User Manual

- 58 -
Auto Steam Programs
This feature allows you to steam some of your favourite foods by setting the weight only. The oven
determines the steam level and the cooking time automatically. Select the category and set the weight of
the food. The weight is programmed in grams. For quick selection, the weight starts from the minimum
weight for each category.
Select the weight of the food by
tapping
. The weight counts
in 10 g steps. (skip this step for
programs No. 35, 36)
Tap Auto Steam
Key once.
Touch Start/Set. The display reminds
you which accessory to use and which
cooking modes are in use.
Touch Start/Set to confirm
the program. (skip this
step for programs 35, 36)
Select desired menu
by tapping
.
Note
1. The auto steam programs must only be used for foods described.
2. Only cook foods within the weight ranges described.
3. Always weigh the food rather than relying on the package weight information.
4. Only use the accessories as indicated on pages 59-60.
5. Do not cover foods on the auto steam programs.
6. Most foods benefit from a standing time after cooking on an auto program, to allow heat to
continue conducting to the centre.
7. To allow for some variations that occur in food, check that food is thoroughly cooked and piping hot
before serving.
8. If ‘HOT’ appears in the display window, the oven temperature is too high from previous use and an
auto program can not be set. Cooking mode and time may still be set manually.
9. If
flash, please fill the water tank.
F0003CH50QP.indd 58F0003CH50QP.indd 58 2020/7/16 15:14:452020/7/16 15:14:45