User guide

ManualsBrandsPanasonic ManualsPDAsKXTS730S

PQQW14728XA F0305-2055 D

Please read the operating instructions for further details.

Connections

Note:

L Use only the included Panasonic AC adaptor PQLV10 (9V/850 mA).

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel

warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.

Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the

adaptor may cause it to become disconnected.

L The unit will not work during a power failure.

To disconnect the

interface cable, pull

out the cable while

pushing the tabs.

AC adaptor

Telephone

line cord

To single-line

telephone jack

(RJ11C)

To power outlet (120 V AC, 60 Hz)

Hooks

Interface cable

Bottom of the

interface box

Interface box

Fasten the

AC adaptor

cord.

Fasten the

interface cable.

Model No. KX-TS730

Quick Guide

E-PQQW14728XA.fm 1 ページ２００５年６月３日　金曜日　午前１０時４分

Summary of content (6 pages)

PAGE 1
E-PQQW14728XA.fm 1 ページ２００５年６月３日金曜日午前１０時４分 KX-TS730 Model No. Quick Guide Please read the operating instructions for further details. Connections 1 Interface box Interface cable To disconnect the interface cable, pull out the cable while pushing the tabs. 2 To power outlet (120 V AC, 60 Hz) AC adaptor Fasten the interface cable. Fasten the AC adaptor cord.
PAGE 2
E-PQQW14728XA.fm 2 ページ２００５年６月３日金曜日午前１０時４分 {<} and {>} keys / Function keys The keys work as the speaker volume keys. Pressing the keys allows you to scroll through function menu. Pressing the keys allows you to enter the caller list. By pressing a function key, you can select the function displayed directly above it.
PAGE 3
E-PQQW14728XA.fm 3 ページ２００５年６月３日金曜日午前１０時４分 Recording/Playing back a conversation Feature Operation To record a conversation Press {REC.} ({F1} key), while talking. L To stop recording, press {STOP}. To play back a recorded conversation Press {PLAY} ({F1} key). To stop playback Press {STOP}. To change fast-forward speed Press {FF} ({F3} key). L Each time you press, the speed will change (four times or sixty times normal speed). To change rewind speed Press {REW} ({F1} key).
PAGE 4
E-PQQW14728XA.fm 4 ページ２００５年６月３日金曜日午前１０時４分 Phonebook Adding items to the phonebook 1 2 3 5 Press {k} ({F3} key). L The display shows the number of items in the phonebook. Enter phone no. Press {ADD} ({F1} key). >=Go back Enter the name (max. 16 characters). Enter name [ABC] 6 Press {SET} or {SAVE} ({F3} key). L To add other items, repeat from step 2. 7 Press {STOP}. >=Go back CHAR. 4 Enter the phone number (max. 32 digits). Press {SET}.
PAGE 5
E-PQQW14728XA.fm 5 ページ２００５年６月３日金曜日午前１０時４分 Programming via direct commands You can program most features using “direct commands”—special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit’s sub-menus. 1 Press {MENU} ({F2} key), then press {#}. Enter direct No. : BACK 2 3 Enter the desired feature code (shown below). 4 5 Press {SAVE} ({F3} key). Enter the desired setting code (shown below).
PAGE 6
E-PQQW14728XA.