mn1000-QRG.book Page 1 Tuesday, February 28, 2017 9:25 AM Important Information and Quick Guide Video Intercom System — Room Monitor Model No. VL-MN1000 Table of contents 1. Introduction 2 2. Important information 3 3. Preparation 7 4. Talking and monitoring features 9 5. Playback and messaging features 10 6. Alarm features 11 7. Lobby station features 13 8. Other information 14 Thank you for purchasing a Panasonic product.
mn1000-QRG.book Page 2 Tuesday, February 28, 2017 9:25 AM 1. Introduction 1. Introduction 1.1 System overview This document explains basic information required to install, configure, and use a VL-MN1000 Room Monitor for use with a Video Intercom System that is comprised of the following devices. R VL-MN1000 Room Monitor R VL-VN1900 Lobby Station R VL-VN1500 Door Station R VL-VN1700 Control Box 1.1.
mn1000-QRG.book Page 3 Tuesday, February 28, 2017 9:25 AM 2. Important information 2. Important information 2.1 Important safety information To prevent severe injury or loss of life or property, and to ensure proper and safe operation of your product, read this section carefully before using the product. Note: R If you are connecting a VL-PS240 power supply unit to the product, refer to the documentation included with the power supply unit for additional safety information. R R R R R WARNING 2.1.
mn1000-QRG.book Page 4 Tuesday, February 28, 2017 9:25 AM 2. Important information sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 2. Use only the power supply unit indicated in this document. SAVE THESE INSTRUCTIONS 2.3 Privacy and rights of portrait When installing or using the product, please take into consideration the rights of others with regard to privacy.
mn1000-QRG.book Page 5 Tuesday, February 28, 2017 9:25 AM 2. Important information Failure to do so may cause condensation to form on the product causing malfunction. R In areas surrounded by a high electrical field, disturbances may occur in the product's image or sound. 2.6 Disclaimer R Recorded data may be altered or deleted as a result of incorrect operations, exposure to static electricity, accidents, malfunction, repairs or other operations.
mn1000-QRG.book Page 6 Tuesday, February 28, 2017 9:25 AM 2. Important information Disposal of Old Equipment (Only for European Union and countries with recycling systems) A This symbol (A) on the products, packaging, and/ or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
mn1000-QRG.book Page 7 Tuesday, February 28, 2017 9:25 AM 3. Preparation A Status bar 3. Preparation 3.1 Device diagrams Displays icons that indicate the room monitor’s status (see 3.4 Status icons (Page 8)). Front view C D E A B Room number C Date and time D Arm mode icon Indicates the current arm mode and allows you to change the arm mode. F Alarm features are armed. G Alarm features are disarmed. H E “Talk” feature button*1 Used to make calls, monitor a camera, view missed calls, etc.
mn1000-QRG.book Page 8 Tuesday, February 28, 2017 9:25 AM 3. Preparation 3.3 Feature screens 3.4 Status icons Tapping a feature button in the home screen displays the corresponding feature screen. Layout and available features vary depending on the screen; the following description applies to most screens. Example: “Talk” screen A Status bar icons Indicates the room monitor is connected to the network. Indicates the room monitor is not connected to the network. Contact facility staff.
mn1000-QRG.book Page 9 Tuesday, February 28, 2017 9:25 AM 4. Talking and monitoring features 4. Talking and monitoring features 4.1 Answering calls 4.3 Monitoring camera images When you receive a call, the room monitor rings. If the other party is using a device with a camera (such as a lobby station), the camera image is also displayed. You can monitor live camera images from lobby stations, your own door stations, and other cameras installed in the facility.
mn1000-QRG.book Page 10 Tuesday, February 28, 2017 9:25 AM 5. Playback and messaging features 5. Playback and messaging features 5.1 Playing video messages from visitors 5.4 Viewing text messages from facility staff Visitors who call you from a lobby station can leave you a video message if you do not answer. Follow this procedure to play your video messages. Facility staff can send text messages to room monitors throughout the facility.
mn1000-QRG.book Page 11 Tuesday, February 28, 2017 9:25 AM 6. Alarm features 6. Alarm features 6.1 Alarm features overview Devices and notifications Commercially available push buttons and sensors can be connected to the room monitor, such as a doorbell, emergency button, gas leak sensor, water leak sensor, etc. When one of these devices is triggered, the room monitor responds accordingly.
mn1000-QRG.book Page 12 Tuesday, February 28, 2017 9:25 AM 6. Alarm features 6.6 Viewing the alarm log The room monitor logs information when alarm features are triggered and saves it in the alarm log. Follow this procedure to view the alarm log. 1 From the home screen, tap “Alarm”. 2 Tap “Alarm Log” on the left side of the screen. 3 Browse the alarm log as needed. R is displayed next to each new item, and disappears when you tap the item. 4 When finished, tap .
mn1000-QRG.book Page 13 Tuesday, February 28, 2017 9:25 AM 7. Lobby station features 7. Lobby station features 7.1 Lobby station overview 7.2 Lobby station operations This section briefly explains how to operate commonly used features of the lobby station. 7.2.1 Calling a resident H A I B 1 Enter the resident’s room number. 2 Press M N to call. 7.2.2 Calling a receptionist 1 Press M 2 Press M 3 Press M C N. N and M N to select the desired item. N to call. D 7.2.
mn1000-QRG.book Page 14 Tuesday, February 28, 2017 9:25 AM 8. Other information 8. Other information 8.1 Specifications Installation method Room Monitor (VL-MN1000) Power source When using PoE: Class 2, IEEE 802.3af When using power supply unit (VL-PS240): 24 V DC, 0.6 A Power consumption Standby: approx. 1.9 W for PoE, 2.1 W for VL-PS240 Operating: approx. 6.3 W for PoE, 6.2 W for VL-PS240 Dimensions (mm) (height × width × depth) Approx. 137.5 ×205×27.
mn1000-QRG.
mn1000-QRG.book Page 40 Tuesday, February 28, 2017 9:25 AM 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan http://www.panasonic.
