Quick Start Guide

– 2 –
Battery charging
2 rechargeable Ni-MH batteries are installed in the handset at the time of shipment.
Before initial use: Remove the yellow insulation sheet before using the handset.
Charge for about 7 hours.
Note for handset:
L USE ONLY rechargeable Ni-MH batteries AAA (R03)
size
.
L Do NOT use alkaline/manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
L Follow the directions on the display to set up the unit.
L Confirm “Charging” is displayed
() .
2 rechargeable Ni-MH batteries are installed in the base unit at the time of shipment. These batteries can be
used to supply power to the base unit in the event of a power failure.
Before initial use: Remove the yellow insulation sheet before using the base unit.
Charge for about 15 hours.
Operating tips
Soft keys
By pressing a soft key, you can select the feature shown
directly above it on the display. Pay attention to the
display to see what functions the soft keys are assigned
during operation.
Navigator key
− {^}, {V}, {<}, or {>}: Scroll through various lists and
items.
− VOL. (Volume: {^} or {V}): Adjust the receiver or
speaker volume while talking.
− {<} k: View the phonebook entry.
− {>} REDIAL: View the redial list.
− {V} CID (Caller ID): View the caller list.
Volume key
Press {+} or {-} repeatedly when:
− adjusting the ringer volume.
− adjusting the receiver or speaker volume while
talking.
Handset
1
1
Base unit
{V}
{^}
{<}
{>}
TGM43x_QG(en-en).fm Page 2 Tuesday, April 19, 2016 3:06 PM