Information

7
Other useful functions
Indicates desired values and letters
Setting details can be recognized at a glance
The DP-100 setting details appear in the digital display. Because
the settings are in numeric form that can be easily understood, it is
useful such as when receiving technical support by telephone.
1st digit: Setting status for
comparative output 1
5th digit: Response time
setting
6th digit: Display unit setting
7th digit: Display refresh rate setting
8th digit: ECO mode setting
2nd digit: Setting status for
comparative output 2
3rd digit: Threshold value setting
4th digit: Display color setting
The code on the main display is 3205.
The sub display shows 7011.
What are the check
codes for the setting?
Cable can be connected with one-touch
Connector attached cable (2m 6.562 ft), as an accessory, can be
connected easily with one-touch connection.
Ɣ Types without connector attached
cable are also available
Commercially-available connectors can be used for cable
connections. Cables in required length can be used, so this
contributes to reduction in waste of unwanted cables.
Connection cable *
DP-10Ƒ-J
Environmentally
friendly
Sub display can be customized
The sub display can be set to indicate any other desired values or
letters apart from the threshold value. This eliminates the need for
tasks such as affixing a label to the device to indicate the normal
pressure value.
* Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft
types are also available.
Commercially-available
parts can be used!
Commercially-available
parts can be used!
<Desired letter display><Unit display><Number display>
Ɣ M8 plug-in connector types are also available (Only for Europe)
M8 connector
G
1
/8 male thread
M5 female thread
Mating cable
CN-24A-C2 (cable length 2 m 6.562 ft)
CN-24A-C5 (cable length 5 m 16.404 ft)
DP-11Ƒ-E-P-J