Datasheet

SR-DSV10739− 25-26 −
MINAS-A5 Vol.1 Motor Business Unit, Appliances Company, Panasonic Corporation.
12. Others
- Precautions for export of this product and the equipment incorporating this product
If the end user or end purpose of this product relates to military affairs, armament and so on, this product may be
subject to the export regulations prescribed in "Foreign Exchange and Foreign Trade Control Law".
To export this product, take thorough examination, and follow the required export procedure.
- We cannot warrant this product, if it is used beyond the specified operating conditions.
- Compliance with the relevant standards should be considered by the user.
- The final decision on the compatibility with the installations and components at the user's site, in terms of structure,
dimensions, characteristics and other conditions should be made by the user.
- If the user selects the servo motor and amplifier for user machine, the user shall pay deep attention to matching
servo motor and driver to his machine.
- For performance improvement or other reasons, some components of this product may be modified in a range that
satisfies the specifications given in this document.
- Any specification change shall be based on our authorized specifications or the documents presented by the user.
If a specification change may affect the functions and characteristics of this product, we will produce a trial product,
and conduct examination in advance.
Note that the produce price may be changed with a change in its specifications.
- We have made the best efforts to ensure the product quality. However, complete equipment at customer’s site may
malfunction due to a failure of this product. Therefore, take precautions by providing fail-safe design
at customer’s site, and ensure safety within the operating range of the work place.
- Depending on the malfunction of this product, it may generate smoke of about one cigarette.
Take this into consideration when the application of the machine is used in clean room etc.
- If the equipment is operating without connection of the motor shaft electrically to the ground,
electrolytic corrosion occurs at the motor bearing and it may result in a high bearing noise depending on
equipment or installing conditions. The user shall verify and inspect the equipment.
- Be careful that using the equipment under the environment with high concentrations of sulfur or sulfated gases,
leads to the disconnection from the chip resistor and/or a bad contact connection.
- Take care to avoid inputting a supply voltage which significantly exceeds the rated range to the power
supply of this product. If it exceeds the rated range, it may result in the damage to the internal parts, causing
fuming and/or ignition etc...
- Please adequately dispose of the battery to be insulated by using a tape, in accordance with each country and
each local regulation and law.
- Please dispose of the equipment as the industrial waste.