Operating Instructions
B-8) ɋɢɫɬɟɦɚɡɚɡɚɤɪɟɩɜɚɧɟ
Park position
ȼɝɨɪɧɚɬɚɡɚɞɧɚɱɚɫɬɧɚɩɪɚɯɨɫɦɭɤɚɱɤɚɬɚɫɟɧɚɦɢɪɚɝɧɟɡɞɨɡɚ
ɡɚɤɪɟɩɜɚɧɟɧɚɩɨɞɨɜɢɹɧɚɤɪɚɣɧɢɤɌɨɦɨɠɟɞɚɫɟɢɡɩɨɥɡɜɚɡɚ
ɡɚɤɪɟɩɜɚɧɟɧɚɧɚɤɪɚɣɧɢɤɚɩɨɜɪɟɦɟɧɚɩɨɱɢɜɤɚɩɪɢɩɨɱɢɫɬɜɚɧɟɬɨ
Ɂɚɛɟɥɟɠɤɚɉɪɟɩɨɪɴɱɜɚɦɟɜɢɩɪɢɩɨɱɢɜɤɚɞɚɢɡɤɥɸɱɜɚɬɟɩɪɚɯɨɫɦɭɤɚɱɤɚɬɚ
Located in the top rear side of the vacuum cleaner, there is a convenient clip
for parking the floor nozzle during breaks when vacuuming.
NOTE: When in the park position, we suggest the appliance is switched off.
Ɂɚɩɨɥɟɫɧɨɢɭɞɨɛɧɨɫɴɯɪɚɧɹɜɚɧɟɧɚɩɪɚɯɨɫɦɭɤɚɱɤɚɬɚɜɴɪɯɭɤɨɪɩɭɫɚɣ
ɢɦɚɝɧɟɡɞɨɡɚɡɚɤɪɟɩɜɚɧɟɧɚɩɨɞɨɜɢɹɧɚɤɪɚɣɧɢɤɩɨɡɜɨɥɹɜɚɳɨɩɪɚɯɨɫɦɭ
ɤɚɱɤɚɬɚɦɚɪɤɭɱɚɢɬɪɴɛɢɬɟɞɚɫɟɩɨɫɬɚɜɹɬɜɴɜɜɟɪɬɢɤɚɥɧɚɩɨɡɢɰɢɹ
For easy storage, the vacuum cleaner includes a clip system built onto the
body of the cleaner, which will keep the extension wand, hose and nozzle in a
vertical position.
& .$.ȾȺɋɔɏɊȺɇəȼȺɌȿɉɊȺɏɈɋɆɍɄȺɑɄȺɌȺ
+2:726725(<285&/($1(5
B-9)ɂɧɞɢɤɚɬɨɪɡɚɡɚɩɴɥɜɚɧɟɬɨɧɚɬɨɪɛɢɱɤɚɬɚɡɚɩɪɚɯ
Dust bag check indicator
Ɂɚɛɟɥɟɠɤɚɉɪɢɦɨɞɟɥɢɬɟɫɪɟɝɭɥɚɬɨɪɧɚɦɨɳɧɨɫɬɬɚɢɧɞɢɤɚɬɨɪɴɬɩɨɤɚɡ
ɜɚɩɪɚɜɢɥɧɨɩɪɢɦɚɤɫɢɦɚɥɧɚɦɨɳɧɨɫɬ
ɂɧɞɢɤɚɬɨɪɴɬɡɚɡɚɩɴɥɜɚɧɟɬɨɟɩɪɟɞɧɚɡɧɚɱɟɧɞɚɜɢɩɨɤɚɡɜɚɫɴɫɬɨɹɧɢɟɬɨ
ɧɚɬɨɪɛɢɱɤɚɬɚɡɚɩɪɚɯɄɨɝɚɬɨɜɴɡɞɭɯɴɬɩɪɟɦɢɧɚɜɚɬɪɭɞɧɨɩɪɟɡɬɨɪɛɢɱɤɚɬɚ
ɡɚɩɪɚɯɜɢɧɞɢɤɚɬɨɪɴɬɫɟɩɨɹɜɹɜɚɠɴɥɬɰɜɹɬȼɬɨɡɢɫɥɭɱɚɣɩɪɨɜɟɪɟɬɟɫɴɫ
ɬɨɹɧɢɟɬɨɧɚɬɨɪɛɢɱɤɚɬɚɢɚɤɨɟɧɟɨɛɯɨɞɢɦɨɹɫɦɟɧɟɬɟ
ɁɚɛɟɥɟɠɤɚȺɤɨɫɥɟɞɫɦɹɧɚɬɚɧɚɬɨɪɛɢɱɤɚɬɚɢɧɞɢɤɚɬɨɪɴɬɩɨɤɚɡɜɚɨɬɧɨɜɨ
ɠɴɥɬɰɜɹɬɩɪɨɜɟɪɟɬɟɞɚɥɢɬɪɴɛɢɬɟɦɚɪɤɭɱɴɬɢɥɢɩɨɞɨɜɢɹɬɧɚɤɪɚɣɧɢɤ
ɧɟɫɚɡɚɩɭɲɟɧɢ
ȼɴɡɦɨɠɧɨɟɩɪɢɢɡɩɨɥɡɜɚɧɟɧɚɫɬɟɫɧɟɧɢɹɧɚɤɪɚɣɧɢɤɜɢɧɞɢɤɚɬɨɪɚɞɚɫɟ
ɩɨɹɜɹɜɚɠɴɥɬɰɜɹɬɌɨɜɚɟɧɨɪɦɚɥɧɨ
NOTE: Check the dust bag condition when the cleaner is at MAX position. (Only
for models with power control).
The dust bag check indicator is a visual aid to advice you of the condition of the
dust bag. A yellow mark will appear in the window when airflow through the dust
bag is insufficient. When this happens, check the dust bag, it may be full or
blocked with fine dust and needs to be replaced.
NOTE: If after having replaced the dust bag, the yellow mark continues appearing
in the window, check to see if the hose or suction inlet is clogged.
The dust indicator mark, can also appear when using the crevice nozzle.










