number of prints. ≥You can set up to 9 prints. 5 Select the setting for date printing. ≥If the printer is not capable of date printing, this setting is unavailable. 6 Select [PAPER SIZE]. [STANDARD]: Size specific to the printer [4a5 INCH] [5a7 INCH] [4a6 INCH] [A4] ≥You cannot set paper sizes not supported on the printer.
VQT1L48_ENG.book 50 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC With a PC Before Use ª Introduction You can connect your personal computer to a movie camera. You can transfer images recorded with your movie camera to your personal computer. By controlling the movie camera from the personal computer, the desired images from tape or camera can be acquired into the personal computer.
VQT1L48_ENG.book 51 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC ª Check before Use The software available and the drivers required vary depending on the OS of the personal computer. Check the software used and the drivers required using the table below and then install them from the CD-ROM.
VQT1L48_ENG.book 52 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC Free hard disk space: Ultra DMA – 33 or more (100 or more is recommended) 640 MB or more Separate free space is required for importing and editing video. [1 GB capacity is requied for a video of around 4 minutes in the AVI (DV-AVI) format.] Interface: DV (IEEE1394) terminal (IEEE1394.a) USB port (Hi-Speed USB(USB 2.
VQT1L48_ENG.book 53 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC To use the movie camera as a Web Camera, the following conditions must be met. Install/Connection ≥To upgrade Windows XP to SP2, click [start] >> [All Programs] >> [Windows Update]. (Requires internet connection.) ≥To upgrade Windows 2000 to SP4, click [start] >> [Windows Update]. (Requires internet connection.) ≥If the installed version is not latest, update it by performing the Windows update.
VQT1L48_ENG.book 54 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC Depending on your personal computer, one of the following screens may appear. 2 Click [SweetMovieLife 1.1E]. 1 Your personal computer does not support USB port (Hi-Speed USB(USB 2.0)) so the video on tape cannot be imported from the video camera to the personal computer with the USB cable. Cancel ≥You can use the Web Camera function. 2 The personal computer has recognised a Hi-Speed USB(USB 2.0) driver other than the Microsoft driver.
VQT1L48_ENG.book 55 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC ≥When you use Windows 2000 (SP4) to connect the personal computer and the movie camera by USB cable and then use MotionDV STUDIO, installing the USB driver is needed. Vista, Windows XP (SP2) or Windows 2000 (SP4), check the driver of the USB host controller. ≥It is required to use the driver for which [Microsoft] is displayed on [Driver Provider] in [Driver] tab.
VQT1L48_ENG.book 56 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC 4 Click [Standard Universal PCI to USB Host Controller] and then click [Next]. ≥If [Microsoft] is displayed on [Driver Provider], the confirmation procedure is completed. If a description other than [Microsoft] is displayed ≥Update the driver with the following procedure. 5 Click [Finish]. (for Windows XP/2000) (for Windows Vista) 1 Click [Update Driver...]. 1 Click [Update Driver...]. ≥The update of the driver is completed.
VQT1L48_ENG.book 57 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC Software With USB cable (supplied) ª Using SweetMovieLife 1.1E/MotionDV STUDIO 6.0E LE (Windows Vista, Windows XP SP2, Windows 2000 SP4) If you wish to capture data from a tape, set the movie camera to tape playback mode and insert the tape. If you wish to capture images from the lens of the movie camera, set the movie camera to the tape recording mode and remove the tape and the card.
VQT1L48_ENG.book 58 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC With DV cable (optional) 1 Set the movie camera to tape recording mode or tape playback mode. ≥You cannot use SweetMovieLife in tape recording mode. 2 Connect the movie camera to personal computer with auxiliary DV cable. 1) ª Using the movie camera as a Web Camera (Windows Vista, Windows XP SP1/ SP2, Windows 2000 SP4) To upgrade Windows XP to SP2, click [start] >> [All Programs (Programs)] >> [Windows Update].
