Datasheet

№SR-ZSV00039 － 11 －
Motor Business Unit, Appliances Company, Panasonic Corporation
3－2 7 segment LED
At power-up after displaying the check pattern, perform the following normal display.
If you operate the front RSW will show the real-time stiffness value of RSW after adjustment for the front.
However, when an alarm occurs when an alert will display a warning code, the alarm code (main + sub)。
Control power ON
All di
s
play
Dot display
Servo-on command
Servo-off command
（riht dot：main power OK）
（left dot：motor electrified）
Alarm occur Alarm clear
Servo-off state
[－－]
< Alarm>
The main code and sub-code(+left dot) of alarm
code(algorism) display alternantly.
（For example:overload）
Main code
Sub-code
(＋left dot)
Warning occur
latch：settle problem＋alarm clear
No latch:settle problem
< Warning >
Warning code(hex) and normal state display
alternantly. Left dot flash while warning occur.
（For example:overload）
Warning code（about 2s）
Left dot flash
Normal(about 4s)
[８８] display
Panel RSW
operate
RSW=0
confirm(2s)
RSW except 0
confirm(2s)
Panel RSW
operate
RSW operating
RSW confirm
＜Normal ＞
Panel RSW priority indicate (RSW≠0)
Servo on／off state is displayed by character。
Set the stiffness by using computer(PANATERM).
LED displays a real-
time stiffness in
algorism after adjustment for the
RSW. It can not be set by computer.
Servo-on state
[Ｐｃ]
Priority display of PANATERM and panel RSW is decided by the vaule of RSW.
The display of right dot means main power OK. The diplay of left dot means motor electrified.
Decimal indicate：
（right dot：main power OK）
＜PANATERM priority indicate(RSW＝0)＞