User Guide

ManualsBrandsPanasonic ManualsVacuum CleanerMC-V9626

CØ1ZCBVØØØØØ

Before operating your vacuum

cleaner, please read these

instructions completely.

Avant d’utiliser l’appareil, il est

recommandé de lire

attentivement ce manuel.

Antes de usar su aspiradora, lea

completamente estas

instrucciones por favor.

VACUUM CLEANER

Aspirateur

Aspiradora

MC-V9626

Operating Instructions

Manuel d’utilisation

Instrucciones de operación

PANASONIC CONSUMER ELECTRONICS COMPANY

DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA

One Panasonic Way

Secaucus, New Jersey 07094

World Wide Web Address

http://www.panasonic.com

If your Panasonic Vacuum Cleaner needs service, look in the yellow pages of the telephone book under

HOME APPLIANCE SERVICE for your nearest Panasonic Services Company (“PASC”) Factory Servicenter,

or PASC authorized Servicenter, or call, 1-800-211-PANA (7262) toll free to find a convenient servicenter. DO

NOT send the pr

oduct to the Executive or Regional Sales offices.They are NOT equipped to make repairs.

If you ship the product

Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a

postage-paid letter to the outside of the carton, which contains a description of your complaint. DO NOT

send the product to the Executive or Regional Sales Offices.They are NOT equipped to make repairs.

Cuando necesita servicio (E.U.)

WHAT TO DO WHEN SERVICE IS NEEDED (U.S.)

Si su aspiradora Panasonic necesita servicio, busque el Centro de Servicio Panasonic o un Centro de Servicio

PASC autorizado más cercano bajo "Servicio de Eléctrodomésticos" en las páginas amarillas de la guía de

teléfonos o llame gratis al 1-800-211-PANA (7262) para encontrar un centro de servicio conveniente. No mande el

producto a las Executive o Regional Sales Offices. No están equipadas para arreglar estos productos.

Si manda el producto

Empaquete con cuidado en el cartón original si posible y mándelo prepagado y con seguro suficiente. Ponga una

carta con sellos en la que describe su problema con el producto en el exterior del cartón. No mande el producto a

las Executive o Regional Sales Offices. No están equipadas para arreglar estos productos.

WARRANTY SERVICE

For product operation and information assistance, please contact your Dealer or our Customer Care Centre at:

Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca

For product repairs, please contact one of the following:

• Your Dealer who will inform you of an authorized Servicentre nearest you.

• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca

• A Panasonic Factory Servicentre listed on warranty page.

RÉP

ARATION SOUS GARANTIE

Pour de l'aide sur le fonctionnement de l'appareil ou pour toute demande d'information, veuillez contacter votre détaillant

ou notre service à la clientèle au :

N° de téléphone : (905) 624-5505 N° de télécopieur : (905) 238-2360 Site Internet : www.panasonic.ca

Pour la réparation des appareils, veuillez consulter :

• votre détaillant, lequel pourra vous renseigner sur le centre de service agréé le plus près de votre domicile ;

• notre service à la clientèle au (905) 624-5505 ou www.panasonic.ca;

• un de nos centres de service .

What to do when service is needed

Service après-vente

(Canada)

PANAMEX COMPANY

DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA

One Panasonic Way

Secaucus, New Jersey 07094

World Wide Web Address

http://www.panasonic.com

ACØ1ZCBVZØØØ Printed in Mexico

CØ1ZCBVØØØØØ

Impreso en Mexico

Imprimé au Mexique

- 52 -

Summary of content (52 pages)

