Digital Video Camera Operating Instructions

35
ª Automatically Copying Still Pictures That Have Already
Been Recorded on a Tape
The images with the Photo Index signals are automatically recorded to the
Card.
1
Set the Movie Camera to Still Playback Mode at the scene
immediately before you want to start copying images.
2
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[RECORD TO CARD] >> [YES].
≥During copying, the Indication
1
appears.
≥Search starts from the current Tape position, and images with Photo
Index signals are recorded onto the Card sequentially.
To Stop Automatic Recording
Press the [∫] Button.
≥For other notes concerning this item, see page 45.
~~~~~~~~~~~~~~~~~~~~~~~~~
Recording Pictures on a Card to a Tape
Card Images can be recorded on the Tape one at a time or all automatically.
To Copy 1 Picture
1
Slide the [TAPE/CARD] Selector towards [TAPE].
2
Display a desired picture.
3
Press the [PHOTO SHOT] Button.
≥During the copying, the Indication
1
appears.
≥It takes a few seconds to record a picture to the Tape.
To Copy All the Pictures
1
11
1
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
2
22
2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥During the copying, the Indication
1
appears.
≥It takes a few seconds for each picture to be copy on the Tape. To stop
the copying midway, press the [∫] Button.
≥For other notes concerning this item, see page 45.
2
1
STILL
STILL
W.B/SHUTTER/IRIS/MF/VOL/JOG
MENU
MENU
FOCUS
FOCUS
PUSH
3
1
PHO
PHO
TO SHO
O SHO
T
TAPE CARD
W.B/SHUTTER/IRIS/MF/VOL/JOG
MENU
MENU
FOCUS
FOCUS
PUSH
A.book 35 ページ ２００１年７月２８日 土曜日 午前９時２７分