Operating instructions

Operating the appliance
CAUTION
To avoid any possible damage to the
mains lead, never run over the cord
or allow it to become caught in the
beater bar assembly.
1 Insert the base of the carrying handle
into the top of the appliance body as
shown. Push in handle and tighten the
handle screw.
Do not overtighten the handle screw.
2 Insert the hose to suction inlet.
Ensure that the 2 hooks of the hose
are completely fitted into the 2 holes
of the suction inlet.
Clicks
Hook
(both side)
Hole
3 Set the hose around the hose clip.
Always place the hose in the clockwise
direction.
4 If the mains lead is at the storage
state, turn the upper cord hook to
release the mains lead.
5 Fix the mains lead into the cord clip to
help secure it during use.
6 Insert the plug into the socket outlet.
Hose clip
How to use the Vacuum Cleaner
Suction inlet
7