PAGE 1
WHAT TO DO WHEN SERVICE IS NEEDED (U.S.) If your Panasonic Vacuum Cleaner needs service, look in the yellow pages of the telephone book under HOME APPLIANCE SERVICE for your nearest Panasonic Services Company (“PASC”) Factory Servicenter, or PASC authorized Servicenter, or call, 1-800-211-PANA (7262) toll free to find a convenient servicenter. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.
PAGE 2
Garantie CONSUMER INFORMATION Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Please read IMPORTANT SAFETY INSTRUCTIONS on page 5 before use. Read and understand all instructions. Certificat de garantie limitée Panasonic TO OUR VALUED CUSTOMER We are very pleased to welcome you to the Panasonic family of products. Thank you for purchasing this product. Our intent is that you become one of our many satisfied customers.
PAGE 3
Renseignements importants WARRANTY Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
PAGE 4
Información para el consumidor Por favor, lea “Instrucciones importantes de seguridad” en la página 7 antes de usar su aspiradora. Lea y comprenda todas las instrucciones. A NUESTRO CONSUMIDOR ESTIMADO Nos da mucho gusto a presentarle a la familia de productos de Panasonic. Le damos las gracias por comprar este producto. Estamos resueltos a hacerle uno de nuestros muchos consumidores satisfechos. Montaje correcto y uso seguro de su aspiradora son sus responsabilidaes.
PAGE 5
WARRANTY Panasonic Vacuum Cleaner Limited Warranty Panasonic Consumer Electronics Company (collectively referred to as “the warrantor”) will repair this product with new or refurbished parts free of charge, in the U.S.A. or Puerto Rico for one (1) year from the date of original purchase in the event of a defect in materials or workmanship.
PAGE 6
Importantes mesures de sécurité Lors de l’utilisation de l’appareil, prendre certaines précautions, dont les suivantes. Antes de pedir servicio Consulte este cuadro para encontrar soluciones que usted mismo puede realizar cuando tenga problemas menores de rendimiento. Lire attentivement ce manuel avant d’utiliser l’appareil ADVERTENCIA Peligro de choque eléctrico AVERTISSEMENT Desconecte la aspiradora antes de darle servicio o limpiarla.
PAGE 7
Guide de dépannage Instrucciones importantes de seguridad Consultez ce tableau contenant des solutions que vous pourrez exécuter vous-même pour remédier à de petits problèmes de fonctionnement.
PAGE 8
TABLE OF CONTENTS CONSUMER INFORMATION .................................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ....................................................................................5 PARTS IDENTIFICATION................................................................................................... 10-12 ASSEMBLY........................................................................................................................
PAGE 9
Table des matières Tabla de contenido Renseignements importants . . . . . . . . . . 3 Importantes mesures de sécurité . . . . . . . 6 Información para consumidor . . . . . . . . . . 4 Instrucciones importantes de seguridad . . . . . . . . . . . . . . . . . . . . . . 7 Identificación de piezas . . . . . . . . . . 10-12 Nomenclature . . . . . . . . . . . . . . . . . 10-12 Assemblage . . . . . . . . . . . . . . . . . . . . . Tubes . . . . . . . . . . . . . . . . . . . . . . . . Tête motorisée . . . . . .
PAGE 10
PARTS IDENTIFICATION Identificación de piezas Nomenclature Montaje de agitador Assemblage de l’agitateur Rondelle Arandela Bride d’entraînement de brosse Brida de la rueda detada del cepillo Roue d’entraînement de brosse Rueda detada del cepillo Power Nozzle Brosse latérale Tope del cepillo Support de brosse Soporte del cepillo Vis Tornillo Tête motorisée Power Nozzle Support de brosse Soporte del cepillo Cord and Plug Holder Brosses Cepillos Agitateur Barra del batidor Attache du cordon et de l
PAGE 11
PARTS IDENTIFICATION Agitator Assembly Washer Identificación de piezas Nomenclature Agitator Brush Sprocket Agitator Brush Sprocket Flange Canister End Brush Agitator Brush Support Agitator Brush Support Chariot Recepticulo Screw Brushes Agitator Brush Dowel Screw Washer Cord Rewind Button On-Off Switch Interrupteur Interruptor de endendido-apagado Removing Clogs Pédale de rappel du cordon Almacenamiento del cordón eléctrico Attachment Storage Logement des accessoires Almacenamiento para acc
