Datasheet

SX-ZSV00007 - 14 -
Motor Business Division, Appliances Company, Panasonic Corporation
6-5 Front panel
■Configuration of Front panel
■Rotary switch(RSW)
By manipulating the RSW、Pr.0.03(selection of stiffness at real-time auto-gain tuning) was corrected by setting the
RSW, and can be changed from the front panel gain control.
RSW setting
The stiffness
correction
Example)Pr0.03=8
Parameter Pr0.03 is
changed
Stiffness after
correction
LED Display
PC ±0 8 Pc Possible
+1
＋1
9 9
Impossible
+2
＋2
10 10
+3
＋3
11 11
+4
＋4
12 12
+5
＋5
13 13
+6
＋6
14 14
+7
＋7
15 15
- ±0 8 8
-7
－7
1 1
-6
－6
2 2
-5
－5
3 3
-4
－4
4 4
-3
－3
5 5
-2
－2
6 6
-1
－1
7 7
■Operation method
When power is turned on after the show check pattern, and displays the following normal.
If you operate the RSW, LED displays a real-time stiffness after adjustment for the RSW.
However, in the event that an alarm occurs, alarm codes (main and sub) display.
・During warnings occur, the display will flash slowly.
・
When an error occurs, the display switches to cause an error with flashing numbers.
・Rotary Switches is a length of 4mm and a width of 1mm ,so flat-blade screwdriver to set the rotary switch that is
less than 4mm in width and thickness of 1mm or less.