••••••••••••••••••••••••••••••••• Modular ICS Central Answering Position User Card ••••••••••••••••••••••••
The central answering position The Meridian Norstar* central answering position (CAP) consists of a Norstar M7324 telephone and one or two CAP modules. A CAP module is an add-on device that provides 48 extra memory or line buttons for an M7324 telephone. You can connect up to two CAP modules to an M7324 telephone. Your telephone is assigned as a central answering position by your installer or customer service representative.
Checking the pre-assigned CAP module buttons You can check what is programmed on any of your telephone or CAP module buttons. 1. 2. 3. 4. Ä¥â Ä . Press Press the buttons you want to check and read the display. Ensure that your buttons have the correct snap-on caps. when you are finished. Press Customizing your CAP module You can program any of the buttons on your CAP module that do not select lines. These buttons can be programmed to automatically dial internal or external numbers.
* Meridian and Norstar are trademarks of Nortel Networks. Meridian Norstar is manufactured by Nortel Networks. This document is for use with Norstar Modular ICS.
