Operating Instructions

6 Solder the ends of the DC wires to the DC plug. Use

insulation sleeves to insulate the wires.

DC+

A DC plug

B DC wires

C Insulation sleeve

7 Replace the cable covers and then securely fasten

the cable cover screws.

12.6.2 Mounting on a DIN rail

Attach the power supply unit to the DIN rail so that the

bottom hook is positioned at the bottom of the power

supply unit.

1 Hang the top hooks of the power supply unit on the

top of the DIN rail.

R At this

point the power supply unit will be hanging

from the DIN rail but will not be secure.

2 Pull the lever down, make sure the bottom of the

power supply unit is flat against the DIN rail, and then

release to lever.

R The bottom hook will slide up, securing the

bottom of the power supply unit to the DIN rail.

A Top hooks

B Lever

C Bottom hook

12.6.3 Attaching directly to a wall

Attach the power supply unit to the wall securely using

the 2 mounting screws.

12. Installation