PAGE 12
PARTS IDENTIFICATION Entretien des brosses Identificación de piezas Nomenclature AVERTISSEMENT Hose Tuyau Manguera Handle Poignée Mango Suction Control Réglage de la puissance de l’aspiration Control de aspiratión Hose Latch Tab Languette de blocage du tuyau Hose latch tab Tools Accessoires Herramientas Crevice Tool Suceur plat Herramienta para hendiduras Dusting Brush Brosse à épousseter Cepillo para sacudir Fabric Brush Brosse à tissu Cepillo para telas Cuidado del cepillo ADVERTENCIA Pel
PAGE 13
FEATURE CHART Brush Servicing WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. POWER 120V. AC (60Hz) 12.0 A Overload Protector Headlight ToolsOn-Board Cord Length Cord Reel Yes Yes Yes 20 Ft. (6.
PAGE 14
ASSEMBLY ➢ Faire glisser les rondelles et les supports de brosse sur l’agitateur. ➢ Reinstale las arandelas y los soportes del agitador en el ensamble. ➢ Glisser la nouvelle courroie dans la rainure de l'assemblage de l'agitateur et ensuite par-dessus l'arbre du moteur. ➢ Instale la nueva banda en el pista del agitador, despues sobre la flecha del motor. ➢ S’assurer que la courroie est située sous le protège-courroie. ➢ Asegúrese de que la banda este dentro de la gurda de la banda.
PAGE 15
Replacing Belt Assemblage Montaje Tubes Tubos ➢ Slide washers and agitator supports onto brush agitator unit. ➢ Install new belt in belt groove on the agitator assembly, then over the motor shaft. Motor Shaft Arbre du moteur Eje del transmissión del motor Agitator Assembly Assemblage de l’agitateur Agitator Support Montaje del agitador Support de brosse Soporte del agitador ➢ Snap agitator supports into place. ➢ Tilt cover to back. ➢ Press cover firmly until tabs snap into place.
PAGE 16
Canister ➢ Open canister hood. ➢ Check dust bag (See CHANGING DUST BAG for instructions). Motor Safety Filter ➢ Check filter (See MOTOR SAFETY FILTER CLEANING for instructions). Filtre de sécurité du moteur Filtro Hood ➢ It is normal for the canister hood to come off when it is opened further than needed. ➢ Line up the hinges, insert them, and close the hood to replace it. Hose ➢ Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place.
PAGE 17
Removing Belt ➢ Disconnect cleaner from electrical outlet. ➢ Check and remove hair, string and lint build-up frequently in the POWER NOZZLE brush and brush support areas. ➢ If build-up becomes excessive, disconnect POWER NOZZLE from wand and follow the steps below. Tab Languette Pestaña ➢ Remove light cover and light bulb as shown under “REPLACING HEADLIGHT BULB”. ➢ Unscrew the two (2) POWER NOZZLE cover screws . ➢ Turn POWER NOZZLE over.
PAGE 18
FEATURES Entretien de la tête motorisée Overload Protector Toujours observer toutes les mesures de sécurité avant de nettoyer et d’entretenir la tête motorisée. ➢ The overload protector stops the POWER NOZZLE motor when the brush jams and prevents belt breakage. NOTE: Canister motor will continue to run. Overload Protector Protecteur de surcharge Protector contra sobrecargas TO CORRECT PROBLEM: ➢ Unplug electrical cord. ➢ Check brush and brush support areas for excessive lint build-up or jamming.
PAGE 19
POWER NOZZLE CARE Always follow all safety precautions when cleaning and servicing the POWER NOZZLE. WARNING Electrical Shock or Personal Injury Hazard. Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. Replacing Headlight Bulb ➢ To remove light cover use a flat blade screwdriver, gently prying one side of the light cover up. ➢ After freeing one side, lift up to remove.
PAGE 20
TO OPERATE CLEANER Power Cord NOTE: To reduce the risk of electrical shock, this vacuum has a polarized plug, one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT CHANGE THE PLUG IN ANY WAY. Only use outlets near the floor. ➢ Pull cord out of canister to desired length.
PAGE 21
Motor Safety Filter Cleaning ➢ Check motor safety filter occasionally and clean when dirty. ! WARNING Electrical Shock Hazard Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock. ➢ Unplug cord from wall outlet.
PAGE 22