VQT1L48_ENG.book 59 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC guaranteed with any other USB connection cables.) 5 Start the MSN Messenger/Windows Live Messenger. ≥Click [start] >> [All Programs (Programs)] >> [MSN Messenger]/[Windows Live Messenger]. ≥To send pictures recorded on a tape to other personal computer using the MSN Messenger/ Windows Live Messenger, set [BASIC] >> [USB FUNCTION] >> [WEBCAM] on tape playback mode before connecting the movie camera to your personal computer.
VQT1L48_ENG.book 60 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC Note on the folder structure of the card A card formatted with the movie camera is composed by folders as described in the illustration below. 3 Verify [Matshita DVC USB Device] is selected and click [OK]. DCIM 256 100CDPFP MISC [100CDPFP]: The images (IMGA0001.jpg, etc.) in this folder are recorded in the JPEG format. [MISC]: Files in which DPOF data has been set to the image are in this.
VQT1L48_ENG.book 61 ページ ２００７年１２月１１日 火曜日 午後４時５５分 With a PC ª Using on Macintosh ≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥PowerPC is a trademark of International Business Machines Corporation. To disconnect USB cable safely Drag [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB cable. Operating environment on iMovie 4/ iMovie HD/iMovie ’08 OS: With pre-installed; Mac OS X v10.
VQT1L48_ENG.book 62 ページ ２００７年１２月１１日 火曜日 With a PC ª Notes ≥Do not disconnect USB cable while the status indicator of the movie camera is on. It may freeze the software or destroy the data in transfer. ≥When the movie camera is switched to the PC connection mode while it is connected to the personal computer, the operation mode of the movie camera cannot be switched. In this case, disconnect the USB cable. Switch the operation mode of the movie camera and reconnect the cable.
VQT1L48_ENG.book 63 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Menu Menu ª [TAPE PLAYBACK MENU] Menu list Menu figures and illustrations are provided for easy-to-understand explanations, and so they are different from the actual menu indications. ª [TAPE RECORDING MENU] 1) [BASIC] [DATE/TIME] -65[USB FUNCTION] -57- 1) [BASIC] [SCENE MODE] -35[REC SPEED] -24[WIND CUT] -33[REC ASPECT] -34[CLOCK SET] -122) [ADVANCED] [PICT.QUALITY] -28[PICTURE SIZE] -28[O.I.S.
VQT1L48_ENG.book 64 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Menu ª [CARD RECORDING MENU] 1) [BASIC] [SCENE MODE] -35[PICT.QUALITY] -28[PICTURE SIZE] -28[REC ASPECT] -34[CLOCK SET] -122) [ADVANCED] [O.I.S.
VQT1L48_ENG.book 65 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Menu Menus related to taking pictures ª [DATE/TIME] This switches between date and time indications. ≥The movie camera automatically records the date and time of picture taking on the tape/card. ≥You can also show or change the date/time indication by repeatedly pressing the [DATE/TIME] button on the remote control. ª [AUDIO REC] Switches the audio (PCM audio) recording systems. [12bit]: Records audio in “12 bit 32 kHz 4 tracks”.
VQT1L48_ENG.book 66 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others Others Indications Various functions and the movie camera status are shown on the screen. Basic indications : Remaining battery power 0h00m00s00f: Time code 15:30:45: Date/Time indication Recording indications R 0:45: Remaining tape time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.
VQT1L48_ENG.book 67 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others ≥For images not recorded with this unit, the number of horizontal and vertical pixels may differ so the image size is not displayed. Warning/alarm indications If any one of the following indications lights up or flashes, please check the movie camera. Confirmatory indications Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted. No cassette is inserted. [--]/0: The built-in battery is low.
VQT1L48_ENG.book 68 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others CHANGE MODE TO USE USB: The USB cable is connected to the movie camera in Card Recording Mode. DISCONNECT USB CABLE: You are attempting to turn the mode dial in PC Connection Mode with the USB cable connected to the movie camera. You are attempting to record pictures on a tape/card with the USB cable connected to the movie camera. NO INK IN PRINTER: There is no ink. Check the connected printer. NO PAPER IN PRINTER: There is no paper.
