Operating instructions

15
Advanced Operation
1
Lift the handset.
2
Press (PROGRAM).
• “” is displayed.
3
Press (LOWER) to select a lower
memory location.
• “” is displayed.
4
Press one of the one-touch auto
dial buttons.
• “” is displayed.
5
Enter a phone number up to 21 digits.
• The entered number is displayed.
6
Press (PROGRAM).
• A beep sounds on the
handset.
7
Replace the handset.
• To store other
numbers, repeat
steps 1 through 7.
To store in a LOWER memory location
• If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a
phone number counting as one digit (p. 20).
• To cancel during programming, replace the handset. Start again from
step 1.
• If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset and start again from step 1.
• You can keep the stored numbers confidential. See page 16.
One-Touch Auto
Dial Buttons
(LOWER)
(PROGRAM)
(REDIAL/PAUSE)