Datasheet

No. SX-DSV03025 - 16 -
Motor Business Unit, Panasonic Corporation
6-2 USB connector X1
By connecting to a computer or a controller via USB interface, the following operations are available
parameter reference / change parameter save / load monitoring of status checking alarm status or alarm history
Name Symbol
Connector
pin No
Description
USB signal
VBUS 1
 Communicate with a computer or a controller D- 2
D+ 3
For manufacturer use
−
4  Do not connect
Signal ground GND 5  Signal ground
6-3 Serial bus connector X2
Name Symbol
Connector
pin No
Description
Signal ground GND 1  Signal ground (*Note 1)
NC - 2  Do not connect
RS232 signal
TXD 3
 Serial bus transmission and reception data
(RS232)
RXD 4
RS485 signal
485 -
5
 Serial bus transmission and reception data
(RS485)
7
485+
6
8
Frame ground FG shell  Frame ground
Note 1) The signal ground GND is connected with the control circuit ground connected with the connector X4 .