Bluetooth Module Datasheet Model No.型号:TBM-QCC307 版本 Version：V1.0 公布日期 Release Date: 2016-03-08 TONLY ELECTRONICS HOLDINGS LIMITED.通力电子控股有限公司 Address:Section 37, Zhongkai Hi-tech Development Zone, Huizhou Guangdong 516006, P.R.China 地址：中国广东省惠州市仲恺高新区惠风 6 路 37 号小区 网址 http://www.tonlyele.
©2015 TONLY ELECTRONICS HOLDINGS LIMITED.All rights reserved 保留所有版权 法律声明 Legal Notice, Disclaimer, Copyright 本手册是通力电子控股有限公司机密，未经能力电子控股有限公司的事先书面许可，任何人不得复 制、传播本手册的内容。通力电子控股有限公司不对由于使用本手册或执行本手册内容带来的损害负责。 本手册所涉及的知识产权归通力电子控股有限公司所有（或经合作商授权许可使用） ，任何人不得侵 犯。 本手册是按当前状态提供参考，本公司司保留随时更新本手册的权利,恕不另行通知。 本手册不对包括但不限于下列事项担保：适销性、特殊用途的适应性;实施该用途不会侵犯第三方的 知识产权等权利。 本文档在此未以禁止反言或其它方式授予任何知识产权使用许可，不管是明示许可还 是暗示许可。 本手册中提到的所有商标名称、商标和注册商标均属其各自所有者的财产，特此声明.
TBM-QCC307 Bluetooth Module Datasheet 版本变更说明 Document Revision History Revision Date Author Checked by Description 版本 日期 作者 审核 描述 V1.0 3 2018-8-18 huangzisheng liweixiong First release.
目录 Table of Contents 法律声明 Legal Notice, Disclaimer, Copyright 文档变更说明 Document Revision History 目录 Table of contents 1.系统概览 System overview 1.1 通用说明 General Descriptions 1.2 性能特点 Features 1.3 系统方框图 Block Diagram 2.产品描述 Production Description 引脚与功能说明 Pin Layout & Pin Description 外观与尺寸 Appearance& Dimension 3.应用说明 Application Explanation 4.电气特性 Electrical Characteristics 工作条件 直流特性 DC characteristics 热特性 Thermal characteristics 电流消耗 Current consumption 5.
TBM-QCC307 Bluetooth Module Datasheet 1. 系统概览 System overview 1.1 通用说明 General Descriptions The QCC3007 module is a single-chip flash programmable dual mode Bluetooth v5.0 device with integrated application processor, low-power audio DSP, on-chip ROM and RAM, stereo codec, battery charger, switch-mode and linearregulators, and LED drivers. 1.2 性能特点 Features Bluetooth ® v5.
Physical Dimensions Pin descriptions PIN NO. Symbol Description Function GND Power supply and control Ground connections.
TBM-QCC307 Bluetooth Module Datasheet 25 、 30 、 33 、 37 、 47 、 58 AIO0 2 Bi-directional with programmable Analogue analog I/O. I/O A CMOS output with a weak internal pull-up. This pin can be used UART_RTS 5 to implement RS232 hardware flow control where RTS (request to send) is an active low indicator. The UART interface requires an external RS232 transceiver chip. UART_CTS 6 Programmable UART request to send, active low Alternative function: PIO16: Programmable input / output line 16.
SPI MISO selected by SPI_PIO#. Programmable I/O line or debug 15 SPI_MOSI SPI SPI data output MOSI selected by SPI_PIO#. Programmable I/O line or debug 16 SPI_CLK SPI SPI CLOCK CLK selected by SPI_PIO#. Programmable I/O line or debug 17 SPI_CSB SPI chip select (CSB) selected by chip select for SPI, active low SPI_PIO#. The RESET pin is an active high reset and is internally filter educing the 20 RESET internal low frequency clock oscillator .A reset will be performed between1.5 and 4.
TBM-QCC307 Bluetooth Module Datasheet boost. Otherwise leave unconnected. Battery charger sense input. VBAT_SENSE 28 Power supply and control Connect directly to the battery positive pin. VBAT 29 Input for an internal switched mode 1.8V regulator Battery charger input combined with output of the internal battery charger. 31 1.8V_OUT Power supply and control 32 VDD_IO Power supply and control 1.8V DC/DC convertor output. Positive supply input for input/output ports. 3.
48 BIAS Microphone bias 49 LINE_AN Microphone bias Line or microphone input negative, channel A Analogue in 50 LINE_AP 51 LINE_BN Line or microphone input positive, channel A Line or microphone input negative, channel B Analogue in 52 LINE_BP 53 AGND 54 SPK_RN Line or microphone input positive, channel B Analogue Connect Analog Ground pins connections.
TBM-QCC307 Bluetooth Module Datasheet Operating temperature -40 85 °C VDD_IO 1.7 3.6 V VDD_BAT 2.8 4.4 V VDD_CHG 0 5.5 V Terminal voltages 0 VDD V Item Min Type Max Input Voltage 4.5 5 5.75 V Charge Current(CC mode) 194 200 206 mA 电池充电 Battery charger Unit Trickle Charge Current 10 mA Trickle Charge Threshold Voltage 2.92 V Regulated Output(Float)Voltage 4.
Analogue Gain Analogue Gain Resolution=3dB Output voltage full scale swing(differential) -21 - THD+N100kΩ load THD+N16Ω load - 0 - 778 mVrms - 5.射频性能 RF Performance Specification Description RF performance Standard Bluetooth 5.0 Frequency Band 2.402~ 2.48GHz Modulation Method GFSK；4/ΠDQPSK;8DQPSK Maximum Data Rate 1 Mbps/2 Mbps/3 Mbps Antenna External antenna Interface UART, PIO, AIO, SPI,PCM,SPI Operation Range >=10 meters(Free Space) Sensitivity -86dBm at 0.
TBM-QCC307 Bluetooth Module Datasheet 600Pcs per every Vacuum packing 8.环保声明 Green Policy This module can meet ROHS&REACH compliance.XXXX 9.推荐过炉温度 RECOMMENDED TEMPERATURE REFLOW PROFILE The soldering profile depends on various parameters necessitating a set up for each application. The data here is given only for guidance on solder re-flow. There are four zones: 1. Preheat Zone - This zone raises the temperature at a controlled rate, typically 1-2.5°C/s. 2.
Key features of the profile: ■ Initial ramp = 1-2.5°C/sec to 175°C ±25°C equilibrium ■ Equilibrium time = 60 to 180 seconds ■ Ramp to maximum temperature (245°C) = 3°C/sec max. ■ Time above liquidus temperature (217°C): 45-90 seconds ■ Device absolute maximum reflow temperature: 260°C 10.
For FCC: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
