Datasheet

FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
PARTICULAR
USE
SENSORS
EX-F70 /
EX-F60
Selection
Guide
Wafer
Detection
HD-T1
M-DW1
EX-F1
LX-100
FZ-10
NA1-11
Metal-sheet
Double-feed Detection
GD
Other
Products
Liquid Leak
Detection
Liquid Level
Detection
Color Mark
Detection
Small / Slim
Object Detection
LX-100
Color Mark
Detection
Digital Mark Sensor LX-100 SERIES
754
Type Cable type Plug-in connector type
Model No.
NPN output LX-101 LX-101-Z
Item PNP output LX-101-P LX-101-P-Z
Sensing range 10 ± 3 mm 0.394 ± 0.118 in
Spot size 1 × 5 mm 0.039 × 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption
Normal mode: 750 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
Output 1
(OUT)
<NPN output type>
NPN open-collector transistor
Maximum sink current: 50 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1.5 V or less (at 50 mA sink current)
<PNP output type>
PNP open-collector transistor
Maximum source current: 50 mA
Applied voltage: 30 V DC or less (between output and +V)
Residual voltage: 1.5 V or less (at 50 mA source current)
•
•
•
•
•
•
<NPN output type>
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1.5 V or less (at 100 mA sink current)
<PNP output type>
PNP open-collector transistor
Maximum source current: 100 mA
Applied voltage: 30 V DC or less (between output and +V)
Residual voltage: 1.5 V or less (at 100 mA source current)
•
•
•
•
•
•
Short-circuit protection Incorporated
Output operation
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching), Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2
(OUT)
<NPN output type>
NPN open-collector transistor
Maximum sink current: 50 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1.5 V or less (at 50 mA sink current)
<PNP output type>
PNP open-collector transistor
Maximum source current: 50 mA
Applied voltage: 30 V DC or less (between output and +V)
Residual voltage: 1.5 V or less (at 50 mA source current)
•
•
•
•
•
•
–
Short-circuit protection Incorporated
–
Output operation Inverted operation of the output 1
–
Response time Mark mode: 45 μs or less, Color mode: 150 μs or less
Teaching input
<NPN output type>
NPN non-contact input
Signal condition: High… +5 V to +V, or open
Low… 0 to +2 V
(source current: 0.5 mA or less)
Input impedance: 10 kΩ approx.
•
•
<PNP output type>
PNP non-contact input
Signal condition: High… +4 V to +V
(sink current: 3 mA or less)
Low… 0 to +0.6 V, or open
Input impedance: 10 kΩ approx.
•
•
Digital display 4-digit red LED display
Sensitivity setting Mark mode: 2-level teaching / Full-auto teaching, Color mode: 1-level teaching
Fine sensitivity adjustment function Incorporated
Timer function Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)
Environmental resistance
Protection IP67 (IEC) (Refer to p.984 for details of standards.)
Ambient temperature –10 to +55 °C
+14 to +131 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3.0 mm
0.118 in amplitude (max. 20 G) in X, Y and Z directions for two hours each
Shock resistance 500 m/s
2
acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm
0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Material Enclosure: PBT, Display cover: Polycarbonate, Operation buttons: Silicone rubber, Lens: Glass, Lens holder: Aluminum
Cable 0.34 mm
2
5-core cabtyre cable, 2 m 6.562 ft long (Note 2)
Cable extension Extension up to total 100 m
328.084 ft is possible with 0.3 mm
2
, or more, cable.
Weight Net weight: 120 g approx., Gross weight: 180 g approx. Net weight: 55 g approx., Gross weight: 120 g approx.
Accessory M4 (length 30 mm
1.181 in) screw with washers: 2 pcs.
SPECIFICATIONS
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) Mating cable is not supplied with the plug-in connector type. Please order it separately.