Datasheet

6
SLF series
F96
Pull wire
without
reset for
simple stop
F98
Pull wire with
reset for
emergency stop
SLF series
30mm metal casing
1 cable inlet. IP 66
Contact blocks
Z11 (1NO+1NC) SL•F96Z11M SL•F98Z11M
Z02 (2NC) SL•F96Z02M SL•F98Z02M
X11 (1NO+1NC) SL•F96X11M SL•F98X11M
Y11 (1NO+1NC) SL•F96Y11M SL•F98Y11M
W02 (2NC) SL•F96W02M SL•F98W02M
Electrical Connection
Replace the symbol “ •” with the required
thread:
1: for PG 13,5 Cable Gland
2: for 1/2” NPT Cable Gland
(with adapter in MA150 and MA160 series)
3: for PG11 Cable Gland
4: for M16 x 1,5 Cable Gland
5: for M20 x 1,5 Cable Gland
Ordering Code SLF (M) series :
S L 1 F 9 6 Z 1 1 (M)
Metal casing
F96 = 30mm, pull wire w.o. reset
F98 = 30mm, pull wire with reset
F596 = 50mm, pull wire w.o. reset
F598 = 50mm, pull wire with reset
Electrical connection
see top of page
SLF series
50mm metal casing.
3 cable inlet. IP 66
Contact blocks
Z11 (1NO+1NC) SL•F596Z11M SL•F598Z11M
Z02 (2NC) SL•F596Z02M SL•F598Z02M
X11 (1NO+1NC) SL•F596X11M SL•F598X11M
Y11 (1NO+1NC) SL•F596Y11M SL•F598Y11M
W02 (2NC) SL•F596W02M SL•F598W02M
Z11: Snap action contacts (1NO+1NC)
Z02: Snap action contacts (2NC)
X11: Non overlapping
 Slow action contacts (1NO+1NC)
Y11: Overlapping
  Slow action contacts (1NO+1NC)
W02: Slow action contacts (2NC)
Contact blocks
Available contact blocks
Z11: Snap action 1NO + 1NC Z02: Snap action 2NC X11: Slow action break before
make 1NO + 1NC
Y11: Slow action make before
break 1NO + 1NC
W02: Simultaneous slow action
2NC