® Operating Instructions & Installation Instructions Washing Machine (Domestic use) Model No. NA - 140VS4 Read Before Using SAFETY PRECAUTIONS Washing Instructions Optional Functions Maintenance Troubleshooting Installation Instructions Thank you for purchasing this appliance. - For optimum performance and safety, please read these instructions carefully. - Before connecting, operating or adjusting this appliance, please read the instructions completely. Please keep this manual for future reference.
Electrical Connection (UK and Republic of Ireland only) For your safety, please read the following text carefully. This appliance is supplied with a mould three pin mains plug for your safety and convenience. A 13-ampere fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 ampere and that it is approved by ASTA or BSI to BS1362. or the BSI Check for the ASTA mark on the body of the fuse.
Contents Read Before Using Maintenance Electrical Connection (UK and Republic of Ireland only) . . . . . . . . . . 2 SAFETY PRECAUTIONS . . . . . . . . . 4 Checking Your Washing Machine . . . 6 Maintenance . . . . . . . . . . . . . . . . . . 24 Your washing machine . . . . . . . . . . . . . 6 Accessories . . . . . . . . . . . . . . . . . . . . . 6 Before You Start Washing . . . . . . . . 7 Checking before use . . . . . . . . . . . . . . 7 Before initial use . . . . . . . . . . . . . . . . . .
SAFETY PRECAUTIONS Please read and follow these safety precautions. WARNING This describes issues which could cause death or serious injury. General Use -- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
SAFETY PRECAUTIONS To Prevent Injury -- The installation of the appliance should be done by the manufacturer’s dealer or service agent. If the installation, test run and inspection of the appliance are not carried out following the installation method outlined in these instructions, the manufacturer will not be liable for any accident or damage caused. -- Do NOT dismantle, repair or modify the appliance. There is a possibility the appliance may malfunction which may result in a fire or an injury.
Checking Your Washing Machine Your washing machine Detergent drawer (see page 10) Drum (Washing/ spin-drying tub) Door seal Door Mains lead/ Mains plug Water-drain hose Adjustable stands (see page 35) Drain filter cover (see page 25) Caution Do NOT bend the mains lead when the appliance is running. Accessories Cover cap (x4) (see pages 34-35) Make sure that all the accessories are supplied with the appliance.
Before You Start Washing Checking before use For the appliance’s initial operation or after a prolonged period of non-operation, perform the following procedures: -- You should put bras with metal wires, tights, lace clothing and small items of clothing into a laundry net to prevent them or the appliance from getting damaged. 1. Secure the water-supply hose. 2. Open the tap. 3. Connect the power. 4. Make sure that the water-drain hose is positioned towards a drain. For more details, see page 37.
Using the Buttons 15ºC Wash Was Cotton Steam Wrinkle-care Quick 50 Allergy-care Rapid 15 Shirts Shirt Daily Easy-care Speed Eco Delicates Refresh Bedding Colours Colour Start/Pause Mixed Mixe Sportswear Wool 8 7 6 5 4 3 2 1 1. Power buttons - If you do not press the Start button within 10 minutes after the appliance has been switched on, the appliance automatically switches itself off. 5.
Using the Buttons Unlocking the door The door automatically locks while in use, and the symbol is shown while the door is locked. A click will be heard when the door locks or unlocks. 11 10 9 9. Process indicator - This indicator shows the current process of the programme. The process consists , spin , and drain of wash , rinse . - The light goes off when the wash is finished. 10. Remaining time indicator - This indicator shows the approximate time until the washing finishes.
Adding Detergent and Other Chemicals Pull out the detergent drawer and add detergent or softener to the correct compartment. Check the packages for the appropriate recommended amounts. Caution Do NOT use the appliance when the detergent drawer is removed. This may result in a water leak.
Adding Detergent and Other Chemicals 2. Powdered detergent Detergent reaches the drum only when water flushes through the detergent drawer. Thus, if you forget to add detergent, run the Drain only function using the Mode button. Then, add detergent and start washing again. To prevent powdered detergent from remaining in the drawer, perform the following: -- Dry the inside of the drawer with a cloth. -- Make sure that the detergent is not lumpy when you add it as this may cause a blockage over time.
Washing Setting washing 15ºC Wash Was Cotton Steam Wrinkle-care Quick 50 Allergy-care Rapid 15 Shirts Shirt Daily Easy-care Speed Eco Delicates Refresh Bedding Colours Colour Start/Pause Mixed Mixe Sportswear Wool 4 1. Open the door and put the laundry into the drum. For details about preparing and sorting the laundry, see pages 7, 16, and 17. Caution - Make sure to place the laundry within the drum so that it does not get caught in the door.
