Operating instructions

8
Settings
In the stand-by mode, the display is blank. When the ringer is set to
OFF, “” will be displayed when you lift the handset or press
(SP-PHONE/HEADSET).
• To cancel during programming, replace the handset. Start again from
step 1.
• If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset and start again from step 1.
(PROGRAM)
Turning the Ringer On/Off
When set to OFF, the unit will not ring. Your phone comes from the factory
set to ON.
1
Lift the handset.
2
Press (PROGRAM).
• “” is displayed.
3
Press (9).
4
To turn OFF, press (0).
OR
To turn ON, press (1).
5
Press (PROGRAM).
• A beep sounds on the handset.
• When set to OFF,
“” is displayed.
6
Replace the handset.
Ex. OFF is selected.