Handle Adjustments ➢ Lower wand from upright position by pressing on the handle release pedal. Pile Height Indicator Indicateur de la hauteur des brosses Indicator de nivel de pelo de la alfombra ➢ Select a pile height setting by pressing the small pedal on the rear. The pile height setting is shown in the window.
PAGE 23
ROUTINE CARE OF CLEANER Changing Dust Bag Always operate vacuum with genuine Panasonic micron dust bag type C-5 installed. Panasonic dust bags may be purchased through any authorized Panasonic dealer or ordered from service company. ➢ Unplug cord from wall outlet. Ajustes del mango Réglage de l’inclinaison du manche ➢ Baisser le manche depuis sa position verticale en appuyant sur la pédale de dégagement du manche.
PAGE 24
Using Tools ! Sugerencias para aspirar Conseils pratiques CAUTION DO NOT attach or remove handle or wands while cleaner is ON. This could cause sparking and damage the electrical contacts. ATTACHMENTS ON HANDLE ➢ If the POWER NOZZLE is attached, turn cleaner off before removing handle from wands. ➢ Press lock button, then pull to remove handle from wand. ➢ Slide attachments firmly on handle as needed (See chart, page 26).
PAGE 25
Vacuuming Tips Suggested sweeping pattern For best cleaning action, the POWER NOZZLE should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the POWER NOZZLE should be changed to point into the next section to be cleaned. This pattern should be continued across the rug with slow, gliding motions. ➢ Fast, jerky motions do not provide complete cleaning. ➢ Small areas can be cleaned without moving the canister.
PAGE 26
Using Tools Uso de herramientas Utilisation des accessoires ➢ The Dusting Brush may be used on the following items: • Furniture • Drapes • Stairs • Walls ➢ La brosse à épousseter peut être utilisée dans les conditions suivantes: • Meubles • Rideaux • Escaliers • Murs ➢ El cepillo para sacudir puede ser usado en las siguientes partes: • Muebles • Cortinas • Escaleras • Paredes ➢ The Crevice Tool may be used on the following items: • Furniture • Cushions • Drapes • Stairs • Walls ➢ Le suceur plat peut
PAGE 27
Using Tools Uso de herramientas Utilisation des accessoires ➢ The Dusting Brush may be used on the following items: • Furniture • Drapes • Stairs • Walls ➢ La brosse à épousseter peut être utilisée dans les conditions suivantes: • Meubles • Rideaux • Escaliers • Murs ➢ El cepillo para sacudir puede ser usado en las siguientes partes: • Muebles • Cortinas • Escaleras • Paredes ➢ The Crevice Tool may be used on the following items: • Furniture • Cushions • Drapes • Stairs • Walls ➢ Le suceur plat peut
PAGE 28
Vacuuming Tips Suggested sweeping pattern For best cleaning action, the POWER NOZZLE should be pushed straight away from you and pulled straight back. At the end of each pull stroke, the direction of the POWER NOZZLE should be changed to point into the next section to be cleaned. This pattern should be continued across the rug with slow, gliding motions. ➢ Fast, jerky motions do not provide complete cleaning. ➢ Small areas can be cleaned without moving the canister.
PAGE 29
Using Tools ! Sugerencias para aspirar Conseils pratiques CAUTION DO NOT attach or remove handle or wands while cleaner is ON. This could cause sparking and damage the electrical contacts. ATTACHMENTS ON HANDLE ➢ If the POWER NOZZLE is attached, turn cleaner off before removing handle from wands. ➢ Press lock button, then pull to remove handle from wand. ➢ Slide attachments firmly on handle as needed (See chart, page 26).
PAGE 30
ROUTINE CARE OF CLEANER Changing Dust Bag Always operate vacuum with genuine Panasonic micron dust bag type C-5 installed. Panasonic dust bags may be purchased through any authorized Panasonic dealer or ordered from service company. ➢ Unplug cord from wall outlet. Ajustes del mango Réglage de l’inclinaison du manche ➢ Baisser le manche depuis sa position verticale en appuyant sur la pédale de dégagement du manche.
PAGE 31
Handle Adjustments ➢ Lower wand from upright position by pressing on the handle release pedal. Pile Height Indicator Indicateur de la hauteur des brosses Indicator de nivel de pelo de la alfombra ➢ Select a pile height setting by pressing the small pedal on the rear. The pile height setting is shown in the window.
