Datasheet

Single Fiber Bi-Directional
Transceivers Low Profile
One-Way Video With Reverse
Panasonic Camera and PTZ Control
M1600P Series
Multimode
DISTRIBUTED BY:
MODELS:
MTM1600P - Module Transmitter - Video Source
MRM1600P - Module Receiver - Control Site
RTM1600P - Rack Card Transmitter - Video Source
RRM1600P - Rack Card Receiver - Control Site
FEATURES:
• Video with Reverse Panasonic
Camera and PTZ Control Over One
Multimode Optical Fiber
• Compatible with NTSC; RS-170A & RS-343A and PAL
• Diagnostics: Video, Power and Optical Presence
• Optical AGC
• Full Color Transmission
• PFM Video Transmission
SPECIFICATIONS:
Video:
I/O Level.....................................................1 Vpp
I/O Impedance......................................75 Ohms
Bandwidth.................................................8 MHz
Differential Gain .............................................5%
Differential Phase ............................................5°
SNR ...........................................................60 dB
Connector....................................................BNC
System Data Supports:
Full function Panasonic Up the Coax control protocol.
Optical:
Wavelength.............................................850/1300 nm
Loss Budget (62.5/125µ) ...........................12 dB
Maximum Transmission Distance ............1.6 Km
Connector.......................................................ST
Temperature (Operating):
-20°C to +70°C, non-condensing
Power Supply:
Module - 12 VDC
Rack Card - (See Part #: SR20/2)
Size:
Module - 3
3
⁄4”x 1
5
⁄16”x 5
7
⁄8”
Rack Card requires one rack slot - 6
1
⁄2”x 1”x 5”
The M1600P Series, designed for Panasonic Security System
products, transmits high-quality, simultaneous video with reverse
Panasonic Control Protocol on one multimode optical fiber.
Designed to be used with Panasonic products, these systems
require no field adjustments at installation or additional mainte-
nance thereafter. Diagnostic indicators provide a quick visual
indication of system status. Equipment may be ordered as stand
alone modules or rack cards that are mounted in the Card Cage:
SR20/2. Panasonic products provide full function Bi-directional
video, camera and PTZ control along with full contact closure and
video genlock.
One
Fiber
Video
Gen Lock
Contact Closure
Contact Closure
Camera & PTZ
Control
M1600P
Series
Transceiver
M1600P
Series
Transceiver
Video
Gen Lock
Contact Closure
Contact Closure
Camera & PTZ
Control
– Video
– Up the Coax Control
Panasonic Digital Communications & Security Company
Unit of Matsushita Electric Corporation of America
Security Systems
Executive Office: Three Panasonic Way, Secaucus, NJ 07094
Zone Offices:
Eastern: Three Panasonic Way, Secaucus, NJ 07094 [phone]
Central: 1707 North Randall Road, Elgin, IL 60123 [phone]
Western: 6550 Katella Avenue, Cypress, CA 90630 [phone]
www.panasonic.com/cctv
All products are listed under Closed Circuit Television Equipment
File #E194293, “CE” approved, FCC Compliant Part 15.
Product specifications are subject to change without notice.
©2003 P.D.C.S. All rights reserved.