Operating instructions
66
System cleaning programs
Add 100
g
of water to the
water tank. Ensure drip tray
is empty.
Make a solution of 16
g
citric
acid and 200
g
of water, add
the solution to the water tank.
Ensure drip tray is empty.
Tap auto steam 9 times until F1
Drain water program appears in
the display.
Tap auto steam 10 times until
F2 system cleaning program
appears in the display.
After the program has paused, empty
the drip tray and fi ll the water tank with
water (to max level).
Touch Start.
Empty the drip tray after
the program has fi nished.
Touch Start. The
program will run
for approx. 29
minutes.
Touch Start. The program will run for
approx. 1 minute. Empty the drip tray
after the program has fi nished.
F1. Drain water
Water is pumped through the system to clean the pipes. The water is drained into the drip tray.
F2. System cleaning
The fi rst stage of this program cleans the system with a citric acid solution. The second stage
runs water through the system to rinse the pipes.
Note
1. Only run this program with 100
g
of water in the tank.
2. Do not remove the drip tray during the drain water program. If the drip tray is removed
during the program, U12 is displayed and the program will stop.
3. Empty the drip tray and rinse with running water after the program has fi nished.
Caution
IF THE DRAIN WATER PROGRAM IS USED DIRECTLY AFTER A STEAM COOKING
PROGRAM, HOT WATER MAY BE DRAINED INTO THE DRIP TRAY.
Note
1. When appears in the display, run the ‘system cleaning’ program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the
steaming performance will be less effective.
3. Do not remove the drip tray during the drain program. If the drip tray is removed during
the program, U12 is displayed and the program will stop.
4. Empty the drip tray and rinse with running tap water after the program has fi nished.
PA_F0003BH72BP_00_140331.indd 66PA_F0003BH72BP_00_140331.indd 66 2014/4/1 9:45:382014/4/1 9:45:38