Washing Caution Setting the buzzer After a high temperature wash, be careful to not burn yourself when handling the laundry or touching the inside of the drum. The buzzer that sounds when a programme finishes can be turned off. Note 2. Release the On button and keep pressing the Start button for 3 seconds. The buzzer setting will be turned off after a beep is heard. If you wish to reset the setting, perform the same steps 1 and 2. The buzzer setting will be turned on after two beeps are heard.
Washing Steam programme Caution BE CAREFUL The metal ring might be hot after using a Steam programme. Metal ring Shirts programme The Steam effects that take place during the spin-drying cycle that follows the dedicated Shirts washing cycle helps to reduce wrinkles in clothing. Washable -- Cotton and cotton blend at shirts and blouses – 2 kg or less Daily programme Note --When temporarily halting a Steam programme, if the inside of the drum is hot, the door will not open.
Washing Refresh programme Use of the dedicated Steam programme will help to lessen odours in clothing. Washable -- Dry items only – 1.5 kg or less Non washable -- Delicate clothes like wool and silk Note --Smaller loads give a better result. --If you set a Steam programme with dry laundry, at the end of the cycle the laundry will feel humid. The items may need to be dried. --Remove items as soon as the programme has finished and dry them on hangers.
Selecting the Programme Programme Description 140VS4 Max load Cotton Daily wash for cotton, linen and cotton blends. 10 kg Wrinkle-care Reduces wrinkles in dry clean garments or freshly washed and spun garments, using steam. 1.5 kg Allergy-care Cycle to remove allergens such as dust mites and pollen, using steam. 5 kg Shirts Wash to tackle collar and cuff grime on shirts/ blouses to prevent creasing, using steam.
Selecting the Programme Programme 140VS4 Max load Description Wool Gentle wash for hand and machine washable wool and wool blend clothes preventing clothes shrinkage. 2 kg Sportswear For washing synthetic sportswear. 3 kg Bedding For washing large items such as bed sheets. 3 kg Delicates Gentle wash for synthetic fibre, satin, lace etc. preventing damage. 5 kg Easy-care Gentle wash for cotton, linen and synthetic fibres. 5 kg Rapid 15 15 min.
Details of Programmes Auto setting Programme Approximate time Temperature Number of rinses Spin-dry revolutions 40 °C 2 1200 1:10 - 2:05 Wrinkle-care ― ― ― 0:35 Allergy-care 60 °C 3 1200 2:09 - 2:34 Shirts 40 °C 2 500 1:34 Daily 40 °C 2 1200 1:27 Refresh ― ― ― 0:25 Colours 40 °C 2 1200 0:58 - 1:23 Mixed 40 °C 2 1200 1:09 - 1:44 Wool 30 °C 3 500 0:40 Sportswear 40 °C 2 800 1:30 Bedding 30 °C 2 800 1:02 Delicates 40 °C 2 800 0:55 - 1:00 Easy-care
Details of Programmes Manual setting Temperature Spin-dry revolutions 140VS4 Additional functions Eco Speed Extra Rinse Prewash Easy Ironing Cold - 90 °C 500 - 1400 ― ― ― ― ― ― 60 °C 500 - 1200 ― 500 - 800 Cold - 90 °C 500 - 1200 ― Cold - 60 °C ― ― ― ― ― ― Cold - 40 °C 500 - 1400 Cold - 40 °C 500 - 1400 Cold - 40 °C 500 ― ― ― Cold - 40 °C 500 - 1200 Cold - 40 °C 500 - 800 ― Cold - 40 °C 500 - 800 ― Cold - 60 °C
Washing Delicates Wool and Delicates programmes The drum spins gently in these programmes. For details about washing instructions, see pages 12-13. Delicate laundry loads -- Wool programme: 2 kg or less -- Delicates programme: 5 kg or less Hanging the laundry -- Hang out white or light-coloured wool and nylon items away from direct heat or sunlight. -- After washing, lay out wool and nylon clothes, and return them to their normal shape before hanging in the shade. This saves on ironing too.
Washing Bedding Bedding programme -- Make sure that the label of each item to be washed shows either the wash or handwash symbol ( , ). -- Wash only one blanket at a time. Washable -- 100 % synthetic fibre blankets – up to 3 kg -- 100 % synthetic fibre futons and 100 % cotton blankets – up to 1.5 kg (single bed size) -- Sheets -- Bedspreads -- 100 % synthetic fibre undersheets Caution Do NOT roll blankets or bedspreads into balls, nor haphazardly fold them.
