Operating instructions

22
0.6
1.0
Max
1.4
 Clean the appliance after every use.
 Before cleaning, unplug the mains plug, pour away the hot water, and cool the body.
Do not use soap. (This may cause a residual odour.) •
Do not use benzine, thinner, alcohol, bleach, polishing powder, metal brush or nylon •
brush, otherwise the surface will be damaged.
Do not wash in a dishwasher. •
How to Clean
Body
(Outside)
Wipe with a well-wrung cloth.
(Inside)
Rub with a soft sponge and rinse.
Scale build-up
Minerals such as calcium carbonate
contained in the water build up in the kettle.
Example of scale
Floating shiny white or brown substance •
(Mineral crystals)
Milky white roughness •
(
Substance generated by minerals
such as calcium carbonate in water.
Brown, grey or green colours •
(Due to the effects of metal ions)
Please remove the scale.
Remove it regularly using a suitable scale •
remover.
Follow the instructions supplied with the •
scale remover. After removal, repeat the
following steps a few times: fill with water,
boil, pour away.
)
Mesh Filter
Wash carefully using a brush etc.
If the spout is blocked by scale, hot •
water will pour less easily.
After cleaning, always attach it to the •
body.
How to detach
Push the filter towards to the •
spout and pull it upwards.
How to attach
Align with the groove on the •
spout and press it firmly.
Lid
Wipe with a well-wrung cloth.
Power base
Wipe with a well-wrung cloth.
To store
Dry thoroughly. •
Seal in a plastic bag to prevent insects •
etc. from entering.
Body connector
Power base
connector
NC-DK1(PZ05E669).indb 22 2016/07/04 12:47:11