Operating Instructions Vacuum Cleaner MC-E464, MC-E468, MC-E469 Shop Panasonic For Accessories and Consumables visit our web site at www.panasonic.co.uk (for customers in the UK only) Panasonic We would recommend that you read these Operating Instructions before attempting to operate the unit and that you note the Important Safety Instructions. Please keep in a safe place with your Authorised Dealer Service booklet. This product complies with the directives 73/23/EEC and 89/336/EEC.
TABLE OF CONTENTS Page • Caution for AC Mains Lead (UK, IRL only) . . . . . .2 • Important Safety Instructions for the user . . . . . .3 • Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 • Identification of main parts . . . . . . . . . . . . . . . . . .4 HOW TO ASSEMBLE / OPERATE YOUR CLEANER A) Handle assembly . . . . . . . . . . . . . . . . . . . . . . . .5 B) Power cord release / storage . . . . . . . . . . . . . . .5 C) ON/OFF Switch . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER When using this vacuum cleaner, please observe these basic precautions. WARNING: To reduce the risk of fire, electric shock, or injury: • Do not leave the vacuum cleaner plugged in to mains socket. Unplug from the socket when not in use and before cleaning the appliance or undertaken maintenance operations. • Electric shocks can occur if used outdoors or on wet surfaces.
IDENTIFICATION OF MAIN PARTS A-1) Handle B-2) Cord clip J) Dust bag check indicator D) Variable power control (MC-E469 only) C) ON/OFF Switch Carrying handle Dust bag cover Clean air filter E) Foot pedal Furniture guard Cleaning head F) Beater bar switch (except MC-E464) A-3) Upper cord hook B-1) Power cord A-2) Hose clip A-3) Lower cord hook/ Carrying handle Paper dust bag Extension wand Crevice nozzle 4 Dusting brush Hose
HOW TO ASSEMBLE / OPERATE YOUR CLEANER A) HANDLE ASSEMBLY Upper cord hook Hose clip Lower cord hook/ Carrying handle 1) Insert the base of the handle into the top of the body of the machine as shown. Push in handle and tighten the screw. 2) Set the hose around the hose clip. NOTE: Always place the hose in the clockwise direction. 3) Turn the upper cord hook in the upright position and wind the power cord around the upper and lower cord hooks. IMPORTANT: Do not overtighten the screw.
D) VARIABLE POWER CONTROL (MC-E469 only) These vacuum cleaners incorporate a variable power control to select the most suitable power required for your cleaning needs. MC-E452 MC-E457 MIN: To clean curtains and soft furnishing’s etc., with tool attached. MAX: To clean with high suction continuously on carpets. E) HANDLE ADJUSTMENT BY FOOT PEDAL To lower the body of the cleaner, step on the pedal at the left rear corner of the vacuum cleaner.
F) BEATER BAR SWITCH (Except MC-E464) When cleaning carpeted surfaces, slide the switch to the “BEATER BAR” position. When cleaning on hard floors or when using the accessories, slide the switch to the “STOP” position to stop the brush from rotating. SWITCH BEATER BAR ON OR OFF B B A E NOTE: Ensure that the vacuum cleaner is switched on before moving the beater bar switch.
I) HOW TO USE THE ACCESSORIES 1) To use the accessories keep the vacuum cleaner in upright position and slide the beater bar switch to " STOP " position to stop the beater bar rotating. NOTE: Excepting for model MC-E464. Hose support 2) Pull out the hose from the rear side of the vacuum cleaner and remove the hose from the hose clip and support. Then connect any accessory as illustrated.
MAINTENANCE AND SERVICING IMPORTANT NOTE: Before servicing any part, always DISCONNECT THE CLEANER FROM THE ELECTRICITY MAINS HOW TO CHANGE THE DUST BAG 1) Remove dust cover simply pulling it forwards. 2) Grip the cardboard of the dust bag and pull out. IMPORTANT: Dust bags should be changed regularly for the maximum efficiency of the filters and prolonged motor efficiency. 3) Install the dust bag by pressing the cardboard as shown.
BLOCKAGES If your cleaner stops picking up dust, or the dust bag check indicator shows "Full" while the dust bag is still empty, a blockage may have occurred. Remove the hose from the suction inlet, push the smalls clips inwards, turn the hose right and pull it upwards (Fig. 1). Clear any obstruction from the hose and/or suction inlet using a blunt implement, taking care not to damage the hose. If the obstruction occurs in the suction pipe inlet, it can be removed with care as shown in Fig. 2.
SERVICING AND REPAIRS Before replacing any part DISCONNECT THE CLEANER FROM THE MAINS SUPPLY. We always recommend you use genuine Panasonic replacement parts only. If you have any query, contact your local Panasonic dealer / service agent. To replace any of the following parts, place the vacuum cleaner in the horizontal position by using the pedal. Then turn it over exposing the underside. HOW TO REPLACE - DRIVE BELT TYPE UB-1L / BEATER BAR ASSEMBLY RE BEFO R VE PLUG IS CO VE TH REMO VING REMO 1.
TROUBLE SHOOTING GUIDE Before returning the vacuum cleaner to a Panasonic Service Centre, check the following points: Check Point Trouble Motor fails to rotate (no noise is heard at all). Cause / Remedy • Mains plug connection. • Mains plug connected firmly and mains outlet is on. • Check fuse and replace if blown. • Mains plug fuse. Motor runs but no suction. • Hose inlet clogged. • Check dust indicator. • Paper bag broken. • Central filter. • If there is a blockage, remove it.
Vacuum Cleaner Consumables / Accessories (for customers in the UK only) DESCRIPTION MC-E464 MC-E468 MC-E469 Handle Product code AMC8H99G1061 Product code Product code AMC8H99G1020 AMC8H99G10Z3 Product code AMC8H10B1000 Product code Product code AMC8H10B1000 AMC8H10B1000 Product code AMC8F28G1000 Product code AMC8F28G1000 Product code AMC8F28G1000 Product code AMC8F0391100 Product code AMC8F0391100 Product code AMC8F0391100 Extension wand Product code AMC8A1291034 Product code AMC8A1291034 P
REMINDER FOR CUSTOMER The model and serial number of this product may be found on the name plate located at the back of your cleaner. You should note the model and serial number in the spaces provided and retain this book for a future reference. Model Number: .............................................................. Serial Number: ............................................................... Date Purchased: ............................................................ Where Purchased: ...............