PAGE 32
Motor Safety Filter Cleaning ➢ Check motor safety filter occasionally and clean when dirty. ! WARNING Electrical Shock Hazard Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock. ➢ Unplug cord from wall outlet.
PAGE 33
TO OPERATE CLEANER Power Cord NOTE: To reduce the risk of electrical shock, this vacuum has a polarized plug, one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT CHANGE THE PLUG IN ANY WAY. Only use outlets near the floor. ➢ Pull cord out of canister to desired length.
PAGE 34
POWER NOZZLE CARE Always follow all safety precautions when cleaning and servicing the POWER NOZZLE. WARNING Electrical Shock or Personal Injury Hazard. Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. Replacing Headlight Bulb ➢ To remove light cover use a flat blade screwdriver, gently prying one side of the light cover up. ➢ After freeing one side, lift up to remove.
PAGE 35
FEATURES Entretien de la tête motorisée Overload Protector Toujours observer toutes les mesures de sécurité avant de nettoyer et d’entretenir la tête motorisée. ➢ The overload protector stops the POWER NOZZLE motor when the brush jams and prevents belt breakage. NOTE: Canister motor will continue to run. Overload Protector Protecteur de surcharge Protector contra sobrecargas TO CORRECT PROBLEM: ➢ Unplug electrical cord. ➢ Check brush and brush support areas for excessive lint build-up or jamming.
PAGE 36
Removing Belt ➢ Disconnect cleaner from electrical outlet. ➢ Check and remove hair, string and lint build-up frequently in the POWER NOZZLE brush and brush support areas. ➢ If build-up becomes excessive, disconnect POWER NOZZLE from wand and follow the steps below. Tab Languette Pestaña ➢ Remove light cover and light bulb as shown under “REPLACING HEADLIGHT BULB”. ➢ Unscrew the two (2) POWER NOZZLE cover screws . ➢ Turn POWER NOZZLE over.
PAGE 37
Canister ➢ Open canister hood. ➢ Check dust bag (See CHANGING DUST BAG for instructions). Motor Safety Filter ➢ Check filter (See MOTOR SAFETY FILTER CLEANING for instructions). Filtre de sécurité du moteur Filtro Hood ➢ It is normal for the canister hood to come off when it is opened further than needed. ➢ Line up the hinges, insert them, and close the hood to replace it. Hose ➢ Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place.
PAGE 38
Replacing Belt Assemblage Montaje Tubes Tubos ➢ Slide washers and agitator supports onto brush agitator unit. ➢ Install new belt in belt groove on the agitator assembly, then over the motor shaft. Motor Shaft Arbre du moteur Eje del transmissión del motor Agitator Assembly Assemblage de l’agitateur Agitator Support Montaje del agitador Support de brosse Soporte del agitador ➢ Snap agitator supports into place. ➢ Tilt cover to back. ➢ Press cover firmly until tabs snap into place.
PAGE 39
ASSEMBLY ➢ Faire glisser les rondelles et les supports de brosse sur l’agitateur. ➢ Reinstale las arandelas y los soportes del agitador en el ensamble. ➢ Glisser la nouvelle courroie dans la rainure de l'assemblage de l'agitateur et ensuite par-dessus l'arbre du moteur. ➢ Instale la nueva banda en el pista del agitador, despues sobre la flecha del motor. ➢ S’assurer que la courroie est située sous le protège-courroie. ➢ Asegúrese de que la banda este dentro de la gurda de la banda.
PAGE 40
FEATURE CHART Brush Servicing WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. POWER 120V. AC (60Hz) 12.0 A Overload Protector Headlight ToolsOn-Board Cord Length Cord Reel Yes Yes Yes 20 Ft. (6.
PAGE 41
PARTS IDENTIFICATION Entretien des brosses Identificación de piezas Nomenclature AVERTISSEMENT Hose Tuyau Manguera Handle Poignée Mango Suction Control Réglage de la puissance de l’aspiration Control de aspiratión Hose Latch Tab Languette de blocage du tuyau Hose latch tab Tools Accessoires Herramientas Crevice Tool Suceur plat Herramienta para hendiduras Dusting Brush Brosse à épousseter Cepillo para sacudir Fabric Brush Brosse à tissu Cepillo para telas Cuidado del cepillo ADVERTENCIA Pel
PAGE 42