VQT1L48_ENG.book 69 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others Before requesting repair (Problems and solutions) Power/Body 1: The movie camera power cannot be turned on. • Is the battery fully charged? Use a fully charged battery. • The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the movie camera still cannot be used, the battery is faulty.
VQT1L48_ENG.book 70 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others Recording 1: Recording does not start although power is supplied to the movie camera and the cassette is correctly inserted. • Is the accidental erasure prevention slider on the cassette open? If it is open (set to [SAVE]), recording cannot be performed. (-15-) • Is the tape wound to the end? Insert a new cassette. • Is the recording mode set? When in the playback mode, recording cannot be performed.
VQT1L48_ENG.book 71 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others • Is the variable speed search function working? Press the [VAR SEARCH] button on the remote control to cancel the variable speed search function. (-40-) Playback (Pictures) 1: Although the movie camera is correctly connected to a TV, playback images cannot be seen. The images are vertical.
VQT1L48_ENG.book 72 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others 3: Even if connected by the USB cable, the movie camera is not recognised by the PC. • Is the USB driver installed? -534: When the USB cable is disconnected, an error message will appear on PC. • To disconnect the USB cable safely, doubleclick the [ ] ( ) icon in the task tray and follow the instructions on the screen. 5: The movie camera malfunctions on editing, dubbing from digital video equipment, or using “MotionDV STUDIO 6.
VQT1L48_ENG.book 73 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others ª About dirty heads If video heads (the parts that closely contact with the tape) become dirty, normal recording and playback are not properly performed. Clean the heads with the digital video head cleaner. ≥Insert the head cleaner into the movie camera, set it to the Tape Playback Mode, and play it back for about 10 seconds. (If you do not stop the playback, it automatically stops about 15 seconds later.
VQT1L48_ENG.book 74 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others While carrying the movie camera, do not drop or bump it. ≥A strong impact on the movie camera may break its housing, causing it to malfunction. Do not use benzine, paint thinner or alcohol for cleaning the movie camera. ≥Before cleaning, detach the battery or pull out the AC mains lead from the AC mains socket. ≥The camera body may be discoloured and the surface finish may peel off.
VQT1L48_ENG.book 75 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others ª About the AC adaptor ≥If the battery is warm, charging requires more time than normal. ≥If the temperature of the battery is extremely high or extremely low, the [CHARGE] lamp may continue flashing, and the battery may not be charged. After the battery temperature has decreased or increased sufficiently, recharging starts automatically. So, wait for a while.
VQT1L48_ENG.book 76 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others ª LCD monitor/viewfinder LCD monitor ≥When the LCD monitor gets dirty, wipe it with a dry soft cloth. ≥In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. ≥If your movie camera is extremely cold, the LCD monitor is slightly darker than usual immediately after you turn the power on. However, as the internal temperature increases, it goes back to normal brightness.
VQT1L48_ENG.book 77 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Others ª White balance The image recorded by the movie camera may become bluish or reddish under the influence of light sources. To avoid such phenomena, adjust the white balance. White balance adjustment determines the white colour under different light sources. By recognizing which is the white colour under sunlight and which is the white colour under a fluorescent lamp, the movie camera can adjust the balance among the other colours.
VQT1L48_ENG.book 78 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Specifications Specifications Specifications Digital Video Camera Information for your safety Power source: DC 7.9/7.2 V Power consumption: Recording 5.2 W Recording format: Mini DV (Consumer-use digital video SD format) Tape used: 6.
VQT1L48_ENG.book 79 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Specifications AC adaptor VSK0651 Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 19 W DC output: DC 7.9 V, 1.4 A (Movie camera operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions: 61 mm (W)t32 mm (H)t91 mm (D) Mass: Approx. 110 g Specifications may change without prior notice. Maximum number of still pictures recordable on an SD Card (optional) 16:9 mode: PICTURE SIZE 1 ¢ PICT.
VQT1L48_ENG.book 80 ページ ２００７年１２月１１日 火曜日 午後４時５５分 A VQT1L48 F1207RA0 ( 500 A) Matsushita Electric Industrial Co., Ltd. Web site: http://panasonic.
