TH111_QG(e).fm Page 1 Monday, June 5, 2006 3:38 PM Model No. KX-TH111 Quick Guide Setting up Base unit CHARGE 6 HOURS Use only the included Panasonic AC adaptor PQLV206. “Click” To single-line telephone jack (RJ11C) Confirm the charge indicator is on. Hook Noise filter (For DSL Service users) “Click” (120 V AC, 60 Hz) Press plug firmly. Handset B A C D For further information, visit http://www.panasonic.
TH111_QG(e).fm Page 2 Monday, June 5, 2006 3:38 PM Operating tips { }: indicates button names/soft key names. Using the joystick The handset joystick can be used to navigate through menus and to select items shown on the display, by pushing it up {^}, down {V}, left {<}, or right {>}. Adjusting audio volume Push the joystick up {^} or down {V} repeatedly while talking. Handset soft keys The handset features 2 soft keys and a joystick.
TH111_QG(e).fm Page 3 Monday, June 5, 2006 3:38 PM Basic operation (Handset) Feature Operation Adjusting the receiver/ speaker volume Push the joystick {^} or {V} repeatedly while talking. Viewing the caller list and calling back 1 {MENU} (center of joystick) i G i {SELECT} 2 Push {V} to search from the most recent call, or {^} to search from the oldest call. 3 {C} Ringer volume 1 {MENU} (center of joystick) i {#}{1}{6}{0} 2 Select the desired volume.
TH111_QG(e).fm Page 4 Monday, June 5, 2006 3:38 PM Continued Answering system (Base unit) Feature Operation Erasing a message Press {ERASE} during playback. Using the answering system remotely 1 Dial your phone number from a touch tone phone. 2 After the greeting message starts, enter your remote code. (Default remote code is “11”.) L The unit plays back new messages including memo messages. L After playing back new messages, the voice guidance starts. 3 Follow the voice guidance as necessary.
TH111_QG(e).fm Page 5 Monday, June 5, 2006 3:38 PM Quick troubleshooting 1 Handset shows: “No link to base. Move closer to base and try again.” Place the handset on the base unit, then check if the charge indicator is on. The charge indicator is OFF. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. The charge indicator is still OFF. The charge indicator is ON. The charge indicator is ON, now. Lift the handset, then try again.
TH111_QG(e).fm Page 6 Monday, June 5, 2006 3:38 PM Quick troubleshooting 2 No dial tone is heard from handset. Lift up the handset from the base unit. Press {C} (TALK) at the handset, then check if the display shows “Talk”. No link to base. Move closer to base and try again. {C} “No link to base. Move closer to base and try again.” is displayed. “Talk” is displayed. IN USE Talk 00-00-00 PRIVACY MENU QUICK Press {s} (SP-PHONE), then check if the dial tone is heard from the speaker on the back.
TH111_QG(e).fm Page 7 Monday, June 5, 2006 3:38 PM Registering a handset to base unit The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset. Handset Press {MENU} (center of joystick), then press {#}{1}{3}{0}. CID QUICK {MENU} Base unit Press and hold {INTERCOM} until the IN USE indicator flashes. L Complete next step within 2 minutes. Handset Press {OK} (right soft key).
TH111_QG(e).fm Page 8 Monday, June 5, 2006 3:38 PM IMPORTANT! If your product is not working properly. . . 1 Read the Operating Instructions L If lost, you can download your Operating Instructions at http://www.panasonic.com/phonehelp 2 Visit our website: http://www.panasonic.com/phonehelp L FAQs and troubleshooting hints are available. 3 Contact us via the web at: http://www.panasonic.