PARTS IDENTIFICATION Agitator Assembly Washer Identificación de piezas Nomenclature Agitator Brush Sprocket Agitator Brush Sprocket Flange Canister End Brush Agitator Brush Support Agitator Brush Support Chariot Recepticulo Screw Brushes Agitator Brush Dowel Screw Washer Cord Rewind Button On-Off Switch Interrupteur Interruptor de endendido-apagado Removing Clogs Pédale de rappel du cordon Almacenamiento del cordón eléctrico Attachment Storage Logement des accessoires Almacenamiento para acc
PAGE 43
PARTS IDENTIFICATION Identificación de piezas Nomenclature Montaje de agitador Assemblage de l’agitateur Rondelle Arandela Bride d’entraînement de brosse Brida de la rueda detada del cepillo Roue d’entraînement de brosse Rueda detada del cepillo Power Nozzle Brosse latérale Tope del cepillo Support de brosse Soporte del cepillo Vis Tornillo Tête motorisée Power Nozzle Support de brosse Soporte del cepillo Cord and Plug Holder Brosses Cepillos Agitateur Barra del batidor Attache du cordon et de l
PAGE 44
Table des matières Tabla de contenido Renseignements importants . . . . . . . . . . 3 Importantes mesures de sécurité . . . . . . . 6 Información para consumidor . . . . . . . . . . 4 Instrucciones importantes de seguridad . . . . . . . . . . . . . . . . . . . . . . 7 Identificación de piezas . . . . . . . . . . 10-12 Nomenclature . . . . . . . . . . . . . . . . . 10-12 Assemblage . . . . . . . . . . . . . . . . . . . . . Tubes . . . . . . . . . . . . . . . . . . . . . . . . Tête motorisée . . . . . .
PAGE 45
TABLE OF CONTENTS CONSUMER INFORMATION .................................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ....................................................................................5 PARTS IDENTIFICATION................................................................................................... 10-12 ASSEMBLY........................................................................................................................
PAGE 46
Guide de dépannage Instrucciones importantes de seguridad Consultez ce tableau contenant des solutions que vous pourrez exécuter vous-même pour remédier à de petits problèmes de fonctionnement.
PAGE 47
Importantes mesures de sécurité Lors de l’utilisation de l’appareil, prendre certaines précautions, dont les suivantes. Antes de pedir servicio Consulte este cuadro para encontrar soluciones que usted mismo puede realizar cuando tenga problemas menores de rendimiento. Lire attentivement ce manuel avant d’utiliser l’appareil ADVERTENCIA Peligro de choque eléctrico AVERTISSEMENT Desconecte la aspiradora antes de darle servicio o limpiarla.
PAGE 48
WARRANTY Panasonic Vacuum Cleaner Limited Warranty Panasonic Consumer Electronics Company (collectively referred to as “the warrantor”) will repair this product with new or refurbished parts free of charge, in the U.S.A. or Puerto Rico for one (1) year from the date of original purchase in the event of a defect in materials or workmanship.
PAGE 49
Información para el consumidor Por favor, lea “Instrucciones importantes de seguridad” en la página 7 antes de usar su aspiradora. Lea y comprenda todas las instrucciones. A NUESTRO CONSUMIDOR ESTIMADO Nos da mucho gusto a presentarle a la familia de productos de Panasonic. Le damos las gracias por comprar este producto. Estamos resueltos a hacerle uno de nuestros muchos consumidores satisfechos. Montaje correcto y uso seguro de su aspiradora son sus responsabilidaes.
PAGE 50
Renseignements importants WARRANTY Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
PAGE 51
Garantie CONSUMER INFORMATION Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Please read IMPORTANT SAFETY INSTRUCTIONS on page 5 before use. Read and understand all instructions. Certificat de garantie limitée Panasonic TO OUR VALUED CUSTOMER We are very pleased to welcome you to the Panasonic family of products. Thank you for purchasing this product. Our intent is that you become one of our many satisfied customers.
PAGE 52
WHAT TO DO WHEN SERVICE IS NEEDED (U.S.) If your Panasonic Vacuum Cleaner needs service, look in the yellow pages of the telephone book under HOME APPLIANCE SERVICE for your nearest Panasonic Services Company (“PASC”) Factory Servicenter, or PASC authorized Servicenter, or call, 1-800-211-PANA (7262) toll free to find a convenient servicenter. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.