Optional Functions Individual washing functions Additional functions (Process selection) Depending on the programme, you can combine different additional functions. You can select a single process, or combine several processes by selecting individual washing functions. Note You cannot select individual washing functions, Allergy-care, Daily and Shirts in the Rapid 15 programme. Press the Mode button a function.
Optional Functions You can activate or deactivate the Extra Rinse and Easy Ironing functions during a washing process but not after it has finished. Some additional functions cannot be used with certain programmes. (See pages 1819.) Preset timer You can use the timer to preset the time for when the washing finishes. -- You cannot preset the Wool programme.
Maintenance Cleaning the outside of the appliance Cleaning the detergent drawer Clean the outside of the appliance with a soft cloth and mild detergent, for example, kitchen detergent, and soapy water. Detergent residue soon builds up if the detergent drawer is not cleaned regularly. Detergent build up may develop mould. Warning --Do NOT splash water over the appliance. 1. Pull out the detergent drawer.
Maintenance 5. Align the hole of the softener cover with the click of the detergent drawer to replace the softener cover back to the original position. Then, insert the detergent drawer back to the main unit. 3. Pull out the pump hose and remove the cap to drain the water. 4. After all the water has drained away, loosen the drain filter. Cleaning the door seal and window After each wash, perform the following: -- Remove any objects from the door seal. 5. Carefully loosen the drain filter.
Maintenance Cleaning the water-supply filter 8. Reconnect the water-supply hose. Tighten the plastic joint firmly. Clean the filter if water is not supplied properly. 9. Turn on the tap, then check for leaks. 1. Turn the tap off. 2. Switch on the appliance. 3. Select the Cotton programme, and then press the Start button. 4. After 1 minute, switch off the appliance. Water has drained out of the water-supply hose. 5. Disconnect the water-supply hose from the appliance. 6.
Fault Checklist Problem Buttons do not work. Cause Washing machine --The programme, temperature and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). --Child safety lock may be activated. (See page 23.) Door does not open. --Door lock may be activated. (See page 9.) --Child safety lock may be activated. (See page 23.) --The water temperature or level may be too high.
Fault Checklist Problem Cause No water flows into the appliance during the rinsing process. --Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that. Rinsing begins before the spin process finishes. --The appliance may have detected an unbalanced load, which is caused by the laundry shifting to one side of the drum, so rinsing started automatically to correct the imbalance.
Fault Checklist Problem There is no foam or hardly any foam. Cause --The amount of foam varies, depending on the temperature, level and softness of the water. --You may have put powdered detergent directly into the drum; you must put it in the detergent drawer. --You may not be using enough detergent. --You may be using a reduced-foam type of detergent. Detergent and foam --Heavily soiled laundry and larger loads of laundry may reduce the amount of foam. There is a lot of foam.
Fault Checklist Problem Cause Others The electricity supply cuts out while the appliance is on. --The appliance stops, and will not start by itself when the power comes back on. You have to select a programme and start it again. A circuit breaker trips the electricity supply. --The appliance stops, and will not start by itself when you reset the breaker. You have to find out what caused the breaker to trip and solve it.
Error Display What to do Unable to drain Check the drain hose for any of following problems. -- It clogs up. -- Its tip is immersed in water. -- It extends further than 3 m. -- The water is frozen. Clean the drain filter if it clogs up. (See page 25.) After correcting the problem, open the door, close it, and then start the wash again. What to do Door is open Make sure that the door is shut properly.
Choosing the Right Location Carrying the appliance The appliance must be carried by 2 or more people. Caution --Install the appliance on a flat, stable surface to avoid excessive vibration and noise. --Do NOT install the appliance in direct sunlight or in a place where temperatures reach freezing. Start by tilting the appliance backwards. One person should stand behind it, holding the rear of the top panel. The other person should grip the bottom stands in the front.
Choosing the Right Location Installing a built-in washing machine - You need a space at least 60 cm wide. At least 2 mm of clearance on the sides, and 3 mm of clearance above and behind the appliance are required. - The counter above the appliance must be firmly fixed to the adjoining cupboards. - Instead of the standard cover panel, have a technician install a metal cover. - You need to have the plug accessible after installation.
Moving and Installing Removing the anchor bolts Four anchor bolts keep the interior of the appliance in place while the appliance is being moved. Remove them before installation, using the spanner that is supplied with the appliance. Follow the following instructions. Note The anchor bolts must be removed before the appliance is operated. They may cause excessive vibration. 3. Remove the screws, which are next to the bolt holes. 4.
Moving and Installing Installing the anchor bolts 1. Unscrew and remove the cover caps. Levelling the appliance Using a level facilitates the making of adjustments. To adjust the stands, use the ‘A’ end of the spanner. A 2. Pull the bolts out until their tips are level with the tips of the sleeves. Have someone else hold the top of the drum and pull it forward. B Same level Lock nut Stand 3. Insert the transportation guards. 1. On each stand, loosen the lock nut by turning it clockwise. 2.
Connecting Hoses and Power Supply Follow the instructions in this section to prevent water leaks. If you are unsure, ask a service agent to connect the hoses. Hoses and cable lengths Left side connections ~ 130 cm ~ 100 cm Water-supply hose Caution --Do NOT connect the water-supply hose to a combination tap. ~ 135 cm ~ 90 cm 0 – max. 100 cm ~ 105 cm Right side connections ~ 140 cm Connecting the water-supply hose 1.
Connecting Hoses and Power Supply Leak-proof System The appliance is installed with the system that is designed to prevent water leaks. The system includes the following components. 1) Leak sensor This sensor will cease operation of the appliance if it detects any leaks. It is located on the base plate of the appliance. If a leak has been detected, an error display starting with H, for example, H 01, will appear. In that case, contact your local Customer Communications Centre.
Checking After Installation Installation checklist 3 7 1 5 6 5 6 4 2 5 6 1) Anchor bolts Have you removed them and attached the cover caps properly? 5) Adjustable stands Are they bolted securely to the appliance? 2) Location Is the appliance on a flat, stable surface? Does it run without vibrating? 6) Stand cushions Are they standing flat? If the appliance is not level, there may be abnormal sounds when water is drained out.
Checking After Installation Test run after installation Check for water leakage, abnormal noise, and proper drainage. Perform the following procedures WITHOUT laundry in the drum. 1. Turn on the tap. 2. Close the door. 3. Please spin after moved this washing machine. Press the On button. You have to select “Quick 50” course and “Spin” mode. Then press the “Start ” button. After the water is drained, start a test run. 4. While holding down the Speed/Eco and Easy Ironing buttons, press the On button.
Power and Water Consumption Temperature Additional function Load 40 °C ― 10 kg 1.05 kWh 90 L 2:05 40 °C 1) Eco 5 kg 0.57 kWh 50 L 2:45 60 °C 1) Eco 10 kg 0.85 kWh 63 L 3:45 5 kg 0.72 kWh 50 L 3:05 Wrinkle-care ― ― 1.5 kg 0.21 kWh ― 0:35 Allergy-care 60 °C ― 5 kg 1.94 kWh 98 L 2:34 Shirts 40 °C ― 2 kg 0.52 kWh 31 L 1:34 Daily 40 °C ― 2 kg 0.65 kWh 40 L 1:27 ― ― 1.5 kg 0.20 kWh ― 0:25 Wool 30 °C ― 2 kg 0.
Consider the Environment Disposing of packaging The packaging used to protect the washing machine from damage during transportation is all recyclable. For information on recycling, contact your local authority. Disposing of Waste Electrical & Electronic Equipment Information on disposal for users of waste electrical & electronic equipment (private households) Information on disposal in other countries outside the European Union This symbol is only valid in the European Union.
Specifications NA - 140VS4 Rated voltage 220 - 240 V Rated frequency 50 Hz Maximum energy rated power input 2000 - 2350 W Wash 2000 W (230 V) Steam 1000 W (230 V) Heating energy rated power input Power consumption Off-mode / Left On-mode Maximum spin speed 0.2 W 1400 r/min Remaining moisture content 53 % Product weight 74 kg Maximum mass of dry cloth 10 kg Product dimensions 596 mm (W) × 625 mm (D) × 845 mm (H) Water consumption Refer to “Power and Water Consumption”.
NA-140VS4_English.
Customer Communications Centre Fridge-Freezer and Washing Machine Please note, we are unable to assist with calls regarding Audio Visual and other Home Appliance products on this line. Monday to Friday 9:00 - 17:00 Excluding public holidays. 0844 844 3899 Monday to Friday 9:00 - 17:00 Excluding public holidays. (For Republic of Ireland) If calling from the Republic of Ireland, please call 01 289 8333 Web Site: http://panasonic.
